DIY: Kenwood DNX6140 installed in my 370Z with Sirius and back up Cam (AK370Z)

bigaudiofanat · 12-29-2009, 12:32 PM

You can not do that because the camera would be pointing UP and not the correct direction.

postrin · 12-29-2009, 01:14 PM

I guess I'm lost, he has the same mount as mine, when he mounts his like the one in the picture of the 370z, his picture is upside down. Wouldn't that mean the camera is upside down in the mount? taking of the four screws and twisting the camera 180 degrees inside the mount wouldn't just turn the picture over?

P

mototrmpt · 12-29-2009, 02:04 PM

Postrin,
I didn't notice the screws last night when I installed it, but based on your pic I assume they are there. I'll try it tonight and let you know what happens. You didn't happen to get an instruction/user manual with the camera did you?

I also got official word back from Kenwood that their HU won't flip the image and that I need to install the camera correctly. I wish I thought of that.

bigaudiofanat · 12-29-2009, 02:17 PM

Quote:

Originally Posted by postrin

I guess I'm lost, he has the same mount as mine, when he mounts his like the one in the picture of the 370z, his picture is upside down. Wouldn't that mean the camera is upside down in the mount? taking of the four screws and twisting the camera 180 degrees inside the mount wouldn't just turn the picture over?

P

Not all cameras have screws some the metal is just all one piece including the mount. That is what this camera is dose screws slow access into the camera. Now you MIGHT be able to take the inside guts of it out and rotate it. BUT be careful not to damage anything or pull any wires.

Sigur · 12-29-2009, 02:51 PM

Someone at the sweatshop probably put your camera together upside down. Anyone else with the sunlight issue? Sorry no vid of it still but, been out of town and the z stuck in the garage with a new roof being put on the house.

postrin · 12-29-2009, 03:52 PM

no, no manual with mine, but it looks pretty straight forward, red is 12 volt switched, black is ground, and the RCA for video. when I test mine, the image is mirrored.

Sigur is probably right, it probably just got mounted upside down. The seller seems reasonable, I'm sure he'll replace it if you can't get it working.

P

postrin · 12-29-2009, 03:54 PM

Quote:

Originally Posted by bigaudiofanat

That is what this camera is dose screws slow access into the camera. Now you MIGHT be able to take the inside guts of it out and rotate it. BUT be careful not to damage anything or pull any wires.

Not sure what the first part means, I agree with the second part though, if it doesn't come apart easy, don't overdue it till you talk to the seller. I can;t imagine he'd want you to send the camera back to china for replacement, he'll probably just send another, but just in case, you don't want to destroy the one you have.

P

mototrmpt · 12-29-2009, 11:22 PM

Ok, here's an update on the upsidedown camera...
I took out the 4 screws and was feel pretty foolish for not thinking of this myself. After pulling the 4 screws I found I couldn't get the cover to budge. I considered taking channel locks to the cover but decided against it. I then check it out and figured that I could get a correct view if I mount the camera on the vertical surface. I had to grind the some of the mounting bracket on both sides of the camera, but I eventually got it mounted. The picture looks good, but now I think the camera faces too far down and doesn't give me enough view behind me. At this point I will live with it as is until it breaks or someone steals it. It was only $31 (compared to folks trying to sell rear view cameras for $100-$200). Hopefully the seller will reply to my question and we can work something out.

Thanks for all your help and suggestions.

Lance

AK370Z · 12-29-2009, 11:34 PM

Quote:

Originally Posted by mototrmpt

Bigaudio,
my mount looks exactly like AK's. I tried the mirror setting on the HU, but it only reverses the left side, right side aspect.

AK,
the picture in your post is the picture of the camera I purchased. If you install it upside down it will look exactly like your install. I guess that's the key..."installing it upside down". I'm a bit puzzled though since the camera referenced by "bpd138" shows it sitting point up like mine, but he also installed his "upside down".

