Ordered Switched Bypass Kit 2010+

Troyz · 07-25-2013, 10:22 AM

I opted for the switch since its only wires and a relay and didn't have the complexity of a remote (which I could easily loose) or using external power for a receiver.

Do I need to pry off the buttons on my radio to remove it?

When routing the wires do I need to secure them with twist ties or anything?

kenchan · 07-25-2013, 02:42 PM

Quote:

Originally Posted by Troyz

When routing the wires do I need to secure them with twist ties or anything?

twist ties

kenchan · 07-25-2013, 02:44 PM

Amazon.com: 100 Black Nylon Cable Zip Ties Self Locking 2.5mm x 4": Arts, Crafts & Sewing

logenl7 · 07-25-2013, 02:51 PM

hahahahaha

TreeSemdyZee · 07-25-2013, 05:20 PM

Ok. My first question is, WTF are you talking about?

Second is, why start a new thread on the same topic that you started before?

kenchan · 07-25-2013, 05:45 PM

i think he's talking about the nav/dvd bypass circuit so he can run it while driving.

he doesn't want the automatic one that has a built-in delay relay. he wants a mechanical spst sw, i think...

not sure about the "prying off the buttons to remove it" part though...

bigaudiofanat · 07-25-2013, 07:08 PM

You can just interrupt the remote blue wire of the circuit bypass and add a switch. Other than that I have no idea what he is talking about.

Troyz · 07-31-2013, 11:13 AM

I have a couple of questions. I am new at this. The instructions never mentioned disconnecting the battery. Should I do that? I don't want to deploy and air bag or something crazy.

It became obvious from other threads removing the gear shift knob for an M6 is not easily done; I will work around that. Everything else looks straight forward except where to rout the wires to the switch itself by the cup holder.

So I can take some pride and be able to remove this at anytime I am opting to do it myself.

Is there anything I need to be careful about besides keeping track of a few dozen screws?

Chuck33079 · 07-31-2013, 11:16 AM

It never hurts to disconnect the battery when you're working with wiring.

kenchan · 07-31-2013, 11:44 AM

Ordered Switched Bypass Kit 2010+

Troyz · 07-31-2013, 12:37 PM

I swapped the remote kit for the switched version. Now that the threads are combined into a one you can see the gaps. I had little time to review my posts at work.

The switched version of the Bypass Switch came with detailed colored instructions printed out.

Troyz · 08-05-2013, 10:11 AM

I installed it myself. Not rocket science but

you had to get everything off to get behind the Navigation Unit. The plug and play was idiot proof. Its very handy to have all the controls available when you drive esp the backup camera.

630Z · 08-07-2013, 08:00 PM

I just finished up installing the switched override harness along with the harness to incorporate a camera into the factory nav display. Both were very well put together and the instructions included were great. The ease of installation (plug-n-play) and no need to hack/cut/solder the factory harnesses is exactly what I was looking for. Highly recommended.

Mike

Troyz · 08-12-2013, 02:58 PM

The company is very quick to ship the merchandise as well. I am a happy customer.

ViciousZ34 · 07-24-2015, 02:31 PM

Anyone know where I can get one, they are out of stock

07-25-2013, 10:22 AM	#1 (permalink)
Troyz Base Member Join Date: Mar 2013 Location: Austin Posts: 154 Drives: 370Z Touring M6 Rep Power: 12	Ordered Switched Bypass Kit 2010+ I opted for the switch since its only wires and a relay and didn't have the complexity of a remote (which I could easily loose) or using external power for a receiver. Do I need to pry off the buttons on my radio to remove it? When routing the wires do I need to secure them with twist ties or anything?

07-25-2013, 05:20 PM	#5 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,886 Drives: '09 370 & ‘14 Juke Rep Power: 27409	Ok. My first question is, WTF are you talking about? Second is, why start a new thread on the same topic that you started before? Last edited by TreeSemdyZee; 07-25-2013 at 05:23 PM.

