The whole kit and kaboodle for sound dampening...
 

First off I want to start this by saying that I have pulled this information from a guy on a website that has truly gone the whole nine yards and then some, in gathering info for sound dampening. I will make a major post for the info that I personally thought would be relevent.

Also I want it to be known that I am copying and pasting this info so that you don't have to read through the whole thing like I did.

Sound deadening is the first, most basic step toward controlling vehicle acoustics.

(Web) There are two general classes of deadening/damping products. Liquid deadeners can be sprayed, brushed or applied by trowel, depending on formulation. In most cases, these take some considerable time to apply. They require several layers, with curing time between applications. Since I don't have a garage and need to use my car every day, liquid products didn't seem like a good choice for me.

The second and most popular group of products are the self adhesive mats - generally a thin layer of rubberized asphalt and/or Butyl compound with a constraining layer of aluminum foil on the exposed side and release paper protecting the adhesive before installation. These are the products I will try to evaluate through a few basic tests and some observations.

In the world of automotive acoustic enhancement there is a product whose name is synonymous with the entire category. Much as Kleenex is used to describe all facial tissues, Dynamat, manufactured by Dynamic Control of North America, Incorporated in Hamilton, Ohio.

(Me) Dynamat is definitley one of the more expensive name brands out there. I have used both FatMat and Dynamat. Trust me, they are different. Dynamt works better all around. But, if you are looking for a cheaper alternative and aren't going to be in competition, I would just get FatMat.

(Web) There are plenty of recommendations out there but I found it difficult to determine which were based on solid reasoning and which had a less useful motivation. There really aren't a lot of people with significant experience with a range of products. The products change often. If you buy them for your own use, that will probably be only once every few years. If you are a professional installer, you are probably locked into one product. This isn't like speakers that you can change on a whim. If it works, it is there for good.

The basic function of these products is to:

-Add mass to panels to move resonance out of the audible range
-Reduce vibration through viscoelastic damping
-Reinforce panels to prevent flexing when subjected to sound pressure
-Act as a barrier to the transmission of unwanted sound (noise)

There are two basic concepts that need to be addressed. First, reduce the level of noise coming from outside the passenger compartment. This is the noise "floor" with which the sounds you want to hear must compete. Conversation or your audio system must be loud enough to be heard above this noise level.

Second, control the reflections, resonances and rattles that are generated by the the noises comprising the noise floor and your sound system itself.


(Me) This is for the basic info portion of the "sound dampening experience." Now onto the trials and tribulations and installations of different products. Along with some pricing to boot.

Is sound deadening mat the best way to treat rattles? Maybe. A rattle is the result of two solid objects hitting each other. It is possible that applying one of these products will stop a rattle, either by immobilizing the two solid objects, or by reducing the vibrations that are causing them to hit each other in the first place.

An effective approach is to identify the source of rattles and treat them prior to installing the mat. Make sure all parts are tightened down. Wrap wires in foam tape at the point where they contact sheet metal. Rear license plates and spoilers are notorious source of rattles.

(Me) In order to achieve that maximum "luxury car" feel or the highest SPL levels, you need to knock out all other interferances with you car. Sound dampening will help to stop outside noise and retain interior sound. (Yes there is a difference between noise and sound)

Ultimate Sound Quality
Pursuing Sound Quality can be an obsession. Selecting the finest system components and installing them perfectly will never get you to your objective if you don't pay at least as much attention to the acoustics of the vehicle.

Start with the panels we addressed in the SPL section, add noise reduction and possibly extra absorbers and you will be well on your way to a great SQ setup. By reducing sound energy loss, blocking noise from the outside and absorbing distortion inducing reflections inside the vehicle, you are cleaning up the sound you hear and lowering the noise floor with which the sounds you want to hear have to compete - any sound system will sound better and use less power. Moving on....

Basic Application Procedure
The specifics of each area are slightly different, but the basic process is the same. Remove any trim, seats, carpeting, or whatever is covering the sheet metal or plastic you want to treat. Vacuum out any dirt and dust and then wipe the area with denatured alcohol. Acetone will work, but it will remove paint, so be careful. You now have a dirt and grease free surface ready to take some sound deadener.

Start with any easy - flat, large area like part of your trunk. Cut off a piece about 8" long - I prefer a pair of heavy shears, but most people like a utility knife. With a little practice you will be able to work with pieces a foot or more long.

Peel the release paper off the first inch or so and fold it back. Now you have a piece of mat with an inch of adhesive exposed and the rest still covered with the release paper. Ready, aim, fire. Line the piece up and press the exposed adhesive down on the surface. The mat is now positioned where you want it and if not, you will still be able to get it off. Good spot? OK, start pulling the release paper down the length of the mat, pressing the exposed adhesive onto the surface as you go. Voila! First piece down. Do that a few hundred more times and you are done.

You want to use the largest piece you can for each application - but not too big. You will quickly learn what too big is, because in your impatience and growing confidence, you will finally get to the point where you exceed your capabilities and the laws of physics. You will lose control and get a bubble or a fold or something you didn't intend. No problem, take your knife and cut the bubble or fold out, press it down and all will be well. You want to have perfect contact between the mat and the surface you are attaching it to. Your utility knife and an X-Acto knife will be your friends.

