Originally Posted by 370_o I just ran into the same problem as the OP with my Alpine head unit install this weekend. I had to rearrange the pins as previously
|
|
LinkBack | Thread Tools | Display Modes |
12-30-2013, 07:31 PM | #31 (permalink) | |
Car Audio Installer
|
Quote:
__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ |
|
01-13-2014, 11:50 PM | #32 (permalink) |
Base Member
Join Date: Jul 2013
Location: Santa Monica, CA
Posts: 51
Drives: 2013 370Z Sport M6
Rep Power: 15 |
I wasn't implying that it was Amazon's fault, merely that they're selling the harnesses that aren't specifically labeled or flagged for incompatibility with some 370z models.
|
02-05-2014, 07:37 PM | #33 (permalink) |
Base Member
Join Date: Oct 2013
Location: Southeastern KY
Posts: 54
Drives: '14 MB 6MT 370Z
Rep Power: 12 |
Part of the way through installing a Kenwood into my 2014 base Z. Can someone confirm that this looks right as far as moving the pins around & getting the ASWC-1 wires in the correct place. I assume pin 8 isn't used? Also, for the people who have successfully moved these pins, what are you using the get them out of the harness? I've tried two eyeglass screwdrivers, multiple sewing needles, a paper clip; nothing seems to work.
__________________
2014 MB 370Z 6MT sport - ordered 11/6/13 - delivered 1/27/14 --> Pics! WeatherTech floorliners / Kenwood DDX470 w/ Axxess ASWC-1 / GT-R start button / Aftermarket clutch helper spring / Escort Redline / Llumar CTX 30% Last edited by Blu Z; 02-09-2014 at 07:49 PM. Reason: update photo |
02-06-2014, 11:52 PM | #34 (permalink) |
Base Member
Join Date: Jul 2013
Location: Santa Monica, CA
Posts: 51
Drives: 2013 370Z Sport M6
Rep Power: 15 |
Using a tiny screwdriver helps but it was mostly force that got mine out. One or two had bent retainers when they came out but you can carefully bend them back and they should be OK. The best way is a proprietary pin remover specific to that type of connector but I have no idea on the details for that. You could also get a second connector and cut it up for the pins.
|
02-07-2014, 04:49 AM | #35 (permalink) |
A True Z Fanatic
Join Date: Aug 2009
Location: In the D
Posts: 3,732
Drives: v8 74 260z ;)
Rep Power: 7251 |
if you look in the front of the connectorthere is a tiny rectangular slot above each wire make sure when you shove the paper clip in to the back to release the plastic tab that you can see the end of the paper clip in that slot then slide the wire and paper clip out together. that or take it to radio shack and get them to find you a depinner that fits
__________________
ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 |
02-07-2014, 05:39 PM | #36 (permalink) |
Base Member
Join Date: Oct 2013
Location: Southeastern KY
Posts: 54
Drives: '14 MB 6MT 370Z
Rep Power: 12 |
I have a friend whose dad is a dentist. He hooked me up with a couple dental instruments that were broken on one end & of no more use to him. Using those to poke at the holes in the connector & a healthy dose of brute force, the pins came out. Got everything hooked up last night, but the ASWC-1 was giving me fits. Came in after work this afternoon and finally got the steering wheel controls working after about 45 minutes of fiddling. Everything's working perfectly now!
__________________
2014 MB 370Z 6MT sport - ordered 11/6/13 - delivered 1/27/14 --> Pics! WeatherTech floorliners / Kenwood DDX470 w/ Axxess ASWC-1 / GT-R start button / Aftermarket clutch helper spring / Escort Redline / Llumar CTX 30% |
02-08-2014, 12:16 AM | #37 (permalink) |
Base Member
Join Date: Sep 2012
Location: Los Angeles
Posts: 21
Drives: 2013 370Z Silver 7AT
Rep Power: 13 |
I tried with a paper clip today and it didn't work. I had a kit of sewing needles from a friend and took a needle that did fit and poked it in with a pair of pliers. Once in I was able to tug on the wire and the pin came out.
I have a 2013 base (got it in sept 2012) and the harness looks like the old 370z |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Factory NAV Retrofit Install for Touring Models | scruffydog | Audio & Video | 20 | 11-23-2015 07:16 AM |
2013 models still being supplied? | ak8905 | Nissan 370Z Pricing / Ordering Discussions | 9 | 03-16-2013 01:13 AM |
Did they change the muffler on 2013 models? | MrXistential | Intake/Exhaust | 16 | 03-05-2013 10:00 AM |
Word of Caution | Duncanz | Nissan 370Z General Discussions | 79 | 07-06-2010 11:57 AM |
Tsb: Various nissan models; i-key registration caution | AK370Z | 370Z Technical Service Bulletins (TSB) / Recalls | 0 | 02-08-2010 10:44 PM |