Sub Boxes?

YoungZ · 09-18-2012, 02:40 PM

how big do you figure those boxes are gunna be? i need about .35Cu/ft each for the Image dynamics subs

tommyguns · 09-18-2012, 03:02 PM

In a rain delay today. Should be able to give you a better answer tomorrow. Speakers wont be here till Monday

YoungZ · 09-18-2012, 03:25 PM

Alright looking forward to it!

tommyguns · 09-18-2012, 07:50 PM

So you peaked my curiosity and I just had to go out and do some work. I pulled the form out and made the rings. I laid in the ring and it looks like it's going to be about at it's deepest point 14''L X 9"W X 12"H. Here's where you come in, I need you to convert this to cubic feet for me

. Now keep in mind depending where you decide to trim the form, you can add and decrease the volume.

Stapel65 · 09-18-2012, 08:48 PM

I get 0.875 cubic feet (14x9x12)/1,728

Considering an audio upgrade so let me know how this turns out

tommyguns · 09-18-2012, 09:00 PM

Thanks for the info. Now we all have to keep in mind that there are odd angles and it's not consistent in shape, so my optimum size is .65 for the Morel's so I should be right there.

YoungZ · 09-18-2012, 09:01 PM

i concur should be pretty close to .875 ft^3 im definitely going to mount the ring as close to flush with the plastic over the strut as possible, how much clearance do you figure i would have? i need 5" minimum. i can use up to .5 ft^3 and still have a pretty nice roll off. looks awesome by the way!

tommyguns · 09-18-2012, 09:19 PM

Thanks for the props! That was a concern of mine also. Now that you recalculated, I will be dropping the ring an inch. Right now as they sit, the dowels are 13" for the top which attaches at the furthest point in the box, 8" for the bottom two. We could probably drop it another 1" and you would still have the 5" depth that you need and be just above the strut tower. I went a little high due to the fact that I wasn't sure how to convert the numbers, so I figured more is better. I do like the look a little lower. If you need 5" depth I wouldn't go more then maybe 1.5"'s, although tilting the angle of the ring a little forward would provide you a little more depth. I’m not a fan of that look, but that's all about taste.I need 4.5"

YoungZ · 09-18-2012, 10:26 PM

Nice! thanks for the info! i could get away with 4.5" if i had to. i bought the fiberglass and stuff today so i will be doing this as soon as i get my car back!

tommyguns · 09-20-2012, 05:15 PM

Here's the shape I'm going with.

bigaudiofanat · 09-20-2012, 05:21 PM

Nice bro!

tommyguns · 09-20-2012, 07:27 PM

Taking shape! I really should start a build thread.

YoungZ · 09-20-2012, 08:44 PM

Looks Awesome Man! Can't wait to see the finished product!

tommyguns · 09-20-2012, 09:42 PM

Thanks guys.I'm working on the angle of the ring. I'm thinking slightly towards the seating area, following the angle of the strut tower. Any thoughts?

tommyguns · 09-20-2012, 10:03 PM

I'm thinking that this will be the spot for me. I really didn't want them facing the cabin, but due to their size, I don't think it will be over powering. That’s why I’m holding onto my other enclosure.

09-18-2012, 03:02 PM	#17 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 65 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 17	In a rain delay today. Should be able to give you a better answer tomorrow. Speakers wont be here till Monday __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG

09-18-2012, 09:00 PM	#21 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 65 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 17	Thanks for the info. Now we all have to keep in mind that there are odd angles and it's not consistent in shape, so my optimum size is .65 for the Morel's so I should be right there. __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG

09-18-2012, 09:19 PM	#23 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 65 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 17	Thanks for the props! That was a concern of mine also. Now that you recalculated, I will be dropping the ring an inch. Right now as they sit, the dowels are 13" for the top which attaches at the furthest point in the box, 8" for the bottom two. We could probably drop it another 1" and you would still have the 5" depth that you need and be just above the strut tower. I went a little high due to the fact that I wasn't sure how to convert the numbers, so I figured more is better. I do like the look a little lower. If you need 5" depth I wouldn't go more then maybe 1.5"'s, although tilting the angle of the ring a little forward would provide you a little more depth. I’m not a fan of that look, but that's all about taste.I need 4.5" __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG Last edited by tommyguns; 09-18-2012 at 09:35 PM.

09-20-2012, 05:21 PM	#26 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Nice bro! __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

09-20-2012, 09:42 PM	#29 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 65 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 17	Thanks guys.I'm working on the angle of the ring. I'm thinking slightly towards the seating area, following the angle of the strut tower. Any thoughts? __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG

09-18-2012, 02:40 PM	#16 (permalink)
YoungZ Base Member Join Date: Sep 2012 Location: Nanaimo Posts: 37 Drives: 2010-370z-Blue-6Mt Rep Power: 249	how big do you figure those boxes are gunna be? i need about .35Cu/ft each for the Image dynamics subs

09-18-2012, 03:25 PM	#18 (permalink)
YoungZ Base Member Join Date: Sep 2012 Location: Nanaimo Posts: 37 Drives: 2010-370z-Blue-6Mt Rep Power: 249	Alright looking forward to it!

09-18-2012, 08:48 PM	#20 (permalink)
Stapel65 Base Member Join Date: Sep 2012 Location: Madison, WI Posts: 8 Drives: 2011 370z Base/Sport Rep Power: 13	I get 0.875 cubic feet (14x9x12)/1,728 Considering an audio upgrade so let me know how this turns out

09-18-2012, 09:01 PM	#22 (permalink)
YoungZ Base Member Join Date: Sep 2012 Location: Nanaimo Posts: 37 Drives: 2010-370z-Blue-6Mt Rep Power: 249	i concur should be pretty close to .875 ft^3 im definitely going to mount the ring as close to flush with the plastic over the strut as possible, how much clearance do you figure i would have? i need 5" minimum. i can use up to .5 ft^3 and still have a pretty nice roll off. looks awesome by the way!

09-18-2012, 10:26 PM	#24 (permalink)
YoungZ Base Member Join Date: Sep 2012 Location: Nanaimo Posts: 37 Drives: 2010-370z-Blue-6Mt Rep Power: 249	Nice! thanks for the info! i could get away with 4.5" if i had to. i bought the fiberglass and stuff today so i will be doing this as soon as i get my car back!

09-20-2012, 08:44 PM	#28 (permalink)
YoungZ Base Member Join Date: Sep 2012 Location: Nanaimo Posts: 37 Drives: 2010-370z-Blue-6Mt Rep Power: 249	Looks Awesome Man! Can't wait to see the finished product!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zenclosure Boxes	TylerZ	Audio & Video	12	07-24-2012 01:01 PM
Fuse boxes	Huan'z	Nissan 370Z Owners Manual / Service Manuals	10	03-25-2012 07:10 AM
enough space for 4 boxes of rims?	sojirovskensi	Nissan 370Z General Discussions	8	11-21-2011 11:19 AM
Ported boxes in a 370z?	Roach	Audio & Video	10	09-08-2011 10:13 AM
Spare tire well boxes 101.........	Jeff Smith	Audio & Video	16	05-05-2010 11:02 PM