I've sent a message to the seller to see what can be done as well as to Kenwood to see if they have fix. I was just hoping I was overlooking an obvious quick fix.

Thanks to the both of you for your help.

Lance do you have any picture of the camera? is the camera looks exactly like this?

Also, bpd used a different camera. Not like mine or yours.

Quote:

Originally Posted by postrin

I bought the same one, got it yesterday with a christmas card! Mine is definitely pointing the correct direction, I just checked it. I haven't tried, but I would think that you could take these 4 screws out and take it apart, and just flip the camera

Postrin, you have the exact same one as mine. But your (and mine) are not the same as this one. Therefore, we didn't have any problem.

Lance, please keep us posted. thanks

arcticreaver · 12-29-2009, 11:40 PM

dang, nice addition to your Z AK! wish there was something like this for touring edition.

AK370Z · 12-29-2009, 11:41 PM

Quote:

Originally Posted by arcticreaver

dang, nice addition to your Z AK! wish there was something like this for touring edition.

thanks. Do you have factory navigation and looking for a camera? Let me know

arcticreaver · 12-29-2009, 11:58 PM

Quote:

Originally Posted by AK370Z

thanks. Do you have factory navigation and looking for a camera? Let me know

i just have a touring edition no nav but want steering wheel controls along with nav and rear cam

mototrmpt · 12-30-2009, 01:05 AM

AK,
the camera you posted in your post which highlighted the mounting brackets is the one I purchased. Here is a picture of my install:
Rear Camera.JPG

I'll try to take a picture of the new install tomorrow.

As Sigur suggested, I think they installed the camera upside down in the housing.

Lance

TreeSemdyZee · 12-30-2009, 01:12 PM

I've done some searching in this thread, but didn't find a definitive answer.
Why do you need the antenna adapter? One post said that you need it because without you wouldn't get any stations. Is this true and if so, why.
I have a DNX8120 that I'm thinking of installing which I had in my 350. I just plugged the existing antenna connector into the HU and had no issues.
Does the stock 370 HU have some kind of booster built-in that the 8120 doesn't?

bigaudiofanat · 12-30-2009, 07:54 PM

Quote:

Originally Posted by TreeSemdyZee

I've done some searching in this thread, but didn't find a definitive answer.
Why do you need the antenna adapter? One post said that you need it because without you wouldn't get any stations. Is this true and if so, why.
I have a DNX8120 that I'm thinking of installing which I had in my 350. I just plugged the existing antenna connector into the HU and had no issues.
Does the stock 370 HU have some kind of booster built-in that the 8120 doesn't?

The 370z has a booster antenna built into the car. With the 350z the antenna was just exposed. You need an adapter for the booster to work and get power from the new receiver. Also it changes the plug to the one that is needed for the new aftermarket head unit. Without it you will not get any radio stations.

12-29-2009, 12:32 PM	#181 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	You can not do that because the camera would be pointing UP and not the correct direction. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

12-29-2009, 11:40 PM	#190 (permalink)
arcticreaver Track Member Join Date: Feb 2009 Location: Arcadia, CA Posts: 769 Drives: 2009 Z34 7AT PG Rep Power: 924	dang, nice addition to your Z AK! wish there was something like this for touring edition. __________________ http://www.facebook.com/arcticreaver - FaceBook http://www.linkedin.com/pub/sam-yang/a/832/325 - LinkedIn Profile

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fujimura cf Rear diffuser installed! (with pics)( AK370Z)	AK370Z	Exterior & Interior	73	04-24-2016 05:47 PM
Kenwood dnx6140 Navigation issue	Liquid_G	Audio & Video	18	06-11-2010 01:56 AM
Got Kenwood DNX6140 Installed	dcrew1x	Audio & Video	7	08-29-2009 08:54 PM
videos kenwood dnx6140 installed with pioneer rear view cam	dainedazz	Audio & Video	14	08-16-2009 05:40 PM
door chime for kenwood dnx6140	wowdusk	DIY Section (Do-It-Yourself)	1	08-03-2009 02:04 AM

