Just want more bass for Bose

sparky

Well I'm tapped off the sub output so I want it at speaker level.
I got the mount built and installed, relocated the Bose amp, wired and installed the alpine amp and ran the power lead from the battery. I had to order the LC2i so once it comes in tomorrow I'll be able to finish it all up.

__________________
2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

pfdaxe

I'll be doing the same soon. My LC2i will be delivered tomorrow also. I'm waiting on my Wicked CAS corner box to be shipped. Still deciding on an amp. Either the Alpine MRP-M500 or Fosgate R500-1D. Both are comparable. The Fosgate does come with a bass/gain remote.

__________________
Build Thread: http://www.the370z.com/members-370z-...xes-build.html

sparky

I got the alpine mrp m500 as well so I'll let you know how it goes. I will say that it was a very tight fit and tricky to get in the space in front of the struts.

__________________
2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

pfdaxe

The Fosgate is about 3" smaller. I've read good reviews on both.

__________________
Build Thread: http://www.the370z.com/members-370z-...xes-build.html

sparky

It's the width or front to back that would be the issue. I would go with something around 9" or less.
Now I'm just trying to figure out the best way to set this up as the amp and LC2i have a gain on them.

__________________
2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates