My Custom speaker box for the 370z

koojo · 06-03-2009, 08:35 PM

Quote:

Originally Posted by Phimosis

That's exactly what my installer did. Remove 4" Bose subwoofer, splice input wire, add hi/low convertor, send rca off to the new amp and 12" sub.

I've done this before on my current car that has a Bose system, and everything the bass hit the treble would lower...it got really annoying. I had to get a new headunit and run the subwoofer directly to it and that fixed the problem.

Phimosis · 06-04-2009, 10:27 PM

More pix as promised:

You can see a tiny ammount of particle board around the vinyl on the amp board. when it bugs me enough, Ill get out a black sharpy and color it!

I lifted the box so you can see the fiberglass job on the bottom side. When its sitting in it's proper position, it fits in there tight as shiznizzle and you don't see any unflinished edges (except the amp board). It won't move at under under acceleration, cornering or braking.

PS. Yes, I know my job with Maguires vinyl conditioner sucks. I did it in a poorly lit garage and couldnt see the missed areas like you can when the flash is on!

PPS the box was made by "The Audio Shop" 1330 23rd St, Bakersfield, CA (661) 864-0954

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z Speaker Setup	Ricochet48	Audio & Video	19	01-09-2013 08:23 PM
Ebay: Custom Speaker box for 370z	Phimosis	Audio & Video	8	06-09-2009 05:00 PM
What are the Speaker Sizes of a 370Z	Dreamin'Z	Audio & Video	2	03-10-2009 01:40 PM
370Z Enthusiast Speaker Details	IcedZ	Audio & Video	2	03-01-2009 07:49 PM
370z Touring speaker setup???	YoungStutta	Audio & Video	5	02-09-2009 05:44 PM

06-04-2009, 10:27 PM	#2 (permalink)
Phimosis Enthusiast Member Join Date: May 2009 Location: Oildale, CA Posts: 412 Drives: 2013 911 4S Rep Power: 416	More pix as promised: You can see a tiny ammount of particle board around the vinyl on the amp board. when it bugs me enough, Ill get out a black sharpy and color it! I lifted the box so you can see the fiberglass job on the bottom side. When its sitting in it's proper position, it fits in there tight as shiznizzle and you don't see any unflinished edges (except the amp board). It won't move at under under acceleration, cornering or braking. PS. Yes, I know my job with Maguires vinyl conditioner sucks. I did it in a poorly lit garage and couldnt see the missed areas like you can when the flash is on! PPS the box was made by "The Audio Shop" 1330 23rd St, Bakersfield, CA (661) 864-0954