Retain phone button with aftermarket HU

xenogear81 · 11-02-2011, 05:42 PM

I was looking on youtube video and I came across this video

2011 Nissan 370Z Pioneer AVIC-Z130BT Navigation Metra AL & ED'S AUTOSOUND Los Angeles - YouTube

The guy said the phone button work on the steering wheel. My question is, has anyone able to get the phone button to work on their steering wheel? If so, what did you use to get that to work?

bigaudiofanat · 11-02-2011, 06:00 PM

I have not and I have done 2 bose system with the metra. Unless when you try to manual program it he did something different.

xenogear81 · 11-02-2011, 06:53 PM

I just call the guy from the number that was provided in youtube video, he said use the latest version of metra and manual program it. But he didn't really tell me what was the step he did. If you guy were able to get it to work, please show me how you did it. Thanks.

secondnissan · 11-03-2011, 04:12 AM

you have to jump ( splice ) three wires in the harness that goes into the factory bluetooth brainbox in the hatch. Unplug the factory bluetooth box and remove it. steering wheel switch a,b, and ground in / out have to spliced . Pin 12 jumped to pin 17. pin 13 to pin 18. pin 14 to pin 19. Then you have to manually program the unit. All buttons work fine in my touring. The instructions are http://contentdocs.installernet.com/...icle/12144.pdf Steering wheel instructions are here http://contentdocs.installernet.com/...icle/10973.pdf. Dont use the wires from the instruction book that come with the controler . They reversed the wire colors in the book.

bigaudiofanat · 11-03-2011, 07:32 AM

Quote:

Originally Posted by secondnissan

you have to jump ( splice ) three wires in the harness that goes into the factory bluetooth brainbox in the hatch. Unplug the factory bluetooth box and remove it. steering wheel switch a,b, and ground in / out have to spliced . Pin 12 jumped to pin 17. pin 13 to pin 18. pin 14 to pin 19. Then you have to manually program the unit. All buttons work fine in my touring. The instructions are http://contentdocs.installernet.com/...icle/12144.pdf Steering wheel instructions are here http://contentdocs.installernet.com/...icle/10973.pdf. Dont use the wires from the instruction book that come with the controler . They reversed the wire colors in the book.

Hu, I find it hard to believe you have to remove the stock BT device. I think metra finally figured it out and the firmware upgrade allows you to do so OP. The only bad thing is getting that upgrade cable from metra, I have heard it can be a PITA.

secondnissan · 11-04-2011, 04:13 AM

Well, those links are to the instructions on metra's site. Not so hard to believe. I didn't upgrade the firmware in the controller. Went down to the electronics store, bought the metra adapter off the shelf ( who knows how long it was on the shelf for ), read the directions on metra site. Programmed the unit manually and all my buttons work just fine. Oh, I guess you don't have to remove the stock bluetooth box from the trunk. You do need to unplug the harness for it though and splice the wires from the metra instructions .

xenogear81 · 11-26-2011, 07:28 PM

Me and installer tried to install this today and one thing came across was pin 13 is missing. We check it many time and we thought maybe the diagram is backward, but pin 17, 18, 19 is also empty. Has anyone came across this problem?

bigaudiofanat · 11-26-2011, 10:34 PM

Quote:

Originally Posted by xenogear81

Me and installer tried to install this today and one thing came across was pin 13 is missing. We check it many time and we thought maybe the diagram is backward, but pin 17, 18, 19 is also empty. Has anyone came across this problem?

I have not seen that problem, you sure your looking at the conector from the right end?

xenogear81 · 11-27-2011, 03:06 AM

yes we look at that harness several times. Any chance you still remember what color was pin 13?

memorylasts · 11-27-2011, 03:17 AM

Sub'd

11-02-2011, 05:42 PM	#1 (permalink)
xenogear81 Base Member Join Date: Oct 2011 Location: tx Posts: 24 Drives: 2009 370z touring Rep Power: 14	Retain phone button with aftermarket HU I was looking on youtube video and I came across this video 2011 Nissan 370Z Pioneer AVIC-Z130BT Navigation Metra AL & ED'S AUTOSOUND Los Angeles - YouTube The guy said the phone button work on the steering wheel. My question is, has anyone able to get the phone button to work on their steering wheel? If so, what did you use to get that to work?

