Sub install

pokeyl · 12-19-2011, 12:44 PM

Quote:

Originally Posted by bigaudiofanat

Did you create a box underneath that plywood?

NO, just sealed the voids. Area in the car is the box. Top just sits in, not total air tight yet.

bigaudiofanat · 12-19-2011, 01:43 PM

Quote:

Originally Posted by pokeyl

NO, just sealed the voids. Area in the car is the box. Top just sits in, not total air tight yet.

Ya you should really build a box I can see when you upgrade your subs where the box or board will just jump.

eastwest2300 · 12-20-2011, 08:20 PM

Quote:

Originally Posted by bigaudiofanat

Ya you should really build a box I can see when you upgrade your subs where the box or board will just jump.

pokeyl · 12-28-2011, 10:24 AM

Quote:

Originally Posted by bigaudiofanat

Nice sub box bad choice of brand of subs.

What about "Poineer"

PIONEER 10IN CHAMPION COMPONT SUB 10 1 100-WATT SERIES COMPONENT SUBWOOFER New | eBay

SPL VS Power look very good and the price is also right. Thoughts? I would spent the money for JL but SPL is so low I would need a larger amp to get the the correct levels. I need to stay above 90db at 1 watt at 1 meter to work. Also the subs in the car right now sound very good. If I go not have a fail I will just run them. Thanks for all the input. Pokeyl

pokeyl · 04-05-2012, 11:12 PM

Found a replacement sub JBL P1022

snizzle · 04-08-2012, 06:02 PM

did you build an enclosure yet, or still using open cab as a box? you will get better response if its boxed. also, any probs with amps overheating sitting under there? doesn't look like much space for them to breathe.

pokeyl · 04-09-2012, 08:23 PM

Still working on the enclosure, may seal it. Amp has never had problems yet.

pokeyl · 04-11-2012, 12:36 PM

Just started fitting, had to add a 4 inch spacer at the front of the head board. Still Running IB, sound is very wide band, I can now turn off all lows to the front speakers. I still need to cut a new header board (better fit) and carpet it.

BigNate · 04-11-2012, 06:57 PM

Infinite baffle by definition requires that the front wave of the woofer be completely sealed off from the rear of the woofer. Not to mention they generally utilize larger volumes of air behind the woofer to make them able to extend well below 20hz. In you current situation you would get much better overall performance from you subs if you were to build an enclosure in that area than trying to force an in install into that area. Not to mention with that small volume of air if you manage to seal the woofers off you doing to end up with a fairly low qtc which will essentially yield you a sealed enclosure

04-05-2012, 11:12 PM	#20 (permalink)
pokeyl Track Member Join Date: Nov 2010 Location: DFS Posts: 897 Drives: ??? Rep Power: 55	Found a replacement sub JBL P1022 __________________ It's not my fault I'm old, I was born a very long time ago!

04-09-2012, 08:23 PM	#22 (permalink)
pokeyl Track Member Join Date: Nov 2010 Location: DFS Posts: 897 Drives: ??? Rep Power: 55	Still working on the enclosure, may seal it. Amp has never had problems yet. __________________ It's not my fault I'm old, I was born a very long time ago!

04-11-2012, 12:36 PM	#23 (permalink)
pokeyl Track Member Join Date: Nov 2010 Location: DFS Posts: 897 Drives: ??? Rep Power: 55	Just started fitting, had to add a 4 inch spacer at the front of the head board. Still Running IB, sound is very wide band, I can now turn off all lows to the front speakers. I still need to cut a new header board (better fit) and carpet it. __________________ It's not my fault I'm old, I was born a very long time ago!

04-11-2012, 06:57 PM	#24 (permalink)
BigNate Base Member Join Date: Jan 2012 Location: Charlotte, nc Posts: 87 Drives: 07 Element SC Rep Power: 13	Infinite baffle by definition requires that the front wave of the woofer be completely sealed off from the rear of the woofer. Not to mention they generally utilize larger volumes of air behind the woofer to make them able to extend well below 20hz. In you current situation you would get much better overall performance from you subs if you were to build an enclosure in that area than trying to force an in install into that area. Not to mention with that small volume of air if you manage to seal the woofers off you doing to end up with a fairly low qtc which will essentially yield you a sealed enclosure __________________ MECP Master Certified Installation Technician Don't worry I've never done this before

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HFC install	g96818	Hawaii	30	08-11-2013 11:39 AM
Install my own GTM kit?	MattP725	Forced Induction	31	10-17-2011 09:17 AM
how do i install this LED??	dudesky	Exterior & Interior	7	07-13-2011 12:48 PM
H&R Install	jgvill	40th Anniversary 370Z	9	01-15-2011 12:34 PM
FI CBE Install Help	ENT-Z	Intake/Exhaust	6	10-29-2010 11:57 AM

04-08-2012, 06:02 PM	#21 (permalink)
snizzle Base Member Join Date: Feb 2012 Location: 'Zona Posts: 147 Drives: 2010 NISMO Rep Power: 13	did you build an enclosure yet, or still using open cab as a box? you will get better response if its boxed. also, any probs with amps overheating sitting under there? doesn't look like much space for them to breathe.