Antenna stopped working with Kenwood HU

nicmet1 · 05-23-2013, 10:57 AM

On weekend #1 installed a Kenwood DNX 9140 HU with the first remote wire off the scosche harness ran to both the attenna adapter and the axxess steering wheel controls.

The attenna worked fine for a week, radio was crystal clear.

On weekend #2 I installed the amp, using the second remote wire (which was run to the back during the headunit install on weekend #1). The amp works as expected, and turns on and off with the headunit.

The antenna, on the other hand, no longer works.

The axess steering wheel controls also work fine.

Is there a fuse for the antenna? Or is more than likely the remote/antenna power wire connection (which was soldered)?

I am hoping there is something somewhere that can be fixed without having to go back into the dash behind the radio.

Thanks
Mike

kenchan · 05-23-2013, 11:32 AM

i dont remember if the antenna booster had its own fuse or not. check the fuse box behind the kick panel driver side.

Cbtech · 05-23-2013, 01:46 PM

Quote:

Originally Posted by nicmet1

On weekend #1 installed a Kenwood DNX 9140 HU with the first remote wire off the scosche harness ran to both the attenna adapter and the axxess steering wheel controls.

The attenna worked fine for a week, radio was crystal clear.

On weekend #2 I installed the amp, using the second remote wire (which was run to the back during the headunit install on weekend #1). The amp works as expected, and turns on and off with the headunit.

The antenna, on the other hand, no longer works.

The axess steering wheel controls also work fine.

Is there a fuse for the antenna? Or is more than likely the remote/antenna power wire connection (which was soldered)?

I am hoping there is something somewhere that can be fixed without having to go back into the dash behind the radio.

Thanks
Mike

ur gonna have to open up the dash again to troubleshoot. the adapter doesn't have a fuse but im betting since you soldered the connection that the antenna connection to the stereo wiggled out. betcha too much Fast and Furious

05-23-2013, 10:57 AM	#1 (permalink)
nicmet1 Base Member Join Date: Apr 2013 Location: jacksonville Posts: 2 Drives: 2010 370z sport Rep Power: 12	Antenna stopped working with Kenwood HU On weekend #1 installed a Kenwood DNX 9140 HU with the first remote wire off the scosche harness ran to both the attenna adapter and the axxess steering wheel controls. The attenna worked fine for a week, radio was crystal clear. On weekend #2 I installed the amp, using the second remote wire (which was run to the back during the headunit install on weekend #1). The amp works as expected, and turns on and off with the headunit. The antenna, on the other hand, no longer works. The axess steering wheel controls also work fine. Is there a fuse for the antenna? Or is more than likely the remote/antenna power wire connection (which was soldered)? I am hoping there is something somewhere that can be fixed without having to go back into the dash behind the radio. Thanks Mike

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
S-Mode stopped working for a while???	red6spd	Nissan 370Z General Discussions	28	07-02-2018 01:37 PM
Key Fob stopped working, even after new battery....	wheee!	Exterior & Interior	16	02-18-2018 08:01 AM
Bose Subwoofer stopped working!!!!	Jimmyusmc	Nissan 370Z General Discussions	1	08-07-2012 01:48 AM
My A/C stopped working....	Dreamin'Z	Exterior & Interior	3	05-08-2009 12:52 PM
I've only used it for 300 miles and it stopped working!!	kevr6	Nissan 370Z General Discussions	13	03-19-2009 02:18 AM

05-23-2013, 11:32 AM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i dont remember if the antenna booster had its own fuse or not. check the fuse box behind the kick panel driver side.