GoPro Hero 3 Black Edition, w/ Remote Mount Microphone

MightyBobo · 02-23-2013, 05:36 PM

Got tired of the muffled sound with the GoPro, and decided to go with a remote mic setup that m4a1mustang came up with. Nothing fancy.

Hardware:

GoPro Hero 3 Black
Audio-Technica PRO24-CM Microphone
16' male-to-female audio cable
Fat Gecko "Mini" camera mount (with suction cup)
GoPro's USB-to-Female audio cable

Here's my one (and only, so far) test video I quickly made today, in the miserable cold and wet weather.

IMWEZL · 02-23-2013, 08:05 PM

Sounds good. You get to hear the car and road minus wind noise.

What settings do you have your hero3 at?

MightyBobo · 02-23-2013, 08:19 PM

Quote:

Originally Posted by IMWEZL

Sounds good. You get to hear the car and road minus wind noise.

What settings do you have your hero3 at?

I just had it set to 1080 at 24 FPS, nothing exciting.

Sent from my Galaxy S3

TerribleONE · 02-23-2013, 08:32 PM

sounds amazing man.. I am gonna have to do the same definitely.

SS_Firehawk · 02-23-2013, 09:39 PM

I was planning to do the same when I got home lol

daisuke149 · 02-26-2013, 09:59 PM

thats the exact same setup i have lolol actually.

daisuke149 · 02-26-2013, 09:59 PM

where did you mount your Microphone btw?

im planning on mounting mine rear bumper just above/between the exhausts. keep it outta the wind.

MightyBobo · 02-26-2013, 10:15 PM

Quote:

Originally Posted by daisuke149

where did you mount your Microphone btw?

im planning on mounting mine rear bumper just above/between the exhausts. keep it outta the wind.

Halfway in between the exhausts wasnt a good location for me. There wasnt enough meat to use my suction cup mount there. I ended up putting it directly above one of my pipes, and I'm happy with that location. It'd be nice to get that stereo effect I suppose, but I reasoned that the sound would likely be almost identical lol.

daisuke149 · 02-26-2013, 10:17 PM

Quote:

Originally Posted by MightyBobo

Halfway in between the exhausts wasnt a good location for me. There wasnt enough meat to use my suction cup mount there. I ended up putting it directly above one of my pipes, and I'm happy with that location. It'd be nice to get that stereo effect I suppose, but I reasoned that the sound would likely be almost identical lol.

LOLOL damnit thats the exact reason i havnt actually done it yet. there isnt enough of a flat area for the suction cup to mount there.

im thinking of doing a lil bracket that bolts up to where the license plate goes. So the plate would still be showing 100%.

MightyBobo · 02-27-2013, 01:31 AM

Quote:

Originally Posted by daisuke149

LOLOL damnit thats the exact reason i havnt actually done it yet. there isnt enough of a flat area for the suction cup to mount there.

im thinking of doing a lil bracket that bolts up to where the license plate goes. So the plate would still be showing 100%.

Or just KISS and mount it where I did lol

Sent from my Galaxy S3

Grindkiezer · 02-27-2013, 01:37 AM

I mount my go pro mount to the fog light area, I'm not sure if that's the area that you were talking about but if it is there's just enough room for a suction cup mount on top of it

MightyBobo · 02-27-2013, 01:39 AM

Quote:

Originally Posted by Grindkiezer

I mount my go pro mount to the fog light area, I'm not sure if that's the area that you were talking about but if it is there's just enough room for a suction cup mount on top of it

The problem is mounting it so the Mic isn't hitting wind though. That area is a bit low, and may pick up wind noise.

Sent from my Galaxy S3

kenchan · 02-27-2013, 10:38 AM

do they sell special cable for allowing simultaneous power and mic input for hero3?

from wat i saw a few months ago, it's either power or mic. my hero2 is mounted inside my car 100% of the time, so i need power and mic input.

