<3 my new HU

Pintsize725 · 04-03-2013, 02:29 PM

Quote:

Originally Posted by LostSol

OK cool thanks for the ideas guys, hoping the HU is here by friday so I can do the install over the weekend, maybe I can take a bunch of pics and make an updated DIY

Call me for a mat quote! 1-855-GTSOUND

LostSol · 04-03-2013, 02:33 PM

Quote:

Originally Posted by Pintsize725

Call me for a mat quote! 1-855-GTSOUND

When I get around to that I definitely will, but for now I dont feel like I need it

kenchan · 04-03-2013, 02:45 PM

one thing i STRONGLY recommend is when you pull-up the shifter ring (first step), place a thick towel under it so you dont scratch the center console when you place it down.

not that i scratched mine, but i see a lot of folks with scratched center consoles.

like this:

LostSol · 04-03-2013, 02:57 PM

ill just pull off my shift knob and set the whole assembly aside

kenchan · 04-03-2013, 03:02 PM

Quote:

Originally Posted by LostSol

ill just pull off my shift knob and set the whole assembly aside

yah, might want to read about the shift knob removal thread... you might get lucky, but mine was a royal pita to remove. broke 2 strap wrenches.

LostSol · 04-03-2013, 03:08 PM

LOL i have an aftermarket knob already, and I did destroy my stock knob in the process, but my new knob is easy off.

kenchan · 04-03-2013, 03:31 PM

haha, yah, me too.

anyway, the stereo install is easy to do with the shifter ring still attached too.

pL4tiNumfi5t · 04-03-2013, 06:42 PM

Looking good OP

I picked up the AVH-X3500BHS a few weeks back.
Does anyone know if radio preset seeking steering wheel control (w/PAC SWI-RC) works with these 2013 line of Pioneer HUs? I know there is a limitation listed on the PAC website, just wondering if it still applies. The way I have it setup now I can only manually go through the band in .2 increments.

"Pioneer AVIC-Fxxx radios do not interpret radio preset seeking commands. This is a limitation of the radio not the SWI-RC. There is no correction for this unless it comes from Pioneer. "

JENZ · 04-03-2013, 08:49 PM

Here is the pic of the BT

kenchan · 04-04-2013, 01:10 PM

looks good, jenz.

i saw a couple other people placing their mic there. originally i was going to place mine there too, but i decided to place it near the rear view mirror as i could tuck the clip into the ceiling liner more cleanly.

Quote:

Originally Posted by pL4tiNumfi5t

Looking good OP

I picked up the AVH-X3500BHS a few weeks back.
Does anyone know if radio preset seeking steering wheel control (w/PAC SWI-RC) works with these 2013 line of Pioneer HUs? I know there is a limitation listed on the PAC website, just wondering if it still applies. The way I have it setup now I can only manually go through the band in .2 increments.

"Pioneer AVIC-Fxxx radios do not interpret radio preset seeking commands. This is a limitation of the radio not the SWI-RC. There is no correction for this unless it comes from Pioneer. "

im using a 4yr old peripheral (pac) on my 4500BT and for FM radio, i do need to select the presents on the display to scroll. other then that, everything works. i dont really listen to the radio so this is no issue for me.

i will be installing a 2500BT in the next week or so using a ASWC in my dd. will post back how that works. its on my honda, but it has the same steering wheel controls as my base Z.

kenchan · 04-04-2013, 01:25 PM

if pioneer does a firm ware update on these units, i hope they also add some feature to turn the clock off. my 3100, 4100 both worked fine with pac (all functions including FM scroll by preset) and allowed the clock turn off.

Cbtech · 04-04-2013, 02:14 PM

Quote:

Originally Posted by kenchan

looks good, jenz.

i will be installing a 2500BT in the next week or so using a ASWC in my dd. will post back how that works. its on my honda, but it has the same steering wheel controls as my base Z.

I cannot get this thing to work for the life of me...I got the 4500 and nothing works

kenchan · 04-04-2013, 02:25 PM

Quote:

Originally Posted by Cbtech

I cannot get this thing to work for the life of me...I got the 4500 and nothing works

wont even turn on?

can you push the reset button?

