Full iPad mini integration, need advice

cheshirecat · 03-22-2013, 08:05 AM

Quote:

Originally Posted by bigaudiofanat

BT compression is much higher than just pumping in amplified music through a AUX port. Hence how an AUX input can sound better than BT streaming.

It's true that BT has a max bandwidth of 768kb. Uncompressed CD-quality music is approx 1.4mb.

I still contend that the quality of the connection (and hardware) along with the codec used by the BT connection as a result of that hardware plays a large part in the quality of the sound.

I personally wish the BT standard would be updated so that it would allow a higher bandwidth to the point of actually being able to stream "uncompressed" CD quality music (since CD music is compressed anyway).

Cbtech · 03-22-2013, 01:50 PM

Quote:

Originally Posted by cheshirecat

It's true that BT has a max bandwidth of 768kb. Uncompressed CD-quality music is approx 1.4mb.

I still contend that the quality of the connection (and hardware) along with the codec used by the BT connection as a result of that hardware plays a large part in the quality of the sound.

I personally wish the BT standard would be updated so that it would allow a higher bandwidth to the point of actually being able to stream "uncompressed" CD quality music (since CD music is compressed anyway).

From what i understand Bluetooth has a transferable connection of up to 1.25MB per second.

The industry has eased up on more BT technology and hasn't come up with something new within the last 2 years. But the point here is unless you are a fanatical audio enthusiast you are not going to get concert quality sound out of a vehicle. at bit rate of 512 or more your going to have a high quality sound without noticing the difference IMO.

cheshirecat · 03-22-2013, 02:51 PM

Quote:

Originally Posted by Cbtech

From what i understand Bluetooth has a transferable connection of up to 1.25MB per second.
The industry has eased up on more BT technology and hasn't come up with something new within the last 2 years. But the point here is unless you are a fanatical audio enthusiast you are not going to get concert quality sound out of a vehicle. at bit rate of 512 or more your going to have a high quality sound without noticing the difference IMO.

I'm not an audio savant like some of the dudes like Bigaudio are. The transfer limit I think has to do more with the individual BT protocol (a2dp) that is used for the wireless transfer, which is the one I quoted that's a little north of 720kbps. I dunno.

From there, you're limited by the codec which can be as low as 200kbps. Some apps and some adapters cannot stream at the highest native BT codec rate which is still kinda low.

Here's some info about it. I'm not sure how current it is. I'd personally really like to see the native mp3 BT codec actually be put into play. I think sound quality could improve quite a bit from it.

Bluetooth audio quality (A2DP) - News - SoundExpert

bigaudiofanat · 03-22-2013, 06:12 PM

Quote:

Originally Posted by Cbtech

From what i understand Bluetooth has a transferable connection of up to 1.25MB per second.

The industry has eased up on more BT technology and hasn't come up with something new within the last 2 years. But the point here is unless you are a fanatical audio enthusiast you are not going to get concert quality sound out of a vehicle. at bit rate of 512 or more your going to have a high quality sound without noticing the difference IMO.

Most BT streaming is not even close to what the max throughput is. It's like SATA 6.0 MB Throughput for hard drives, you will never see that speed. Another example is MAX power for an amp, you just will not ever see that. Most streaming in today's cars is not using the newest tech even, so your compression is much higher than the numbers would suggest. Given that I have streamed BT audio through many different head units I can certainly hear the compression even with newer head units, and that's using factory speakers even.

peleincubus · 03-29-2013, 09:49 AM

Would love to see some pictures of this.

Glambutang · 06-18-2013, 10:42 PM

So finally started the project here are some pictures so far:

snowsurfdirtx · 06-19-2013, 02:05 AM

moar pics! looks like its going to turn out sweet..

Glambutang · 06-23-2013, 03:30 AM

Almost there

peleincubus · 06-23-2013, 02:32 PM

Why did you remove the digitizer?

DeEePiDDy · 06-23-2013, 02:50 PM

How about a pic where you can actually see what your dash looks like? It's all blacked out without any light!

cheshirecat · 06-23-2013, 03:27 PM

Not bad- post some more pics with at least the interior light on. Let's see the enclosure.

Glambutang · 06-23-2013, 03:53 PM

Quote:

Originally Posted by peleincubus

Why did you remove the digitizer?