While you don't need a heat gun or a roller, they may help. If you are using Peel & Seal, or one of the asphalt mats sold for automotive use, ignore the advice of the seller. If you are wearing anything heavier than a t-shirt, you must use something to warm the substrate, warm the mat and then warm the installed mat before you roll it. Be careful not to melt the adhesive or you might be accelerating the deterioration of the asphalt. At any temperature warming to about 120°F will improve the adhesion of an asphalt product. Butyl adhesives are no where near as tricky. If they are flexible enough to install, they will stick. I got a nice roller at Home Depot for wallpaper - rubber handle, plastic roller, $5. Really helps for pressing down on flat areas, and it gives you something to do while you figure out where to go next, so you don't just sit there looking dazed.

As you apply sound deadener, rap on the panel with your knuckles or a small rubber mallet. You will be able to hear the change in resonance. After you apply a layer, tap some more. This will help you determine where you need to add layers. Tap, apply, tap apply, until you are satisfied with the result.

(Me) ---Here is part of the website so that you can see some different materials with different variations and the effect of each one. Sound Deadener Showdown

Here is the price comparisons done from each product.
Sound Deadener Showdown

Hope this helps everyone with any kind of info they may have wanted on sound dampening. Keep in mind that it's not just for SPL or SQ in car audio though. The benefits are even greater for those of you that are into having good performance parts but don't really like the "drone" of many of the aftermarket parts.

Here is the website if you really wish to go through the whole thing like I did. Be prepared to be reading for about an hour or more though.
Sound Deadener Showdown

For those of you that check this out, AK has given me the power to decide if this thread belongs here or in the audio/video section. I can't figure it out on my own seeing as how this can benefit those into car audio or if the info is a general thing that everyone with any kind of mod could use. I think I should leave it up to the masses.

I think this is better geared for the A/V boys but I'm new. Really good information though and quite thorough.

Definitely A/V. And, it's a good write-up.

Thank you for the suggestions guys. I'll have the mods move it over.

Nice... I'd like to know how to reduce road noise.

I was checking out the rear wheel well underneath the fender the other day and knocked on it. There is a definite hollow sound, and I wonder if this is the source of our road noise.

I only test drove the car and I can tell you, I could hear everything from the rear wheel wells. I have already come up with a few ways I think I will go about reducing the road noise. I have read through the forum about stuff like rhino lining and sh*t like that, but that isn't going to stop the flex and reverberation in the panels. All that is going to do is add weight. I plan on using the 80mil DynamatX in conjunction with Second Skin's Overkill foam and Spectrum sludge. I am going to use the Overkill foam and Spectrum sludge under the wheel well cover, then on the exact opposite side (on the inside) I will put down the Dynamat the Overkill and the Sludge. If this doesn't work, then NOTHING will!! Not to mention a full DynamatX project through the whole car. I won't race or track it so I don't really mind the extra 75lbs or so.

Here's the site for the Second Skin stuff...http://www.secondskinaudio.com/produ...-Materials.php

The best combo that I"ve done to date is Dynamat Extreme & the use of The Dynaliner, Dynapad. Dead quiet inetriors!

I checked these out once you mentioned them and from what I can tell, they are very similar to the Luxury Liner and the Overkill that Second Skin has to offer. I think any of the combinations will have excellent results.

I think I can hear sounds from underneath the floor board, and it is most noticeable when I go over small bumps.

Before getting any of my audio stuff started, sound deadening sounds like a fun weekend project. I'm definitely considering sound deadening material like Dynamat, Elemental Designs seem to have some good prices per sq. ft. with their eDead products. 80mil sounds reasonable.

What I'll probably do is knock on various panels and mark any vulnerable spots, and then go on from there.

I was on a Mazda forum a few months back and found a guy that was so irritated with the general noises of his Mazda 6 that he spent like 2k on trying to get every tiny click, rattle,bang, etc. He ended up still hearing things that he didn't want to hear. I don't think that we'll ever fully deaden the sounds but let's be honest with ourselves, our cars are made of metal and plastics! All we can really do is try to find the best combinations of stuff to get to a comfortable sound on the interior. I would personally like to have a couple of us try different combos of things and document them so people can see and decide for themselves

Sound Deading _ Lizardskin
 

Anyone use Lizardskin? It is a "spray-on" type of sound deading.

Never heard of it. I love dynamat extreme works very well has no tar smell like some other brands.

to put it in simple terms, dynamats and butyl based deadeners are essentially mass loading to stop resonance and vibration, a good second defense is the use of a foam deadening pad to abosrb sound waves. people who use multiple layers of dynamta re wasting money, really if applied properly you dont even need to cover entire areas, jsut areas prone to resonance and vibration.

^^^above comment is right on^^^


i covered my IS300 in damplifier pro from second skin. quality product, but it can start to add weight. if i buy a Z i will use it sparingly. like everywhere Nissan used some crappy sound deadening i will go over it with a larger sheet of damplifier. but now they have a light weight version i might try.

applying a nice layer over the wheel wells on the inside of the vechicle should help with teh rock pebble noise everyone hears in the Z.

