370Z #2 basic upgrade! AMAZING SQ

Jeff Smith · 05-05-2009, 06:15 PM

Quote:

Originally Posted by david712370

Hey Jeff real quick, did the stock head unit have signal outputs i wouldn't think so.....

The back of the radio has pins for output to the rear but the harness doesnt have the wiring coming out of it!

Jeff Smith · 05-05-2009, 06:17 PM

Quote:

Originally Posted by tranceformer

Philthy?

OP, great job on the build. It's kinda got me interested in doing one myself.

Yep! Philthy is my good friend! I've know him for years! Competed with and against him for years on the IASCA SQ circuit!

theDreamer · 05-05-2009, 06:19 PM

Jeff, how difficult was this install of removing all the paneling and such? Looking to upgrade my head unit and speakers but I just worry about breaking or not being able to remove something properly. Once the panels and such are off, it is easy for me, but just worry about the possible damages to the car.

Jeff Smith · 05-05-2009, 08:41 PM

The radio isnt too hard start with the silver trim around the gear shifter then the leather trim under that and the rest of the panels require you to remove screws to pull them off! The doors are easy. The rocker panels & kicks are easy but the back sides for rear speakers are a pain in the a$$!

bpd138 · 05-06-2009, 05:07 AM

Jeff, Can you write a quick step by step on how to remove the rear panels for the rear speakers?
Thanks,
Willie

david712370 · 05-06-2009, 09:36 AM

download the service manual its in there... and it helped me alot... the only thing that i would give warning to is the very back panel... if you do not used something to pop up the trim you will crack the panel.

There was one thing i could find Jeff and was hoping you could help figure out. So when i was removing my head unit the big piece of trim with the vents, starter button and air bag connection. I was able to unplug the harness for the air bag quite easily but was not able to get the one off for the starter. Do you know how this comes off. It would allow me to get the big panel completely off and much easier to put things in. Everything else was really easy to take off.

Thanks

zero610 · 05-08-2009, 09:54 AM

Jeff,

Where are you running the door speaker wire to get inside the cabin to the crossover? From your pictures, I don't see anything wiring from the door to the cabin. Did you manage to get the wire into the rubber sleeve from the door to inside the cabin? Thanks.

david712370 · 05-08-2009, 10:45 AM

The pictures do not show... but I am pretty sure he ran it like the first z that he did. If you go to that thread "our first 370z" or something like that there are pictures where he went through the rubber sleave. I had a little bit of problems with this but after talking to him about it, it wasn't to hard. You have drill out a hole in the harness to get the wire through. To pop off the harness there is a lever that needs to be pushed all the way down... my problem was that it was only going about 3/4 down. It helps it you close the door slightly. This allows for the lever to go down but gives you less room for your had to get back there. Hope that helps.

cab83_750 · 05-20-2009, 12:27 AM

Quote:

Originally Posted by Jeff Smith

The back of the radio has pins for output to the rear but the harness doesnt have the wiring coming out of it!

Jeff,

Did you just hook up the front L/R output from the head unit directly to the amp, or did you have to 'filter down' the signal (with another gizmo) before the hookup to the amp?

My understanding is that as the signal is already amplified by the factory H/U, I should buy a new h/u so I have a 'clean' unamplified signal feed from the h/u to the amp.

Thanks.

P.S.,

I just bought the Dynaudio components, a Precision Power DCX1000.4 amp but I am still waiting for the right H/U. I do not actually mind keeping the basic factory h/u.

Jeff Smith · 05-20-2009, 02:30 AM

Quote:

Originally Posted by cab83_750

Jeff,

Did you just hook up the front L/R output from the head unit directly to the amp, or did you have to 'filter down' the signal (with another gizmo) before the hookup to the amp?

My understanding is that as the signal is already amplified by the factory H/U, I should buy a new h/u so I have a 'clean' unamplified signal feed from the h/u to the amp.

Thanks.

P.S.,I just bought the Dynaudio components, a Precision Power DCX1000.4 amp but I am still waiting for the right H/U. I do not actually mind keeping the basic factory h/u.

Yes I used a line output converter from peripheral electronics called a SVEN4. Its the best LOC on the market IMO!

DIGItonium · 05-20-2009, 07:33 PM

Jeff,

I'm not clear about how the 6.5" driver was mounted. Did it require an adapter?

Thanks!

-Phuong

mrarroyo · 07-04-2009, 09:16 AM

Jeff that is an amazing installation. I go to Atlanta to visit family during the Christmas Holiday but I do not think I can wait till December for the first stage of audio improvements.

Do you know of any shop in the Miami or Fort Lauderdale area that does a reasonably good job? I have a base 370Z and for the first stage I would like to replace the speakers I have on the doors and the dash. Ideally I am looking for not only a better sound but also for more efficient speakers. This to see if I could get by w/o having to install an amp (save some money).