07-25-2013, 07:08 PM	#7 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	You can just interrupt the remote blue wire of the circuit bypass and add a switch. Other than that I have no idea what he is talking about. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

07-31-2013, 11:13 AM	#8 (permalink)
Troyz Base Member Join Date: Mar 2013 Location: Austin Posts: 154 Drives: 370Z Touring M6 Rep Power: 12	Bypass Kit (switch) - Car Kit Company I have a couple of questions. I am new at this. The instructions never mentioned disconnecting the battery. Should I do that? I don't want to deploy and air bag or something crazy. It became obvious from other threads removing the gear shift knob for an M6 is not easily done; I will work around that. Everything else looks straight forward except where to rout the wires to the switch itself by the cup holder. So I can take some pride and be able to remove this at anytime I am opting to do it myself. Is there anything I need to be careful about besides keeping track of a few dozen screws?

07-31-2013, 11:16 AM	#9 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	It never hurts to disconnect the battery when you're working with wiring. Troyz likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

07-25-2013, 02:44 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Amazon.com: 100 Black Nylon Cable Zip Ties Self Locking 2.5mm x 4": Arts, Crafts & Sewing

07-25-2013, 02:51 PM	#4 (permalink)
logenl7 Enthusiast Member Join Date: Sep 2012 Location: Marysville Ohio Age: 38 Posts: 357 Drives: 09 Nissan 370Z 6M Rep Power: 13	hahahahaha

07-25-2013, 05:45 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i think he's talking about the nav/dvd bypass circuit so he can run it while driving. he doesn't want the automatic one that has a built-in delay relay. he wants a mechanical spst sw, i think... not sure about the "prying off the buttons to remove it" part though...

07-31-2013, 11:44 AM	#10 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Ordered Switched Bypass Kit 2010+

07-31-2013, 12:37 PM	#11 (permalink)
Troyz Base Member Join Date: Mar 2013 Location: Austin Posts: 154 Drives: 370Z Touring M6 Rep Power: 12	Swapped to the Switch Version I swapped the remote kit for the switched version. Now that the threads are combined into a one you can see the gaps. I had little time to review my posts at work. The switched version of the Bypass Switch came with detailed colored instructions printed out.

08-05-2013, 10:11 AM	#12 (permalink)
Troyz Base Member Join Date: Mar 2013 Location: Austin Posts: 154 Drives: 370Z Touring M6 Rep Power: 12	Done I installed it myself. Not rocket science but you had to get everything off to get behind the Navigation Unit. The plug and play was idiot proof. Its very handy to have all the controls available when you drive esp the backup camera.

08-07-2013, 08:00 PM	#13 (permalink)
630Z Base Member Join Date: Jul 2013 Location: Shingle Springs, CA Posts: 1 Drives: 2010 370Z K23 M6 Rep Power: 12	Easy install I just finished up installing the switched override harness along with the harness to incorporate a camera into the factory nav display. Both were very well put together and the instructions included were great. The ease of installation (plug-n-play) and no need to hack/cut/solder the factory harnesses is exactly what I was looking for. Highly recommended. Mike Troyz likes this.

08-12-2013, 02:58 PM	#14 (permalink)
Troyz Base Member Join Date: Mar 2013 Location: Austin Posts: 154 Drives: 370Z Touring M6 Rep Power: 12	Bypass! The company is very quick to ship the merchandise as well. I am a happy customer.

07-24-2015, 02:31 PM	#15 (permalink)
ViciousZ34 Base Member Join Date: May 2015 Location: Kansas City Posts: 122 Drives: 11 Nissan 370z PL M6 Rep Power: 10	Out of Stock Anyone know where I can get one, they are out of stock

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown switched ignition fuse, where to look?	Alstann	Audio & Video	12	05-23-2013 03:39 PM
Switched from c230 to 370z	Rsdntevl	New Forum Member	15	02-01-2011 10:57 AM
Has Anyone Here Switched Over From a G37 to a 370?	LifeOfLaw	New Forum Member	8	11-15-2010 08:35 AM
Just switched to RP 5W 30 from ENEOS 0W50	Kastley85891	Engine & Drivetrain	11	06-04-2010 11:39 AM
Switched to MT90 today	m4a1mustang	Engine & Drivetrain	15	02-09-2010 04:56 AM