Damplifier Pro - Acoustic Vibration Dampening Mat

hope this all helps!

I want to deaden the road noise in my 370z.

I'm thinking about going with this approach:

1) Cover the whole floor from firewall to trunk (including inside wheel wells) with Second Skin Damplifier Pro.

2 - maybe) I also thought about using Dynamat Xtreme, but want to keep my costs down (and Xtreme has eXtreme added costs). Originally I was thinking of covering every interior surface first with Xtreme (firewall to trunk, inside wheel wells, inside door panels, roof, etc). But maybe all that is not necessary for my purpose. Especially if I use the Second Skin.

For those that have used either or both, what are your thoughts? I'm hoping to keep expenses down, but still kill the road noise.




EDIT: Actually, I wanted to go with this, but grabbed the wrong links...
1) Luxury Liner Pro.
2) Maybe Damplifier Pro or Dynamat Xtreme.



Cool video on the subject: http://www.youtube.com/watch?v=I5E9m...eature=related

damplifier pro is actually thicker than dynamat extreme, its definately a better value however you will be fine using regular damplifier, its close to dynamat extreme. I would also apply a layer of Luxury liner on the floor as well. That will keep eliminate more road noise than just the damplifier. The damplifier is mainly to eliminate resonance. that along with luxury liner would quiet the vehicle substantially. feel free to pm me any questions< i have tons of experience with both products.

I have used Rammat numerous times and find it superior to Dynamat and much cheaper. It doesent cut up your hands quite so bad and its more malible. It isnt as thick but a single layer is very effective and easy to apply and its thi9n enough that 2 layers where needed isnt total overkill.

I then apply ensolite, a thin foam fabric like material with spray adhesive and it absorbs even more noise. Its pretty cheap too.

RAAMaudio

I did this on my 04 dodge ram, did it for sound only but in this car where road noise is high I will be doing it for both!!

http://i34.photobucket.com/albums/d1...e/DSCN0670.jpg

I ordered enough Second Skin Damplifier Pro & Luxury Liner Pro to cover my Z, and then some. I'll probably have this done beginning the 31st (too much work & such until then).

• 100% of the inside (minus windows) will be coved in Damplifier Pro.
• The floorboard & fender wells will be covered in Luxury Liner Pro.

Thanks much for all the advice, especially to Speedfreak28 who kindly took me under his wing via PMs.

:tup:

Try to stay away from asphalt based tar-mats like FatMat. I have used FatMat before (50 sq. ft.) and it made my car smell horrible. It also melts in moderate temperatures. Dynamat is great, and I have used both the original and Xtreme with not much noticable difference. I would seriously recommend Second Skin. A great brand with amazing service. If you want some customer input, read here about Second Skin:
SSA Car Audio Forum -> Second Skin Audio

is accumat good?

I've come to acknowledge that road noise is just a characteristic of the 370z, all that padding is going to add weight

I went cheap and used peel and seal roofing repair.

No smells? How much was the roofing stuff compared to the dynomat stuff?

Wow. You might have found something here.

<experience>
Wait till your car hits 120* inside in the summer and you can't figure out how to get the smell/sludge out.
</experience>

Needless to say, that car got sold in December.

Have you determined how much weight gets added by adding dampers of any kind? I know that the spray kind is pretty heavy.

So how much quite did it get....

man your guna regret that.

the whole kit and kaboodle for sound dampening
 

Thanks to rreign for the great info, I'm going to hang on to it for any possible future need. I Purchased my Z on December 22, 2009, and have had many mornings where I am standing in my garage at 4:00 am with a cup of coffee, just admiring my 2010 Brilliant Silver with black top -Touring edition 370Z Roadster with Navigation, splash guards and carpeting, with it's 33 miles on the odometer, and anxiously looking forward to the spring when I can get her out on the road. I admit that with all the talk of noise, I'm now expecting it to sound like a freight train! Will I need ear plugs? I'll know in a few months, but are the Z vert's, or Coups for that matter, really THAT noisy? I like all that's about the sports car; noise, stiff ride and etc, and wasn't expecting - nor wanting - to experience the sound quality of a Lincoln, but, now I don't know what to expect. I just have the strong feeling that whatever it ends up being, it's going to be GREAT to me. That's one beautiful automobile, and she's got a GREAT butt!

Has anyone had success applying just dynamat or damplifier over the rear wheel wells? I think the overall noise level is fine, love the exhaust note, but the sound of sand/pebbles banging the rear wheel wells can be kind of annoying. Nissan really cheaped out not putting some kind of plastic cover inside the well. Its just metal in there.

I don't wanna spend $100, spend 2 hours applying the stuff, and add 40 lbs in weight for no difference in acoustic noise.

Any followup to this? I'm considering doing the same with the addition of using spectrum in the wheel wells (but I've heard coating the outside of a car can trap moisture next to the metal and bring on premature rusting). I'd really consider using Damplifier, Damplifier Pro, or Damplifier Lite & Luxury Liner to help quell some of the road noise in the car.

Kevin