Thanks for your help.

bigaudiofanat · 07-04-2009, 11:36 AM

I use to have the same amp I loved it to death. I sold it now getting the Lrx 5.1k!!!

05-05-2009, 06:19 PM	#18 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Jeff, how difficult was this install of removing all the paneling and such? Looking to upgrade my head unit and speakers but I just worry about breaking or not being able to remove something properly. Once the panels and such are off, it is easy for me, but just worry about the possible damages to the car. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

05-05-2009, 08:41 PM	#19 (permalink)
Jeff Smith Base Member Join Date: Apr 2009 Location: Atlanta, GA Posts: 96 Drives: The ladies crazy Rep Power: 285	The radio isnt too hard start with the silver trim around the gear shifter then the leather trim under that and the rest of the panels require you to remove screws to pull them off! The doors are easy. The rocker panels & kicks are easy but the back sides for rear speakers are a pain in the a$$! __________________ Jeff Smith Autosound Specialist Atlanta, GA

05-06-2009, 05:07 AM	#20 (permalink)
bpd138 Base Member Join Date: Apr 2009 Location: Massachusetts Posts: 38 Drives: 370Z Auto W/Sport Rep Power: 16	Jeff, Can you write a quick step by step on how to remove the rear panels for the rear speakers? Thanks, Willie Last edited by bpd138; 05-07-2009 at 08:13 PM.

05-20-2009, 07:33 PM	#26 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Jeff, I'm not clear about how the 6.5" driver was mounted. Did it require an adapter? Thanks! -Phuong __________________

07-04-2009, 11:36 AM	#28 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	I use to have the same amp I loved it to death. I sold it now getting the Lrx 5.1k!!! __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

05-06-2009, 09:36 AM	#21 (permalink)
david712370 Base Member Join Date: Apr 2009 Location: baltimore Posts: 104 Drives: 09 Nissan 370z PG M6 Rep Power: 16	download the service manual its in there... and it helped me alot... the only thing that i would give warning to is the very back panel... if you do not used something to pop up the trim you will crack the panel. There was one thing i could find Jeff and was hoping you could help figure out. So when i was removing my head unit the big piece of trim with the vents, starter button and air bag connection. I was able to unplug the harness for the air bag quite easily but was not able to get the one off for the starter. Do you know how this comes off. It would allow me to get the big panel completely off and much easier to put things in. Everything else was really easy to take off. Thanks

05-08-2009, 09:54 AM	#22 (permalink)
zero610 Base Member Join Date: Jan 2009 Location: Houston, TX Posts: 89 Drives: 09 370Z Sport Rep Power: 16	Jeff, Where are you running the door speaker wire to get inside the cabin to the crossover? From your pictures, I don't see anything wiring from the door to the cabin. Did you manage to get the wire into the rubber sleeve from the door to inside the cabin? Thanks.

05-08-2009, 10:45 AM	#23 (permalink)
david712370 Base Member Join Date: Apr 2009 Location: baltimore Posts: 104 Drives: 09 Nissan 370z PG M6 Rep Power: 16	The pictures do not show... but I am pretty sure he ran it like the first z that he did. If you go to that thread "our first 370z" or something like that there are pictures where he went through the rubber sleave. I had a little bit of problems with this but after talking to him about it, it wasn't to hard. You have drill out a hole in the harness to get the wire through. To pop off the harness there is a lever that needs to be pushed all the way down... my problem was that it was only going about 3/4 down. It helps it you close the door slightly. This allows for the lever to go down but gives you less room for your had to get back there. Hope that helps.

07-04-2009, 09:16 AM	#27 (permalink)
mrarroyo Base Member Join Date: Jun 2009 Location: Heaven on Earth Posts: 211 Drives: 09 Nissan 370Z M6 Rep Power: 16	Jeff that is an amazing installation. I go to Atlanta to visit family during the Christmas Holiday but I do not think I can wait till December for the first stage of audio improvements. Do you know of any shop in the Miami or Fort Lauderdale area that does a reasonably good job? I have a base 370Z and for the first stage I would like to replace the speakers I have on the doors and the dash. Ideally I am looking for not only a better sound but also for more efficient speakers. This to see if I could get by w/o having to install an amp (save some money). Thanks for your help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My base speaker upgrade plan	Moto	Audio & Video	5	04-26-2009 02:47 PM
The best car upgrade...EVER!	MightyBobo	The Lounge (Off Topic)	6	04-12-2009 08:01 PM
Sport Horn Upgrade	spearfish25	Nissan 370Z General Discussions	4	04-04-2009 10:55 AM
want to upgrade to pioneer avic F700BT	nappymike	Audio & Video	0	03-14-2009 11:21 AM
GT Motorsports: Fuel solutions for your VQ35DE, HR, and VHR - From basic to extreme!	George@GTM	Forced Induction	7	12-26-2008 11:05 PM