[How To] Hardwire Radar Detector w/$2 Mount

Cbtech · 02-23-2013, 02:39 AM

Hey ya'll I'm new to this forum but not new to the Z scene and doing my own Modding. I know this has probably been beaten to death but I thought i would contribute to the plethora of how to hard-wire a radar detector. I used the search button and couldn't find anything like this, so here goes.

First ill start off with the home made radar mount. Why spend $60 Dollars when you can do this for less than $5. I saw this idea on a forum a while back and I thought that it was ingenious! The whole set up cost less than $5.
reflector.jpg

I actually went to a bike shop and got 2 for $2 I also asked them for an old tube. I then went to Lowes and got a pack of 3/8th inch nut and bolts and a tube of loctite.
20130218_211959.jpg

The ring of the reflector is a little to big for the post of the mirror so this is where the old tire tube came into play. I cut a piece of the tube to the same size as the ring. I had to cut 2 rings of tube in order to fit the mirror post. I also used double sided tape to keep the tube in the ring (makes it easier for mounting)...also the key is the tube is kinda fuzzy on the inside so you want to turn it inside out.
tube_ring.jpg
I used a metal drill bit and drilled a center hole into the Escort mount
drill_mount.jpg underbolt.jpg
top_bolt.jpg

Now you want to attach the ring around the mirror post first. The inner tire tube grips the mirror post and a nice snug fit. After its nice and tight (and straight) you will then bolt on the second nut and hinge shown below
bolt_on.jpg
make sure to put your detector on the mount and adjust to your preference. I have the Escort 9500i which has quite a few buttons on the top so i chose mine to have a bigger gap between the mirror and the detector.
mounted.jpg

02-23-2013, 02:39 AM	#1 (permalink)
Cbtech A True Z Fanatic Join Date: Feb 2013 Location: Sacramento, CA Posts: 1,372 Drives: 40th Anniversary Rep Power: 16	[How To] Hardwire Radar Detector w/$2 Mount Hey ya'll I'm new to this forum but not new to the Z scene and doing my own Modding. I know this has probably been beaten to death but I thought i would contribute to the plethora of how to hard-wire a radar detector. I used the search button and couldn't find anything like this, so here goes. First ill start off with the home made radar mount. Why spend $60 Dollars when you can do this for less than $5. I saw this idea on a forum a while back and I thought that it was ingenious! The whole set up cost less than $5. reflector.jpg I actually went to a bike shop and got 2 for $2 I also asked them for an old tube. I then went to Lowes and got a pack of 3/8th inch nut and bolts and a tube of loctite. 20130218_211959.jpg The ring of the reflector is a little to big for the post of the mirror so this is where the old tire tube came into play. I cut a piece of the tube to the same size as the ring. I had to cut 2 rings of tube in order to fit the mirror post. I also used double sided tape to keep the tube in the ring (makes it easier for mounting)...also the key is the tube is kinda fuzzy on the inside so you want to turn it inside out. tube_ring.jpg I used a metal drill bit and drilled a center hole into the Escort mount drill_mount.jpg underbolt.jpg top_bolt.jpg Now you want to attach the ring around the mirror post first. The inner tire tube grips the mirror post and a nice snug fit. After its nice and tight (and straight) you will then bolt on the second nut and hinge shown below bolt_on.jpg make sure to put your detector on the mount and adjust to your preference. I have the Escort 9500i which has quite a few buttons on the top so i chose mine to have a bigger gap between the mirror and the detector. mounted.jpg kenchan, kidkotic2001, gr8-wrx and 3 others like this. Last edited by Cbtech; 07-28-2014 at 05:51 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hardwire BOTH radar detector AND dashcam to mirror?	Stuberty	Exterior & Interior	12	07-14-2015 07:39 AM
DIY: Blinder installation and radar detector hardwire	semtex	DIY Section (Do-It-Yourself)	65	07-29-2012 07:49 PM
Radar Detector Hardwire?	ImportConvert	Audio & Video	12	11-05-2011 12:04 AM
Escort radar detector hardwire	HellfighterZ	Audio & Video	6	04-16-2010 07:07 PM
Hardwire Radar Detector	zero610	Audio & Video	7	03-04-2009 07:52 PM