Pioneer AVH-X4500BT

Coon-azz

Ok, as I'm installing the new Pioneer, the Crutchfield kit included an antena adapter. When I pull out the stock non-Bose stero, there is nothing on the back for an antena conections. So if I install this on the new Pioneer, where does it go to in the car? There are not visible male to female antena connections. I'm lost. Any help would be greatly appreciated.

__________________
I don't care how slow you want to drive; I encourage it. JUST GET THE HELL OUT OF THE PASSING LANE YOU TUCK FARD!!!

RonRizz

try this......
Video #6 Audio Install in a 2009 370Z on Vimeo

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

Coon-azz

Thanks bro. That video was awesome. It also answered my next question on how the A/C module goes back in. Looks like it snaps back into the factory brackets.

The blue antena wire ended going to the blue "amp on" wire. So now I can get radio reception. Thanks again. Going to take a break till tomorrow when I run the Blue Tooth Mic and USB connection.

Time to pop the bubblies and prep for the festival.

I know the questions I'm asking seem simple, but this is the first stereo I've installed.

__________________
I don't care how slow you want to drive; I encourage it. JUST GET THE HELL OUT OF THE PASSING LANE YOU TUCK FARD!!!

RonRizz

That is from a string of install videos posted in the stickies by another member.....I just passed on the link. Lots of good info in those videos.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

cheshirecat

The reason this is the case is because the 370z (like the 350) has an external amplifier for radio reception which requires power. If you don't hook up a 12v lead to it, your reception will be absolutely terrible. Just a quite note in case someone ends up searching this thread later.

Coon-azz

Thanks for the input. I finally got the system in. Still ended up with two extra screws LOL, but so far seems like everything but the DVD/APPs option is working. I didn't splice the e-brake sensor wire in since I'm going to go with the bypase module next week. BTW, grounding the green bypass wire DID NOT work on this unit.

__________________
I don't care how slow you want to drive; I encourage it. JUST GET THE HELL OUT OF THE PASSING LANE YOU TUCK FARD!!!

2010ZilverZ

I have the pioneer AVH P4300 and I used a 5 pin relay for the parking brake by-pass to work correctly

cheshirecat

Yep, you need a relay like this.

Amazon.com: Parking Brake Override Bypass Fully Automatic Video in Motion for Pioneer Models AVH-X1500DVD AVH-X2500BT AVH-X3500BHS AVH-X4500BT AVH-X5500BHS: Everything Else

bigaudiofanat

Only works for the kenwood as far as I know.

Also hope you bought the warranty for your pioneer. Could have problems next year.

__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know
Direct email address reimermatt@gmail.com
Owner of: Dynamic Mobile Audio Follow me below
https://www.facebook.com/Dynamicmobileaudio/

RonRizz

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

bigaudiofanat

Only post what I have seen and proved.

__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know
Direct email address reimermatt@gmail.com
Owner of: Dynamic Mobile Audio Follow me below
https://www.facebook.com/Dynamicmobileaudio/

RonRizz

I certainly hope you're not still hung up on the pico fuse thing. 99% of those problems were operator error, caused by people pulling RCA's with the head powered up. I have used and installed Pioneer products for nearly 30 years, and have yet to come across One. And I've installed literally hundreds of their units.
By the way, they are not the only outfit that uses them, FYI

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

RonRizz

Just to satisfy my curiosity, what have you proven about pioneer, and where can I see it?

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

bigaudiofanat

Not just pico fuse but cd's not ejecting all the way, displays failing or not contacting correctly after time, internal BT failing, poor quality ipod cables, mic echo no matter where mic is located.

Just search around the audio forums. They are all there. There use to be a HUGE thread on car audio.com with countless back and forth about the quality of pioneer, some love them a lot hated them.

Here is one locally.

Bluetooth gone on X920BT??

IMO I have never had really good luck with them. I have even had other respected installer agree with me on their quality. Have I had no problems with a lot of the pioneer units I have installed? Of course I still do not care for them.

__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know
Direct email address reimermatt@gmail.com
Owner of: Dynamic Mobile Audio Follow me below
https://www.facebook.com/Dynamicmobileaudio/

RonRizz

I can find that same info on EVERY brand just as easily.
Don't get me wrong, I'm no pioneer fanboy by any means, it just steams me when I see someone bash an entire product line because THEY had a problem (most self-inflicted) with the single item they had.
Maybe its me. Maybe part of it is from seeing so many posts where the person says "I just got this Brand x stereo, and It wouldn't power up. Brand x blows, I'll never buy it again" 2 days later he reposts, "lol, I had the black and red wires hooked up wrong. my bad" Well, 1000 others already came across that post, and also now hate brand x, never returning to read the updated post.
Perfect example right here in this forum.... OP installs clarion H.U, and has minor trim ring issue, but loves the unit. He gets recommendations to trash it and go with a different brand. Why, over a $12 dash kit? BS
On a side note, How do you bash a product in here, and tomorrow someone comes and wants you to install one in their car? Do you tell them the $500 radio they just bought is junk, but you'll put it in anyway? doesn't seem too business savvy

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals