Computer ??

ZeN · 06-24-2011, 08:22 AM

Guys, another addition of item if you want to go this route

RcJoyCon - Resistive Steering Wheel Controller

Retain steering wheel control with these unit, it will emulate all the input signal from steering as a keyboard. Here are one of the install on 350z that replace the stock cubby with OEM nav, he replace the OEM NAV screen with another touchscreen, route the NAV button through Joycon.

http://www.mp3car.com/worklogs/14677...n-console.html

Great for those who wants to throw away their cubby, a bit on the expensive side i guess.

pokeyl · 06-23-2012, 11:43 AM

Update, Final Hard Mount Install.

The first installs had the computer mounted to the center dash trim, a pain to work on as you had to disconnect cables to remove the trim. This time the comp is mounted to the plastic subframe under the dash trim.

I am going to take it to the local stereo installer and have a custom fiberglass bezel insert made.

This install pushes the computer back into the dash almost 2 inches(like the factory unit) to reduce glare.

06-24-2011, 08:22 AM	#1 (permalink)
ZeN Base Member Join Date: Apr 2011 Location: Malaysia Posts: 116 Drives: 09 PW 7AT 370z Rep Power: 15	Guys, another addition of item if you want to go this route RcJoyCon - Resistive Steering Wheel Controller Retain steering wheel control with these unit, it will emulate all the input signal from steering as a keyboard. Here are one of the install on 350z that replace the stock cubby with OEM nav, he replace the OEM NAV screen with another touchscreen, route the NAV button through Joycon. http://www.mp3car.com/worklogs/14677...n-console.html Great for those who wants to throw away their cubby, a bit on the expensive side i guess. Last edited by ZeN; 06-24-2011 at 08:27 AM.

06-23-2012, 11:43 AM	#2 (permalink)
pokeyl Track Member Join Date: Nov 2010 Location: DFS Posts: 900 Drives: ??? Rep Power: 55	Update, Final Hard Mount Install. The first installs had the computer mounted to the center dash trim, a pain to work on as you had to disconnect cables to remove the trim. This time the comp is mounted to the plastic subframe under the dash trim. I am going to take it to the local stereo installer and have a custom fiberglass bezel insert made. This install pushes the computer back into the dash almost 2 inches(like the factory unit) to reduce glare. __________________ It's not my fault I'm old, I was born a very long time ago! Last edited by pokeyl; 06-23-2012 at 11:51 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any computer guys here?	Cyberium	The Lounge (Off Topic)	18	03-09-2011 06:25 PM
Corner Computer desk	PapoZalsa	Misc Items for sale (No Z stuff)	0	02-07-2011 10:06 PM
Where are all the computer nerds?	soCo	The Lounge (Off Topic)	42	12-31-2010 12:05 PM
New Computer!	ImportConvert	The Lounge (Off Topic)	0	11-24-2010 07:39 AM
computer reset	Rooskey	Engine & Drivetrain	2	08-25-2010 11:26 PM