auto up initialization procedure

510z · 05-05-2009, 01:59 PM

just in case this happens to you while you are installing door speakers or doing anything inside the door. if you put everything back together and notice your auto up feature isnt working on the window and the window just rolls down everytime you open the door (without going back up after closing) do this.

INITIALIZATION PROCEDURE
1. Disconnect battery negative terminal or power window switch connector. Reconnect it after a minute or
more.
2. Door switch is OFF (close).
3. Turn ignition switch ON.
4. Operate power window switch to fully open the window. (This operation is unnecessary if the window is
already fully open.)
5. Continue pulling the power window switch AUTO-UP. Even after glass stops at the fully closed position,
keep pulling the switch for 3 seconds or more.
6. Initializing procedure is completed.
7. Inspect anti-pinch function.
CAUTION:
When initialization is not complete, power window UP does not operate while door is open.

Alex456 · 03-13-2010, 06:34 PM

Thanks a lot! It worked!

Montano370z · 04-20-2012, 07:48 PM

Thanks. I really did not want to go to the dealer for this.

05-05-2009, 01:59 PM	#1 (permalink)
510z Enthusiast Member Join Date: Mar 2009 Location: Phoenix Posts: 328 Drives: 09 370z Blue M6 Rep Power: 16	auto up initialization procedure just in case this happens to you while you are installing door speakers or doing anything inside the door. if you put everything back together and notice your auto up feature isnt working on the window and the window just rolls down everytime you open the door (without going back up after closing) do this. INITIALIZATION PROCEDURE 1. Disconnect battery negative terminal or power window switch connector. Reconnect it after a minute or more. 2. Door switch is OFF (close). 3. Turn ignition switch ON. 4. Operate power window switch to fully open the window. (This operation is unnecessary if the window is already fully open.) 5. Continue pulling the power window switch AUTO-UP. Even after glass stops at the fully closed position, keep pulling the switch for 3 seconds or more. 6. Initializing procedure is completed. 7. Inspect anti-pinch function. CAUTION: When initialization is not complete, power window UP does not operate while door is open. Last edited by 510z; 05-05-2009 at 02:00 PM. Reason: taken from service manual

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Auto door lock	Skorch	Exterior & Interior	6	07-28-2013 11:19 PM
Auto downshifting. WTF?!	Dav	Nissan 370Z General Discussions	28	07-26-2012 12:19 PM
Poll: Did you follow the Owner's Manual Break-In Procedure?	drisko	New 370Z Owner	21	10-03-2009 02:37 AM
0-62 mph,Auto best timing.?	Chan Chee Hoe	Nissan 370Z General Discussions	3	04-06-2009 10:07 PM
whats the procedure for..	g35300mm	Nissan 370Z Pricing / Ordering Discussions	1	01-06-2009 09:58 AM

03-13-2010, 06:34 PM	#2 (permalink)
Alex456 Base Member Join Date: Aug 2009 Location: Wichita Falls Posts: 1 Drives: 09 Nissan 370Z Rep Power: 16	Thanks a lot! It worked!

04-20-2012, 07:48 PM	#3 (permalink)
Montano370z Base Member Join Date: Apr 2012 Location: new york Posts: 1 Drives: 10 Nissan 370z Rep Power: 13	Thanks. I really did not want to go to the dealer for this.