11-02-2011, 06:00 PM	#2 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	I have not and I have done 2 bose system with the metra. Unless when you try to manual program it he did something different. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

11-27-2011, 03:17 AM	#10 (permalink)
memorylasts A True Z Fanatic Join Date: Mar 2010 Location: San Diego Posts: 1,125 Drives: Cars... Rep Power: 17	Sub'd __________________ somewhat-journal-thingy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What is this button for?	bigdog1250	Exterior & Interior	7	08-17-2011 10:28 PM
Aftermarket Headunit BT phone controls	kholy	Exterior & Interior	1	03-07-2011 04:45 PM
taking apart the push button ignition to paint the button	tl1284494730	Exterior & Interior	4	11-30-2010 02:51 PM
Aftermarket Sways and Aftermarket Exhaust	Endgame	Brakes & Suspension	5	10-29-2010 06:27 PM
What is this button for??	sonic370	Nissan 370Z General Discussions	19	10-17-2010 08:23 PM

11-02-2011, 06:53 PM	#3 (permalink)
xenogear81 Base Member Join Date: Oct 2011 Location: tx Posts: 24 Drives: 2009 370z touring Rep Power: 14	I just call the guy from the number that was provided in youtube video, he said use the latest version of metra and manual program it. But he didn't really tell me what was the step he did. If you guy were able to get it to work, please show me how you did it. Thanks.

11-03-2011, 04:12 AM	#4 (permalink)
secondnissan Base Member Join Date: May 2011 Location: chicago burbs Posts: 70 Drives: 10 370z 7at Rep Power: 14	you have to jump ( splice ) three wires in the harness that goes into the factory bluetooth brainbox in the hatch. Unplug the factory bluetooth box and remove it. steering wheel switch a,b, and ground in / out have to spliced . Pin 12 jumped to pin 17. pin 13 to pin 18. pin 14 to pin 19. Then you have to manually program the unit. All buttons work fine in my touring. The instructions are http://contentdocs.installernet.com/...icle/12144.pdf Steering wheel instructions are here http://contentdocs.installernet.com/...icle/10973.pdf. Dont use the wires from the instruction book that come with the controler . They reversed the wire colors in the book.

11-04-2011, 04:13 AM	#6 (permalink)
secondnissan Base Member Join Date: May 2011 Location: chicago burbs Posts: 70 Drives: 10 370z 7at Rep Power: 14	Well, those links are to the instructions on metra's site. Not so hard to believe. I didn't upgrade the firmware in the controller. Went down to the electronics store, bought the metra adapter off the shelf ( who knows how long it was on the shelf for ), read the directions on metra site. Programmed the unit manually and all my buttons work just fine. Oh, I guess you don't have to remove the stock bluetooth box from the trunk. You do need to unplug the harness for it though and splice the wires from the metra instructions .

11-26-2011, 07:28 PM	#7 (permalink)
xenogear81 Base Member Join Date: Oct 2011 Location: tx Posts: 24 Drives: 2009 370z touring Rep Power: 14	Me and installer tried to install this today and one thing came across was pin 13 is missing. We check it many time and we thought maybe the diagram is backward, but pin 17, 18, 19 is also empty. Has anyone came across this problem?

11-27-2011, 03:06 AM	#9 (permalink)
xenogear81 Base Member Join Date: Oct 2011 Location: tx Posts: 24 Drives: 2009 370z touring Rep Power: 14	yes we look at that harness several times. Any chance you still remember what color was pin 13?