12-29-2009, 01:14 PM	#182 (permalink)
postrin Base Member Join Date: Dec 2009 Location: Houston Posts: 23 Drives: Tacoma Rep Power: 16	I guess I'm lost, he has the same mount as mine, when he mounts his like the one in the picture of the 370z, his picture is upside down. Wouldn't that mean the camera is upside down in the mount? taking of the four screws and twisting the camera 180 degrees inside the mount wouldn't just turn the picture over? P

12-29-2009, 02:04 PM	#183 (permalink)
mototrmpt Base Member Join Date: Nov 2009 Location: Salt Lake City Posts: 57 Drives: 09 370Z M6 Rep Power: 16	Postrin, I didn't notice the screws last night when I installed it, but based on your pic I assume they are there. I'll try it tonight and let you know what happens. You didn't happen to get an instruction/user manual with the camera did you? I also got official word back from Kenwood that their HU won't flip the image and that I need to install the camera correctly. I wish I thought of that.

12-29-2009, 02:51 PM	#185 (permalink)
Sigur Base Member Join Date: Sep 2009 Location: Houston, TX Posts: 92 Drives: 09 370Z BS M6 Rep Power: 16	Someone at the sweatshop probably put your camera together upside down. Anyone else with the sunlight issue? Sorry no vid of it still but, been out of town and the z stuck in the garage with a new roof being put on the house.

12-29-2009, 03:52 PM	#186 (permalink)
postrin Base Member Join Date: Dec 2009 Location: Houston Posts: 23 Drives: Tacoma Rep Power: 16	no, no manual with mine, but it looks pretty straight forward, red is 12 volt switched, black is ground, and the RCA for video. when I test mine, the image is mirrored. Sigur is probably right, it probably just got mounted upside down. The seller seems reasonable, I'm sure he'll replace it if you can't get it working. P

12-29-2009, 11:22 PM	#188 (permalink)
mototrmpt Base Member Join Date: Nov 2009 Location: Salt Lake City Posts: 57 Drives: 09 370Z M6 Rep Power: 16	Ok, here's an update on the upsidedown camera... I took out the 4 screws and was feel pretty foolish for not thinking of this myself. After pulling the 4 screws I found I couldn't get the cover to budge. I considered taking channel locks to the cover but decided against it. I then check it out and figured that I could get a correct view if I mount the camera on the vertical surface. I had to grind the some of the mounting bracket on both sides of the camera, but I eventually got it mounted. The picture looks good, but now I think the camera faces too far down and doesn't give me enough view behind me. At this point I will live with it as is until it breaks or someone steals it. It was only $31 (compared to folks trying to sell rear view cameras for $100-$200). Hopefully the seller will reply to my question and we can work something out. Thanks for all your help and suggestions. Lance

12-30-2009, 01:05 AM	#193 (permalink)
mototrmpt Base Member Join Date: Nov 2009 Location: Salt Lake City Posts: 57 Drives: 09 370Z M6 Rep Power: 16	AK, the camera you posted in your post which highlighted the mounting brackets is the one I purchased. Here is a picture of my install: Rear Camera.JPG I'll try to take a picture of the new install tomorrow. As Sigur suggested, I think they installed the camera upside down in the housing. Lance

12-30-2009, 01:12 PM	#194 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,885 Drives: '09 370 & ‘14 Juke Rep Power: 27409	I've done some searching in this thread, but didn't find a definitive answer. Why do you need the antenna adapter? One post said that you need it because without you wouldn't get any stations. Is this true and if so, why. I have a DNX8120 that I'm thinking of installing which I had in my 350. I just plugged the existing antenna connector into the HU and had no issues. Does the stock 370 HU have some kind of booster built-in that the 8120 doesn't?