MightyBobo · 02-27-2013, 10:44 AM

Quote:

Originally Posted by kenchan

do they sell special cable for allowing simultaneous power and mic input for hero3?

from wat i saw a few months ago, it's either power or mic. my hero2 is mounted inside my car 100% of the time, so i need power and mic input.

Uhhhh, It's likely one or the other. GoPro's own cable is only a single Mini USB to Female connector, with nothing branching off.

How would you intend to power the GoPro AND feed it an audio feed?

Actually, better yet...how are you feeding power to your GoPro in the car?

daisuke149 · 02-27-2013, 10:47 AM

Quote:

Originally Posted by MightyBobo

Uhhhh, It's likely one or the other. GoPro's own cable is only a single Mini USB to Female connector, with nothing branching off.

How would you intend to power the GoPro AND feed it an audio feed?

Actually, better yet...how are you feeding power to your GoPro in the car?

yeah go pro messed up a bit on the design with that. Might need the extended battery and power that while using audio mic.

but thats wht im gonna work on a bracket for the license plate. It seems to be the best area to void noise and central to both exhausts.

i actually looking into a system with multiple wireless mics that feeds into a single source to feed into go pro.

this is so i can get the side exit exhausts too, but need a way to avoid wind noise.

02-23-2013, 05:36 PM	#1 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 52	GoPro Hero 3 Black Edition, w/ Remote Mount Microphone Got tired of the muffled sound with the GoPro, and decided to go with a remote mic setup that m4a1mustang came up with. Nothing fancy. Hardware: GoPro Hero 3 Black Audio-Technica PRO24-CM Microphone 16' male-to-female audio cable Fat Gecko "Mini" camera mount (with suction cup) GoPro's USB-to-Female audio cable Here's my one (and only, so far) test video I quickly made today, in the miserable cold and wet weather. The1michael likes this. __________________ I don't own a car anymore.

02-23-2013, 08:32 PM	#4 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	sounds amazing man.. I am gonna have to do the same definitely. __________________ 638WHP 541WTQ @ 13.5PSI Build thread

02-23-2013, 09:39 PM	#5 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	I was planning to do the same when I got home lol __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

02-27-2013, 01:37 AM	#11 (permalink)
Grindkiezer Track Member Join Date: Sep 2012 Location: San Diego Posts: 824 Drives: A Car Rep Power: 14	I mount my go pro mount to the fog light area, I'm not sure if that's the area that you were talking about but if it is there's just enough room for a suction cup mount on top of it __________________ Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TAKE A RIDE 3.0 MY 3rd video but with the GoPro Hero 2	xnismo370zx	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	10-16-2012 08:26 PM
GoPro HD Hero 960	bjblackout	Misc Items for sale (No Z stuff)	13	05-31-2012 06:34 AM
GoPro Hero HD & Accessories For Sale	Cmike2780	Misc Items for sale (No Z stuff)	20	03-22-2012 08:36 PM
GoPro Hero Camera	CraigP	Audio & Video	5	08-06-2011 12:06 AM
GoPro Hero Camera	nextbesthing	The Lounge (Off Topic)	2	02-05-2010 02:14 PM

02-23-2013, 08:05 PM	#2 (permalink)
IMWEZL Track Member Join Date: Apr 2009 Location: HNL Posts: 603 Drives: 370Z/MKVII GTI Rep Power: 17	Sounds good. You get to hear the car and road minus wind noise. What settings do you have your hero3 at?

02-26-2013, 09:59 PM	#6 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	thats the exact same setup i have lolol actually.

02-26-2013, 09:59 PM	#7 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	where did you mount your Microphone btw? im planning on mounting mine rear bumper just above/between the exhausts. keep it outta the wind.

02-27-2013, 10:38 AM	#13 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	do they sell special cable for allowing simultaneous power and mic input for hero3? from wat i saw a few months ago, it's either power or mic. my hero2 is mounted inside my car 100% of the time, so i need power and mic input.