Caution with 2013 models and install

bigaudiofanat · 12-30-2013, 07:31 PM

Quote:

Originally Posted by 370_o

I just ran into the same problem as the OP with my Alpine head unit install this weekend. I had to rearrange the pins as previously suggested to make my Metra wire harness work. I'm not sure where that connector diagram previously posted came from but my vehicle side harness, and the service manual I was using, didn't have pin 18. Fair warning to all out there, Amazon is still selling bum connectors.

It's not amazon's fault bud, the pins are different in your Z than others. This needs to be addressed by metra not amazon.

370_o · 01-13-2014, 11:50 PM

Quote:

Originally Posted by bigaudiofanat

It's not amazon's fault bud, the pins are different in your Z than others. This needs to be addressed by metra not amazon.

I wasn't implying that it was Amazon's fault, merely that they're selling the harnesses that aren't specifically labeled or flagged for incompatibility with some 370z models.

Blu Z · 02-05-2014, 07:37 PM

Part of the way through installing a Kenwood into my 2014 base Z. Can someone confirm that this looks right as far as moving the pins around & getting the ASWC-1 wires in the correct place. I assume pin 8 isn't used? Also, for the people who have successfully moved these pins, what are you using the get them out of the harness? I've tried two eyeglass screwdrivers, multiple sewing needles, a paper clip; nothing seems to work.

370_o · 02-06-2014, 11:52 PM

Using a tiny screwdriver helps but it was mostly force that got mine out. One or two had bent retainers when they came out but you can carefully bend them back and they should be OK. The best way is a proprietary pin remover specific to that type of connector but I have no idea on the details for that. You could also get a second connector and cut it up for the pins.

1slow370 · 02-07-2014, 04:49 AM

if you look in the front of the connectorthere is a tiny rectangular slot above each wire make sure when you shove the paper clip in to the back to release the plastic tab that you can see the end of the paper clip in that slot then slide the wire and paper clip out together. that or take it to radio shack and get them to find you a depinner that fits

Blu Z · 02-07-2014, 05:39 PM

I have a friend whose dad is a dentist. He hooked me up with a couple dental instruments that were broken on one end & of no more use to him. Using those to poke at the holes in the connector & a healthy dose of brute force, the pins came out. Got everything hooked up last night, but the ASWC-1 was giving me fits. Came in after work this afternoon and finally got the steering wheel controls working after about 45 minutes of fiddling. Everything's working perfectly now!

bswoll · 02-08-2014, 12:16 AM

I tried with a paper clip today and it didn't work. I had a kit of sewing needles from a friend and took a needle that did fit and poked it in with a pair of pliers. Once in I was able to tug on the wire and the pin came out.

I have a 2013 base (got it in sept 2012) and the harness looks like the old 370z

02-05-2014, 07:37 PM	#33 (permalink)
Blu Z Base Member Join Date: Oct 2013 Location: Southeastern KY Posts: 54 Drives: '14 MB 6MT 370Z Rep Power: 12	Part of the way through installing a Kenwood into my 2014 base Z. Can someone confirm that this looks right as far as moving the pins around & getting the ASWC-1 wires in the correct place. I assume pin 8 isn't used? Also, for the people who have successfully moved these pins, what are you using the get them out of the harness? I've tried two eyeglass screwdrivers, multiple sewing needles, a paper clip; nothing seems to work. Killajabrizal likes this. __________________ 2014 MB 370Z 6MT sport - ordered 11/6/13 - delivered 1/27/14 --> Pics! WeatherTech floorliners / Kenwood DDX470 w/ Axxess ASWC-1 / GT-R start button / Aftermarket clutch helper spring / Escort Redline / Llumar CTX 30% Last edited by Blu Z; 02-09-2014 at 07:49 PM. Reason: update photo

02-07-2014, 04:49 AM	#35 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	if you look in the front of the connectorthere is a tiny rectangular slot above each wire make sure when you shove the paper clip in to the back to release the plastic tab that you can see the end of the paper clip in that slot then slide the wire and paper clip out together. that or take it to radio shack and get them to find you a depinner that fits __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

02-07-2014, 05:39 PM	#36 (permalink)
Blu Z Base Member Join Date: Oct 2013 Location: Southeastern KY Posts: 54 Drives: '14 MB 6MT 370Z Rep Power: 12	I have a friend whose dad is a dentist. He hooked me up with a couple dental instruments that were broken on one end & of no more use to him. Using those to poke at the holes in the connector & a healthy dose of brute force, the pins came out. Got everything hooked up last night, but the ASWC-1 was giving me fits. Came in after work this afternoon and finally got the steering wheel controls working after about 45 minutes of fiddling. Everything's working perfectly now! ZeroZeta likes this. __________________ 2014 MB 370Z 6MT sport - ordered 11/6/13 - delivered 1/27/14 --> Pics! WeatherTech floorliners / Kenwood DDX470 w/ Axxess ASWC-1 / GT-R start button / Aftermarket clutch helper spring / Escort Redline / Llumar CTX 30%

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Factory NAV Retrofit Install for Touring Models	scruffydog	Audio & Video	20	11-23-2015 07:16 AM
2013 models still being supplied?	ak8905	Nissan 370Z Pricing / Ordering Discussions	9	03-16-2013 01:13 AM
Did they change the muffler on 2013 models?	MrXistential	Intake/Exhaust	16	03-05-2013 10:00 AM
Word of Caution	Duncanz	Nissan 370Z General Discussions	79	07-06-2010 11:57 AM
Tsb: Various nissan models; i-key registration caution	AK370Z	370Z Technical Service Bulletins (TSB) / Recalls	0	02-08-2010 10:44 PM

02-06-2014, 11:52 PM	#34 (permalink)
370_o Base Member Join Date: Jul 2013 Location: Santa Monica, CA Posts: 51 Drives: 2013 370Z Sport M6 Rep Power: 15	Using a tiny screwdriver helps but it was mostly force that got mine out. One or two had bent retainers when they came out but you can carefully bend them back and they should be OK. The best way is a proprietary pin remover specific to that type of connector but I have no idea on the details for that. You could also get a second connector and cut it up for the pins.

02-08-2014, 12:16 AM	#37 (permalink)
bswoll Base Member Join Date: Sep 2012 Location: Los Angeles Posts: 21 Drives: 2013 370Z Silver 7AT Rep Power: 13	I tried with a paper clip today and it didn't work. I had a kit of sewing needles from a friend and took a needle that did fit and poked it in with a pair of pliers. Once in I was able to tug on the wire and the pin came out. I have a 2013 base (got it in sept 2012) and the harness looks like the old 370z