JENZ · 04-04-2013, 02:43 PM

At first the location of the BT felt weird.... I am short and sit so close up that it almost felt as though it was right in my face... But now it's ok.

Cbtech · 04-04-2013, 02:45 PM

Quote:

Originally Posted by kenchan

wont even turn on?

can you push the reset button?

no it turns on and blinks. followed the instructions to press the volume button up and it reacts but then nothing else.

no light blink nothing

04-03-2013, 02:57 PM	#34 (permalink)
LostSol Premium Member Join Date: Jan 2013 Location: Orlando Posts: 1,021 Drives: 2010 370z 40th A.E. Rep Power: 15	ill just pull off my shift knob and set the whole assembly aside __________________ 2010 Nissan 370Z 40th Anniversary Edition #762/1000 \| Forgestar \| Michelin \| Swift \| TRS \| Z Speed \| ARK \| Z1 \| Hawk \| CFE \| Evo-R \| GTMat \| Stillen \| Seibon \| Whiteline \| Pioneer \|

04-03-2013, 03:08 PM	#36 (permalink)
LostSol Premium Member Join Date: Jan 2013 Location: Orlando Posts: 1,021 Drives: 2010 370z 40th A.E. Rep Power: 15	LOL i have an aftermarket knob already, and I did destroy my stock knob in the process, but my new knob is easy off. kenchan likes this. __________________ 2010 Nissan 370Z 40th Anniversary Edition #762/1000 \| Forgestar \| Michelin \| Swift \| TRS \| Z Speed \| ARK \| Z1 \| Hawk \| CFE \| Evo-R \| GTMat \| Stillen \| Seibon \| Whiteline \| Pioneer \|

04-03-2013, 06:42 PM	#38 (permalink)
pL4tiNumfi5t Base Member Join Date: Nov 2010 Location: 520, AZ Posts: 120 Drives: 2020 Tacoma TRD Pro Rep Power: 14	Looking good OP I picked up the AVH-X3500BHS a few weeks back. Does anyone know if radio preset seeking steering wheel control (w/PAC SWI-RC) works with these 2013 line of Pioneer HUs? I know there is a limitation listed on the PAC website, just wondering if it still applies. The way I have it setup now I can only manually go through the band in .2 increments. "Pioneer AVIC-Fxxx radios do not interpret radio preset seeking commands. This is a limitation of the radio not the SWI-RC. There is no correction for this unless it comes from Pioneer. " JENZ likes this. __________________ Tanabe Medalion Touring w/Y-Pipe \| Berk HFCs \| Mishimoto Air Intake Kit \| aFe Pro Dry S Drop-ins \| EcuTek \| Z1 34R Oil Cooler \| RS-R Ti2000 \| KONI Yellow \| SPL \| Goodridge Phantom \| Kics \| GTMat \| WedsSport SA-55M \| Bridgestone S-04 DIY: 7AT Aux Power Outlet Relocate

04-04-2013, 02:43 PM	#44 (permalink)
JENZ A True Z Fanatic Join Date: Mar 2013 Location: Las Vegas Posts: 1,356 Drives: 2016 Mazda MX-5 Club Rep Power: 20	At first the location of the BT felt weird.... I am short and sit so close up that it almost felt as though it was right in my face... But now it's ok. __________________ IG: @dawdlingcupcake

04-03-2013, 02:45 PM	#33 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	one thing i STRONGLY recommend is when you pull-up the shifter ring (first step), place a thick towel under it so you dont scratch the center console when you place it down. not that i scratched mine, but i see a lot of folks with scratched center consoles. like this:

04-03-2013, 03:31 PM	#37 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	haha, yah, me too. anyway, the stereo install is easy to do with the shifter ring still attached too.

04-04-2013, 01:25 PM	#41 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	if pioneer does a firm ware update on these units, i hope they also add some feature to turn the clock off. my 3100, 4100 both worked fine with pac (all functions including FM scroll by preset) and allowed the clock turn off.