Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Audio & Video (http://www.the370z.com/audio-video/)
-   -   Remote start/ alarm questions (http://www.the370z.com/audio-video/65533-remote-start-alarm-questions.html)

bigaudiofanat 01-11-2013 10:18 PM

Remote start/ alarm questions
 
Alright guys, I am planning on installing a system using a idatalink bypass module and either viper or compustar pro alarm/remote start.

A few questions for those of you that have one on your Z.

Can you still use your stock fob to get in and out? Re arm and disarm?

Does the push button entry on the door still work and does it disarm as well?

Any problems you would like to report?

What is the procedure you have to do when you get in to shut down your remote start and for you to drive?

Can you pop your trunk from the aftermarket remote and if so do you know how the installer did it, (cambus or direct wiring)

bigaudiofanat 01-15-2013 03:03 PM

No one has a remote start on their Z?

Haboob 01-15-2013 03:31 PM

A few have. We had this thread in General a bit ago, it may have some info. for you (though I think we mostly bitched about it :icon17:).

Remote Start for Z

Wish I could be of more help, but I've never done this on any of my cars and am wary of doing it on any manual car.

BigNate 01-15-2013 10:21 PM

Quote:

Originally Posted by bigaudiofanat (Post 2106496)
Alright guys, I am planning on installing a system using a idatalink bypass module and either viper or compustar pro alarm/remote start.

A few questions for those of you that have one on your Z.

Can you still use your stock fob to get in and out? Re arm and disarm?
only if you use D2D and not W2W

Does the push button entry on the door still work and does it disarm as well?
yes
Any problems you would like to report?
there is no key take over after remote start so upon entering the vehicle the driver will be forced to turn the car off and restart it and there

What is the procedure you have to do when you get in to shut down your remote start and for you to drive?
press the brake and restart the car

Can you pop your trunk from the aftermarket remote and if so do you know how the installer did it, (cambus or direct wiring)
wiring the instal d2d will handle this and for the record it is CANbus

/////

bigaudiofanat 01-16-2013 05:47 PM

Thanks Nate, from what i am reading though you do not have to shut down the vehicle and restart it. Just have to do a certain process. Glad to see I will not lose a lot of the functions.


All times are GMT -5. The time now is 12:14 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2