New Install AVH 4500

cheshirecat · 05-30-2013, 02:13 PM

That looks like the AC control system busted open.

As far as the glare, I would suggest turning up the brightness and contrast quite a bit, as well as tilting the screen 3-4 "increments". Glare was unmanageable otherwise.

Cbtech · 05-30-2013, 05:05 PM

yeah i did all different angles

nothing works for that glare

Infamous · 05-30-2013, 07:49 PM

My hu isn't turning on. I think I have everything wired correctly. I've installed hu's before, but none using aswc axxess. I'm befuddled. How many wires on the axxess get hooked up, 3? Ground, power and remote and plug in the 3.5mm?

Cbtech · 05-31-2013, 05:41 PM

I only use three wires and the 3.5mm when I hooked up the axis. But then again I can't get mine to switch sources or tracks.

sent via my wrist watch calculator

kenchan · 05-31-2013, 07:47 PM

im using a pac so dont know. mine works perfectly though.

cheshirecat · 06-03-2013, 03:53 PM

Quote:

Originally Posted by Infamous

My hu isn't turning on. I think I have everything wired correctly. I've installed hu's before, but none using aswc axxess. I'm befuddled. How many wires on the axxess get hooked up, 3? Ground, power and remote and plug in the 3.5mm?

Make sure you have a good ground. The bolt in the middle of the cubby up near the triple gauge worked fine for me.

3seventz · 06-13-2013, 07:47 PM

Hello new member here. I have been searching and haven't found a definite answer.

Is that blue wire from the antenna adapter ok to splice with the microbypass blue + blue/white wire from the radio harness ? if not where did you connect yours?

Thanks in advance.

Cbtech · 06-14-2013, 03:47 PM

Quote:

Originally Posted by 3seventz

Hello new member here. I have been searching and haven't found a definite answer.

Is that blue wire from the antenna adapter ok to splice with the microbypass blue + blue/white wire from the radio harness

Yes

cheshirecat · 06-14-2013, 04:18 PM

Quote:

Originally Posted by 3seventz

Hello new member here. I have been searching and haven't found a definite answer.
Is that blue wire from the antenna adapter ok to splice with the microbypass blue + blue/white wire from the radio harness ? if not where did you connect yours?
Thanks in advance.

Yup- the 350 and 370 have an antenna amplifier that needs power from that line. Splice away.

kenchan · 07-19-2013, 11:11 PM

Quote:

Originally Posted by Cbtech

Here is the glare from the direction that I'm sitting at.

Attachment 70084

sent via my wrist watch calculator

do you have a follow up pict comparo with your new kenwood?

Cbtech · 07-20-2013, 12:00 AM

Quote:

Originally Posted by kenchan

do you have a follow up pict comparo with your new kenwood?

It's MUCH better I'll have to get a pic tomorrow and post it up

Sent from my Palm Pilot circa 1997...

kenchan · 07-20-2013, 12:42 AM

yah, i still haven't encountered my 4500BT being that washed out. might be something to do with the top film that was used on your production lot or something, but sounds

that you fixed your situation.

Cbtech · 07-22-2013, 08:51 PM

Quote:

Originally Posted by kenchan

do you have a follow up pict comparo with your new kenwood?

Here's the pic with the Kenwood

Sent from my Palm Pilot circa 1997...

kenchan · 07-23-2013, 12:36 PM

that's definitely in improvement but your screen is tilted now...

Cbtech · 07-23-2013, 02:58 PM

Quote:

Originally Posted by kenchan

that's definitely in improvement but your screen is tilted now...

I edited the pic a little to show the Pioneer was tilted at the time too...

05-30-2013, 05:05 PM	#107 (permalink)
Cbtech A True Z Fanatic Join Date: Feb 2013 Location: Sacramento, CA Posts: 1,372 Drives: 40th Anniversary Rep Power: 15	yeah i did all different angles nothing works for that glare __________________ Are U in Sacramento or Central Valley California? Click here! Foglight Hardwire in less than 10 minutes! DIY: Automatic VDC off

05-31-2013, 05:41 PM	#109 (permalink)
Cbtech A True Z Fanatic Join Date: Feb 2013 Location: Sacramento, CA Posts: 1,372 Drives: 40th Anniversary Rep Power: 15	I only use three wires and the 3.5mm when I hooked up the axis. But then again I can't get mine to switch sources or tracks. sent via my wrist watch calculator __________________ Are U in Sacramento or Central Valley California? Click here! Foglight Hardwire in less than 10 minutes! DIY: Automatic VDC off

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PLS Help! 4.08 FD Install?	JC671	Engine & Drivetrain	6	09-21-2012 09:55 PM
[FOR SALE] 2012 Premium GTR Wheels (used 1250 miles) $4500 shipped	88fc3sw/hx83	Parts for sale (Private Classifieds)	6	01-02-2012 12:42 PM
[FOR SALE] (OR) 2012 Premium GTR Wheels (only driven for ~1250 miles) 4500 shipped	88fc3sw/hx83	Parts for sale (Private Classifieds)	1	11-20-2011 08:42 PM
4500 RPM or above with short shifter	theDreamer	Nissan 370Z General Discussions	18	05-30-2011 11:43 AM
2009 Silver - Sport Pack, Automatic, 4500 Miles	BBALL99	370Z For Sale	0	06-22-2010 11:34 AM

05-30-2013, 02:13 PM	#106 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 292	That looks like the AC control system busted open. As far as the glare, I would suggest turning up the brightness and contrast quite a bit, as well as tilting the screen 3-4 "increments". Glare was unmanageable otherwise.

05-30-2013, 07:49 PM	#108 (permalink)
Infamous Track Member Join Date: May 2012 Location: Las Vegas Posts: 656 Drives: 2012 Nissan 370z mt Rep Power: 14	My hu isn't turning on. I think I have everything wired correctly. I've installed hu's before, but none using aswc axxess. I'm befuddled. How many wires on the axxess get hooked up, 3? Ground, power and remote and plug in the 3.5mm?

05-31-2013, 07:47 PM	#110 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	im using a pac so dont know. mine works perfectly though.

07-20-2013, 12:42 AM	#117 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah, i still haven't encountered my 4500BT being that washed out. might be something to do with the top film that was used on your production lot or something, but sounds that you fixed your situation.

07-23-2013, 12:36 PM	#119 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	that's definitely in improvement but your screen is tilted now...