amp and wire question!

arnoldas

I have one more question, i have the Kenwood DNX6190HD headunit with a back up camera and i was wondering after i disconnect the original head unit will this new one hook right up or do i need to buy any adapter wires?

RonRizz

u need wiring harness and antenna adaptor. the z has a power(ed) antenna.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

arnoldas

alright thanks, do i use both harnesses the one that came with the unit and the Z ones? or just the new Z harnesses?

RonRizz

wiring that came with unit splices into new harness (they should be color-matched) which plugs (male) into factory plug(female)

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

arnoldas

when i run the new wires for the speakers, should i just snake them threw and where should i put the crossovers

RonRizz

I suggest you look at the sticky threads, and watch the install videos.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

arnoldas

already watched them like 5 times, so im guessing theres not other place then putting them under a seat? would the crossovers fit in the doors?

RonRizz

not a wise choice, due to moisture concerns. you can basically put them anywhere in the cabin of the car. back at amp, behind seat, under seat, behind kickpanels, under dash, ect, ect.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

arnoldas

alright thanks

arnoldas

If I have a kenwood headunit can I ground the parking brake wire directly to the body without a relay?

37Z

Some have luck locating the componet crossovers behind the kick panel. Their is the fuse box in the driver's side and the ECU on the passenger side.

arnoldas

do you guys know if i can keep the stock speaker wires for the front doors even tho i changed the speakers and changed the wires going to the crossover from the headunit, i feel like it would be an extreme pain in the *** to run new wires threw the door.