Hi all. I just had a Kenwood 9990HD installed yesterday at a reputable shop. Everything works great except I have no sound out of my rear speakers. I am no
|
|
LinkBack | Thread Tools | Display Modes |
09-19-2012, 11:08 AM | #1 (permalink) |
Base Member
Join Date: Aug 2012
Location: Atlanta, GA
Posts: 109
Drives: Nismo 370Z, Pearl
Rep Power: 13 |
Kenwood 9990 HD installed, no rear speaker output?
Hi all. I just had a Kenwood 9990HD installed yesterday at a reputable shop. Everything works great except I have no sound out of my rear speakers. I am no guru when it comes to audio setup.
I playaed around with the usuall listening position, speaker settings etc.. The headunit is not recognizing the rear speakers. I can not individually adjust them as I can with the front speakers. Also, on the main audio page when I am listening to XM, at the bottom of the screen are the works "rear speaker" with a picture of a little speaker after it and an X after the picture. So it reads "rear speaker, pic, X" Anyone have any idea on how to change this? I called the shop and they said everything was hooked up properly but did not how to adjust it without bringing it back in, which is quite a drive..
__________________
2012 Nismo, PW #512. FI CBE SS w/12" Res, Stillen g3's, UpRev, Kenwood 9990HD, Focal speakers and tweeters, Wicked Cas corner box with JL 10" w6, 35% ceramic tint, full clear bra. |
09-19-2012, 11:22 AM | #2 (permalink) |
Track Member
Join Date: Jul 2009
Location: tampa
Posts: 799
Drives: 09 370z
Rep Power: 17 |
look for speaker set up somewhere in your menu, under the rear speaker menu there is an option for no rear speakers. evidently they selected this option. you can change this setting to the size of rear speakers you have installed or oem.
__________________
FI CBE, 20" forged specialties rims, swift springs, boston subs, kicker amp, focal components |
09-19-2012, 11:35 AM | #3 (permalink) |
Base Member
Join Date: Aug 2012
Location: Atlanta, GA
Posts: 109
Drives: Nismo 370Z, Pearl
Rep Power: 13 |
Thats the thing. I have set the fronts and rears to OEM, which I will replace in a few weeks.
I am set in single zone right now. Even if I try duel zone, I can adjust the settings on the front speakers but not the rears. The rears look to be turned on but I have no control over them. Even if I move the volume all the way to the rear, I get nothing. I still have the "rear speaker X" thing going on even though I have OEM speakers set. GRRR
__________________
2012 Nismo, PW #512. FI CBE SS w/12" Res, Stillen g3's, UpRev, Kenwood 9990HD, Focal speakers and tweeters, Wicked Cas corner box with JL 10" w6, 35% ceramic tint, full clear bra. |
09-19-2012, 12:45 PM | #6 (permalink) | |
Car Audio Installer
|
Quote:
OP here are some threads that may help you "may not work" Where are the rear speakers located? Question about the stock rear speakers Re: Rear Speakers or None? base model, no rear sound? Rear speakers Just search rear in the audio section and you will find plenty asking where are my rears and so on.
__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ Last edited by bigaudiofanat; 09-19-2012 at 12:49 PM. |
|
09-19-2012, 01:56 PM | #7 (permalink) |
Base Member
Join Date: Aug 2012
Location: Atlanta, GA
Posts: 109
Drives: Nismo 370Z, Pearl
Rep Power: 13 |
Ok. Im an idiot then. I saw a four speaker system in numerous posts. Knowing nothing of audio I assumed this meant two front and two rear, not thinking a tweeter was a "speaker".. I can tear a car down and back but audio is a mystery to me..
Sorry for the usless thread Mods feel free to delete if will.. Edit: Thanks for the help pointing out my ignorance
__________________
2012 Nismo, PW #512. FI CBE SS w/12" Res, Stillen g3's, UpRev, Kenwood 9990HD, Focal speakers and tweeters, Wicked Cas corner box with JL 10" w6, 35% ceramic tint, full clear bra. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Just installed Kenwood 9990 and now my sub is not working | NickBaragona | Audio & Video | 11 | 05-23-2012 08:33 PM |
Kenwood 9990 or Alpine 910? | NickBaragona | Audio & Video | 3 | 05-09-2012 09:53 PM |
Kenwood DNX-6960 Install Problem, Speaker Issues | spearfish25 | Audio & Video | 5 | 04-20-2010 10:20 PM |
Got Kenwood DNX6140 Installed | dcrew1x | Audio & Video | 7 | 08-29-2009 08:54 PM |
*videos* kenwood dnx6140 installed with pioneer rear view cam | dainedazz | Audio & Video | 14 | 08-16-2009 05:40 PM |