Because the way ipads are made, the digitizer and lcd are two separate pieces unlike lets say iphone 5, so i glued the digitizer to lcd with OCA to make it more durable and make lcd brighter on sunlight. Then i stripped the ipad all apart leaving unnecessary parts behind, like the metal housing just takes up space, power button no need for that, speakers didnt install those. While screen is vertical, i placed motherboard horizontally to make space readings more correct. I still have to run face camera behind the steering wheel, and rear camera to the rearview mirror, so i can record stuff while driving. Then almost done with running home button to the accessory key by cup holder.

Glambutang · 06-23-2013, 03:55 PM

Quote:

Originally Posted by DeEePiDDy

How about a pic where you can actually see what your dash looks like? It's all blacked out without any light!

I finished it all last night, i wrapped the bezel in permission color orange leather, but this morning in a daylight it didnt look that good so i picked up black suede and in a process of making a new frame as im typing, more good pictures coming really soon

Glambutang · 06-23-2013, 04:01 PM

Oh and also the headunit is giving me problems since it does not provide enough power to charge the ipad, and doesnt have bluetooth in it or aux lol so i have to buy a new one now or if someone wants to trade its Appradio 2.

peleincubus · 06-23-2013, 05:06 PM

Quote:

Originally Posted by Glambutang

Because the way ipads are made, the digitizer and lcd are two separate pieces unlike lets say iphone 5, so i glued the digitizer to lcd with OCA to make it more durable and make lcd brighter on sunlight. Then i stripped the ipad all apart leaving unnecessary parts behind, like the metal housing just takes up space, power button no need for that, speakers didnt install those. While screen is vertical, i placed motherboard horizontally to make space readings more correct. I still have to run face camera behind the steering wheel, and rear camera to the rearview mirror, so i can record stuff while driving. Then almost done with running home button to the accessory key by cup holder.

I watched a YouTube video of a guy taking one apart. But all of what you did is way over my head. Great job don't think I would have the courage to do it myself though haha

06-23-2013, 02:50 PM	#25 (permalink)
DeEePiDDy Track Member Join Date: Jul 2010 Location: Horsham, PA Posts: 548 Drives: 09 Nissan 370z CY MT Rep Power: 16	How about a pic where you can actually see what your dash looks like? It's all blacked out without any light! __________________ 2009 Nissan 370Z Chicane Yellow Base Manual Transmission

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cubby Tablet (iPad Mini)	Bandit_Kaine	Exterior & Interior	31	09-04-2013 01:30 AM
iPad mini already installed in a car dash	Thechidz	Audio & Video	5	11-02-2012 10:36 PM
iPad Mini Potential	bigdog1250	Exterior & Interior	58	11-02-2012 01:11 PM
Custom iPad install with full tilt swivel	labk888	Audio & Video	9	05-27-2010 09:02 PM

03-29-2013, 09:49 AM	#20 (permalink)
peleincubus Enthusiast Member Join Date: Jan 2012 Location: Austin, tx Posts: 255 Drives: PW 14' 370Z Rep Power: 13	Would love to see some pictures of this.

06-18-2013, 10:42 PM	#21 (permalink)
Glambutang Base Member Join Date: Dec 2012 Location: New York Posts: 86 Drives: Honda, im a ricer Rep Power: 13	So finally started the project here are some pictures so far:

06-19-2013, 02:05 AM	#22 (permalink)
snowsurfdirtx Enthusiast Member Join Date: Sep 2012 Location: WA Posts: 285 Drives: Too Fast Rep Power: 13	moar pics! looks like its going to turn out sweet..

06-23-2013, 03:30 AM	#23 (permalink)
Glambutang Base Member Join Date: Dec 2012 Location: New York Posts: 86 Drives: Honda, im a ricer Rep Power: 13	Almost there

06-23-2013, 02:32 PM	#24 (permalink)
peleincubus Enthusiast Member Join Date: Jan 2012 Location: Austin, tx Posts: 255 Drives: PW 14' 370Z Rep Power: 13	Why did you remove the digitizer?

06-23-2013, 03:27 PM	#26 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 293	Not bad- post some more pics with at least the interior light on. Let's see the enclosure.

06-23-2013, 04:01 PM	#29 (permalink)
Glambutang Base Member Join Date: Dec 2012 Location: New York Posts: 86 Drives: Honda, im a ricer Rep Power: 13	Oh and also the headunit is giving me problems since it does not provide enough power to charge the ipad, and doesnt have bluetooth in it or aux lol so i have to buy a new one now or if someone wants to trade its Appradio 2.