0 Guage power cable

KindBuddy · 08-12-2012, 01:42 AM

Has anyone run 0 guage cables? I have some lying around and would like to use it, but thought I'd ask if there was an easy way to run it through the firewall without much modification. It seems hard to get a tool in there to open up a hole.

bigaudiofanat · 08-12-2012, 08:19 AM

It will run just fine going through the rubber grommet located behind the battery. Just make sure to some kind of lube so the rubber does not catch the cable as your pulling it through.

XwChriswX · 08-12-2012, 06:40 PM

Quote:

Originally Posted by bigaudiofanat

It will run just fine going through the rubber grommet located behind the battery. Just make sure to some kind of lube so the rubber does not catch the cable as your pulling it through.

That just sounds dirty big.

KindBuddy · 08-12-2012, 07:35 PM

Quote:

Originally Posted by bigaudiofanat

It will run just fine going through the rubber grommet located behind the battery. Just make sure to some kind of lube so the rubber does not catch the cable as your pulling it through.

Sweet! Thanks for the good news!

XwChriswX · 08-12-2012, 07:46 PM

I used 0 gauge at one point, the most difficult part is getting it through the opening, once it's through it's just simply pulling it through.

The most effective method I found was taking a clothes hanger (metal) and taping it with strong tape through about 6" of the cable. Then pushing that through first, with gentle tugging and easing through the opening (sometimes a 2 person job) it will eventually go through, and then you just feed/pull the rest.

bigaudiofanat · 08-13-2012, 07:50 AM

Quote:

Originally Posted by XwChriswX

That just sounds dirty big.

I know wait for the people that I have done installs for jump in. They will tell you all about the LUBE!

XwChriswX · 08-13-2012, 06:47 PM

Have you heard anything about Zenclosures going out of business?

They don't seem to have much of a presence here anymore and people aren't getting PM's responded to... I had a question myself, but haven't seen anyone representing them around anywhere.

Alstann · 08-13-2012, 10:53 PM

Quote:

Originally Posted by XwChriswX

Have you heard anything about Zenclosures going out of business?

They don't seem to have much of a presence here anymore and people aren't getting PM's responded to... I had a question myself, but haven't seen anyone representing them around anywhere.

This better be false news...I was about to order a sub box.

XwChriswX · 08-13-2012, 10:58 PM

Quote:

Originally Posted by Alstann

This better be false news...I was about to order a sub box.

It's not confirmed, it's just something to be weary of.

axmea? · 08-14-2012, 03:48 AM

0 gauge is overkill IMO. If you already have it that's fine I guess but would not buy one in most installs. Trying to snake it is a pain no matter what. Try KY jelly

bigaudiofanat · 08-14-2012, 09:46 AM

Quote:

Originally Posted by axmea?

0 gauge is overkill IMO. If you already have it that's fine I guess but would not buy one in most installs. Trying to snake it is a pain no matter what. Try KY jelly

It all depends on what your running.

XwChriswX · 08-14-2012, 06:33 PM

Quote:

Originally Posted by bigaudiofanat

It all depends on what your running.

For 1200 watt amp, stable @1ohm

2x 10" subs, 600watt rms 2ohm dual coils...

I can't remember the different wiring methods to be able to tell you if it's series or parallel.

But Both Positive/Negative coil wired to positive/negative wires. Then to one +/- terminal. Make sense?

4 gauge is enough, or 0 needed?

bigaudiofanat · 08-15-2012, 07:54 AM

Quote:

Originally Posted by XwChriswX

For 1200 watt amp, stable @1ohm

2x 10" subs, 600watt rms 2ohm dual coils...

I can't remember the different wiring methods to be able to tell you if it's series or parallel.

But Both Positive/Negative coil wired to positive/negative wires. Then to one +/- terminal. Make sense?

4 gauge is enough, or 0 needed?

I would say if your only running 1 amp stick with 4 gauge, if your going to be adding any kind of second amp down the road go with 0 gauge.

Baconboy · 08-15-2012, 09:07 AM

Just do it man, it's easier than it looks. I even snaked it without lube, because I don't like mixing rubbers with chemicals. You'll need lube because yours is fatter.

KindBuddy · 08-15-2012, 10:07 AM

Ill be running two amps, easily making over 2000 watts combined. Yes, I already have the cable sitting around so I figure I'll use it. Hell, everything I'm using is overkill. Custom front stage components with a removable sealed 15 in hatch. Thanks for all comments.

08-12-2012, 01:42 AM	#1 (permalink)
KindBuddy Base Member Join Date: Nov 2010 Location: San Antonio, TX Posts: 15 Drives: 2010 370Z RED M6 Rep Power: 15	0 Guage power cable Has anyone run 0 guage cables? I have some lying around and would like to use it, but thought I'd ask if there was an easy way to run it through the firewall without much modification. It seems hard to get a tool in there to open up a hole.

08-12-2012, 08:19 AM	#2 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	It will run just fine going through the rubber grommet located behind the battery. Just make sure to some kind of lube so the rubber does not catch the cable as your pulling it through. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

08-12-2012, 07:46 PM	#5 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	I used 0 gauge at one point, the most difficult part is getting it through the opening, once it's through it's just simply pulling it through. The most effective method I found was taking a clothes hanger (metal) and taping it with strong tape through about 6" of the cable. Then pushing that through first, with gentle tugging and easing through the opening (sometimes a 2 person job) it will eventually go through, and then you just feed/pull the rest. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

08-13-2012, 06:47 PM	#7 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	Have you heard anything about Zenclosures going out of business? They don't seem to have much of a presence here anymore and people aren't getting PM's responded to... I had a question myself, but haven't seen anyone representing them around anywhere. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Why did 370 Z go with Oil temp. guage?	geddy lee	Nissan 370Z General Discussions	45	07-05-2012 10:29 AM
Battery to amp power cable wire routing question	Pat C.	Audio & Video	5	03-10-2012 10:17 PM
What gas guage problem?	6MT	Exterior & Interior	10	04-30-2010 06:44 PM
left guage display	belvista	Exterior & Interior	4	03-29-2009 05:21 PM

08-14-2012, 03:48 AM	#10 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	0 gauge is overkill IMO. If you already have it that's fine I guess but would not buy one in most installs. Trying to snake it is a pain no matter what. Try KY jelly

08-15-2012, 09:07 AM	#14 (permalink)
Baconboy Base Member Join Date: Sep 2011 Location: Merrimack Valley, MA Posts: 121 Drives: 40th '71chev '34ford Rep Power: 14	Just do it man, it's easier than it looks. I even snaked it without lube, because I don't like mixing rubbers with chemicals. You'll need lube because yours is fatter.

08-15-2012, 10:07 AM	#15 (permalink)
KindBuddy Base Member Join Date: Nov 2010 Location: San Antonio, TX Posts: 15 Drives: 2010 370Z RED M6 Rep Power: 15	Ill be running two amps, easily making over 2000 watts combined. Yes, I already have the cable sitting around so I figure I'll use it. Hell, everything I'm using is overkill. Custom front stage components with a removable sealed 15 in hatch. Thanks for all comments.