|
On weekend #1 installed a Kenwood DNX 9140 HU with the first remote wire off the scosche harness ran to both the attenna adapter and the axxess steering wheel controls.
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
05-23-2013, 09:57 AM
|
#1 (permalink) |
|
Base Member
Join Date: Apr 2013
Location: jacksonville
Posts: 2
Drives: 2010 370z sport
Rep Power: 12  |
Antenna stopped working with Kenwood HU
On weekend #1 installed a Kenwood DNX 9140 HU with the first remote wire off the scosche harness ran to both the attenna adapter and the axxess steering wheel controls.
The attenna worked fine for a week, radio was crystal clear. On weekend #2 I installed the amp, using the second remote wire (which was run to the back during the headunit install on weekend #1). The amp works as expected, and turns on and off with the headunit. The antenna, on the other hand, no longer works. The axess steering wheel controls also work fine. Is there a fuse for the antenna? Or is more than likely the remote/antenna power wire connection (which was soldered)? I am hoping there is something somewhere that can be fixed without having to go back into the dash behind the radio. Thanks Mike |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| S-Mode stopped working for a while??? | red6spd | Nissan 370Z General Discussions | 28 | 07-02-2018 12:37 PM |
| Key Fob stopped working, even after new battery.... | wheee! | Exterior & Interior | 16 | 02-18-2018 07:01 AM |
| Bose Subwoofer stopped working!!!! | Jimmyusmc | Nissan 370Z General Discussions | 1 | 08-07-2012 12:48 AM |
| My A/C stopped working.... | Dreamin'Z | Exterior & Interior | 3 | 05-08-2009 11:52 AM |
| I've only used it for 300 miles and it stopped working!! | kevr6 | Nissan 370Z General Discussions | 13 | 03-19-2009 01:18 AM |
Threaded Mode
