Bigaudiofanatic's Special

bigaudiofanat · 06-08-2012, 04:16 PM

Now through July 1st I will be offering 2 specials.

Special 1

Free component install when you get a head unit installed.
"Extra if they will be powered off a amp"

Special 2

Free head unit and steering wheel controls installed when you get a full car detail done "must provide head unit and steering wheel control module". Detailing is 200 and usually takes 7-8 hours to do.

Please contact me if with any questions.

Offers can NOT be combined

eastwest2300 · 06-13-2012, 02:13 AM

Its been a long time since I've been over to this section of the forum.. Congrats on getting your business/website off the ground, thats awsome man!

XwChriswX · 06-13-2012, 02:26 AM

Big - When you do a component install, do you have the tweets and mids in a co-ax setup in the door and take out the stock tweets. Or do you put in the tweets in the stock location?

The reason I ask is when I put in my components, I'm thinking of leaving the tweets in their stock location, and I'm trying to find the hard plastic that can be used for the mount. But I can't seem to find it anywhere in a store. Do you know what I'm talking about? It's a 1/4" black hard plastic...

bigaudiofanat · 06-13-2012, 07:53 AM

Quote:

Originally Posted by XwChriswX

Big - When you do a component install, do you have the tweets and mids in a co-ax setup in the door and take out the stock tweets. Or do you put in the tweets in the stock location?

The reason I ask is when I put in my components, I'm thinking of leaving the tweets in their stock location, and I'm trying to find the hard plastic that can be used for the mount. But I can't seem to find it anywhere in a store. Do you know what I'm talking about? It's a 1/4" black hard plastic...

I wouldn't recommend keeping stock tweeters in weather your doing a component or coaxial speaker setup. Run all new wires and replace the stock tweeter and woofer at the same time, and be sure to use the crossover that is provided.

You can do a few different things to get the new tweeter in place. Hard sheet of plastic is one, cut out the old factory tweeter and use the stock bracket to hold the new tweeter is another.

bigaudiofanat · 06-13-2012, 07:54 AM

Quote:

Originally Posted by eastwest2300

Its been a long time since I've been over to this section of the forum.. Congrats on getting your business/website off the ground, thats awsome man!

Thanks east, still working on smoothing out some things. I should be at the PA auto show if everything goes as planned.

XwChriswX · 06-13-2012, 08:01 AM

Quote:

Originally Posted by bigaudiofanat

I wouldn't recommend keeping stock tweeters in weather your doing a component or coaxial speaker setup. Run all new wires and replace the stock tweeter and woofer at the same time, and be sure to use the crossover that is provided.

You can do a few different things to get the new tweeter in place. Hard sheet of plastic is one, cut out the old factory tweeter and use the stock bracket to hold the new tweeter is another.

Oh, no non no bud!

Sorry, I should have worded that better.

I would be replacing the stock tweeter with the new tweeter when I get my components, and using their crossover and new wiring of course. I was just curious about the new tweeters location, if I should put it back in the stock location, or move it to the door and have a co-ax setup.

90 ST · 06-13-2012, 11:52 AM

Quote:

Originally Posted by XwChriswX

Oh, no non no bud!

Sorry, I should have worded that better.

I would be replacing the stock tweeter with the new tweeter when I get my components, and using their crossover and new wiring of course. I was just curious about the new tweeters location, if I should put it back in the stock location, or move it to the door and have a co-ax setup.

Put it in the stock location, mush easier. As for how to mount it, i like using back strap, or plumers straping, (see my album) if your not sure what it is, it gives you the option of moving the tweeter a little.

bigaudiofanat · 06-13-2012, 11:57 AM

Quote:

Originally Posted by XwChriswX

Oh, no non no bud!

Sorry, I should have worded that better.

I would be replacing the stock tweeter with the new tweeter when I get my components, and using their crossover and new wiring of course. I was just curious about the new tweeters location, if I should put it back in the stock location, or move it to the door and have a co-ax setup.

If you want better sound I would get them fiber glassed into the A pillars. However that takes time and money. So you can use the stock location.

eastwest2300 · 06-14-2012, 02:09 PM

Quote:

Originally Posted by bigaudiofanat

Thanks east, still working on smoothing out some things. I should be at the PA auto show if everything goes as planned.

Nice!! Thats awesome man! Dude, I wish you nothing but success brother!

bigaudiofanat · 06-21-2012, 02:40 PM

Bump and thanks east

eastwest2300 · 06-22-2012, 02:27 AM

Quote:

Originally Posted by bigaudiofanat

Bump and thanks east

No problem brother.. anytime.

06-08-2012, 04:16 PM	#1 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Bigaudiofanatic's Special Now through July 1st I will be offering 2 specials. Special 1 Free component install when you get a head unit installed. "Extra if they will be powered off a amp" Special 2 Free head unit and steering wheel controls installed when you get a full car detail done "must provide head unit and steering wheel control module". Detailing is 200 and usually takes 7-8 hours to do. Please contact me if with any questions. Offers can NOT be combined __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ Last edited by bigaudiofanat; 06-08-2012 at 04:19 PM.

06-13-2012, 02:13 AM	#2 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,972 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	Its been a long time since I've been over to this section of the forum.. Congrats on getting your business/website off the ground, thats awsome man! __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

06-13-2012, 02:26 AM	#3 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	Big - When you do a component install, do you have the tweets and mids in a co-ax setup in the door and take out the stock tweets. Or do you put in the tweets in the stock location? The reason I ask is when I put in my components, I'm thinking of leaving the tweets in their stock location, and I'm trying to find the hard plastic that can be used for the mount. But I can't seem to find it anywhere in a store. Do you know what I'm talking about? It's a 1/4" black hard plastic... __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

06-21-2012, 02:40 PM	#10 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Bump and thanks east __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SPECIAL! EVO-R 370Z Carbon B pillars SPECIAL!	EVOR	Body Interior/Exterior	68	01-12-2012 10:15 PM
Nothing special	Onelownismo	New 370Z Owner	8	09-27-2011 10:20 PM
Memorial day special : Nissan/infiniti special	TeamARK	Exhaust/Intake	0	05-02-2011 02:49 PM
Special Thanks to AK!	FairladyZ10PG	Nissan 370Z Pricing / Ordering Discussions	6	08-14-2010 09:55 PM