Crossover Help

bigaudiofanat · 06-27-2009, 12:51 AM

They can do it it is just they are designed for regular speakers.

zero610 · 06-27-2009, 04:50 PM

That is a little misleading. You are correct that you need to balance the ohm load. However, if you have 2 component speakers (left and right) on the front that are 4 ohm each that means the front is loaded with 8 ohms...hence you need an 8 ohm sub on the rear channel if it is bridged. If I were using the rear in stereo, I would agree with you that 4 ohms on each right and left would be appropriate.

This configuration is straight out of the JL 300/4 owners manual.

bigaudiofanat · 06-27-2009, 07:29 PM

So I have talked to a few new people and there saying that you will be fine. So I guess I am wrong on that aspect. Enjoy your system.

06-27-2009, 12:51 AM	#16 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	They can do it it is just they are designed for regular speakers. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ Last edited by bigaudiofanat; 06-30-2009 at 11:35 PM.

06-27-2009, 07:29 PM	#18 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	So I have talked to a few new people and there saying that you will be fine. So I guess I am wrong on that aspect. Enjoy your system. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ Last edited by bigaudiofanat; 06-30-2009 at 11:34 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stock crossover location for front speakers	Lost	Audio & Video	17	09-17-2009 08:01 PM
Crossover Settings?	bpd138	Audio & Video	4	05-30-2009 03:12 PM
2009 Nissan Skyline Crossover for Japan	BanningZ	Other Vehicles	4	04-16-2009 09:12 PM

06-27-2009, 04:50 PM	#17 (permalink)
zero610 Base Member Join Date: Jan 2009 Location: Houston, TX Posts: 89 Drives: 09 370Z Sport Rep Power: 16	That is a little misleading. You are correct that you need to balance the ohm load. However, if you have 2 component speakers (left and right) on the front that are 4 ohm each that means the front is loaded with 8 ohms...hence you need an 8 ohm sub on the rear channel if it is bridged. If I were using the rear in stereo, I would agree with you that 4 ohms on each right and left would be appropriate. This configuration is straight out of the JL 300/4 owners manual.