Aftermarket/Base bezel

MattP725 · 11-26-2011, 11:31 AM

The stock base bezel will work with a double din right? I bought one off this forum because I figured the fit/finish might be a bit nicer than a metra (plus it was a bit cheaper).

Can anyone tell me for sure whether I made the right choice?

TreeSemdyZee · 11-26-2011, 12:52 PM

It will work, but there is a pretty good gap all the way around. I ended up getting a Metra, but here's a picture before I put it in.

eastwest2300 · 11-26-2011, 06:18 PM

Quote:

Originally Posted by TreeSemdyZee

It will work, but there is a pretty good gap all the way around. I ended up getting a Metra, but here's a picture before I put it in.

MattP725 · 11-27-2011, 12:50 AM

Interesting. I'll fit my radio and bezel out of the car. If it doesn't mesh I'll toss it. Thanks for the info.

eastwest2300 · 11-27-2011, 02:30 AM

Quote:

Originally Posted by MattP725

Interesting. I'll fit my radio and bezel out of the car. If it doesn't mesh I'll toss it. Thanks for the info.

You can find pictures somewhere in these threads of what the radio looks like with or without the mounting bracket.

Baer383 · 11-27-2011, 09:54 AM

Quote:

Originally Posted by TreeSemdyZee

It will work, but there is a pretty good gap all the way around. I ended up getting a Metra, but here's a picture before I put it in.

The gap around my Kenwood isn't that big I guess there is a little difference between models.

bigaudiofanat · 11-27-2011, 10:54 AM

The one in the Cali thread I created shows that if you use the dash kit that you will not have any gap.

The big ones that have a problem with gaps using the stock dash panel are pioneers.

There are a few threads on this and most have pics. Do a quick search and you should find them.

eastwest2300 · 11-27-2011, 07:35 PM

Quote:

Originally Posted by Baer383

The gap around my Kenwood isn't that big I guess there is a little difference between models.

Free bump for Kenwood units!

11-26-2011, 11:31 AM	#1 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 17	Aftermarket/Base bezel The stock base bezel will work with a double din right? I bought one off this forum because I figured the fit/finish might be a bit nicer than a metra (plus it was a bit cheaper). Can anyone tell me for sure whether I made the right choice?

11-27-2011, 10:54 AM	#7 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	The one in the Cali thread I created shows that if you use the dash kit that you will not have any gap. The big ones that have a problem with gaps using the stock dash panel are pioneers. There are a few threads on this and most have pics. Do a quick search and you should find them. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket Sways and Aftermarket Exhaust	Endgame	Brakes & Suspension	5	10-29-2010 06:27 PM
Prostock Racing Interior Bezel Kit	SoCal 370Z	Exterior & Interior	7	07-22-2010 05:47 PM
Suggestion to distinguish base 370 owners' from base guest	Trips	The370Z.com Feedback, Suggestions & Questions	3	08-04-2009 03:42 AM
WTB: Shifter Bezel	nismored	Wanted	0	03-30-2009 05:54 PM

11-26-2011, 12:52 PM	#2 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,885 Drives: '09 370 & ‘14 Juke Rep Power: 27409	It will work, but there is a pretty good gap all the way around. I ended up getting a Metra, but here's a picture before I put it in.

11-27-2011, 12:50 AM	#4 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 17	Interesting. I'll fit my radio and bezel out of the car. If it doesn't mesh I'll toss it. Thanks for the info.