Kenwood DNX9980 & Cameras Installed

68cam454 · 04-24-2011, 11:08 PM

So I was just too damn busy to do the install myself (still have a lot of work on the Camaro to finish before the weather gets nice). I went to Car Toys and bought the first unit they got after haggling on price for a while.

The install went well and I really like the HU and all the functionality that's built in. I was very pleasantly surprised by how well the voice recognition works. (I used a wallpaper law2004 posted as my background)
IMG_4331 (Copy).JPG IMG_4336 (Copy).JPG IMG_4353 (Copy).JPG

The Ecoroute function with the Garmin adapter gives you the ability to display info from the OBDII port although it is fairly slow in updating.
IMG_4350 (Copy).JPG

Some of the gauges don't always display a value for some reason and I have contacted Kenwood so they will look into it. If anyone else has this problem (see picture below), please respond and also let Kenwood tech support know about it since when I called I was the first person calling them with an issue on this unit.....it had only been released for 2 days.
IMG_4348 (Copy).JPG

I had them install the Kenwood CMOS300 as the backup camera and I also had them install a CMOS200 as a forward camera to keep me from ruining my front spoiler against parking curbs. They work amazingly well and all you have to do is press the voice button and say "front camera" or "rear camera" and they come up instantly.
IMG_4399 (Copy) (2).jpg
IMG_4333 (Copy).JPG

The voice activation button was placed in what I believe to be the perfect position on the side of the console.

IMG_4403.JPG

They only thing I am not too thrilled about is how far the unit sticks out of the dash. I asked the installer if it could be moved into the dash further but he said there was enough room behind it to push it back further. I don't know if this is true or not and if anyone has side view pictures of a 9980 or 9960 installed, please post them.
IMG_4338 (Copy).JPG

370zFORme!! · 04-24-2011, 11:29 PM

It can be pushed farther back trust I had the same issue and my installer was able to push it back farther but you need the metra dash kit.

747ifly · 04-25-2011, 01:48 AM

The Ecoroute should be hot. Do you like it? I can't say how nice the cmos300 is for changing lanes while driving. The multi view is awesome. Good choice.

TreeSemdyZee · 04-25-2011, 11:45 AM

Awesome, I've got the 9960 and it sticks out a little.
I would think to recess the unit farther, you would probably need to modify the mounting brackets a little. You'd have to make the holes oblong to move it back.
It would be a whole lot easier to recess in the 370 than it was in my 350 due to the way the unit mounts.

68cam454 · 04-26-2011, 01:11 AM

Quote:

Originally Posted by 747ifly

The Ecoroute should be hot. Do you like it? I can't say how nice the cmos300 is for changing lanes while driving. The multi view is awesome. Good choice.

I haven't used it a whole lot yet but I hope they get the communication issue worked out. The cameras are absolutely perfect.

37Z · 04-26-2011, 07:13 PM

Just how slow it the engine interface? What other functions can it monitor?

68cam454 · 04-26-2011, 11:00 PM

Quote:

Originally Posted by 37Z

Just how slow it the engine interface? What other functions can it monitor?

On average, it seems to update once or twice a second but sometimes it pauses for several seconds. It also seems like there is a delay in the data compared to real time.....as an example if I rev the engine quickly to 4K and back to idle, the engine will be back down to idle before the gauge begins its climb. I'm hoping it gets better when they update the software to fix the other display issue. It can also monitor engine load percent, battery voltage and throttle position.....that's all I can remember right now.

Come on now......nobody has a picture of a Kenwood 9960 or 9980 installed so I can see if it sticks out of the dash as much as mine.

TreeSemdyZee · 04-26-2011, 11:13 PM

I'll get you a pic of my 9960 tomorrow. I spaced it today.

37Z · 04-27-2011, 12:53 PM

Can you clear engine codes?

TreeSemdyZee · 04-27-2011, 06:17 PM

9960 pic. Don't mind the dust.

68cam454 · 04-28-2011, 01:52 AM

Thanks for the pic!! It looks like it sticks out of the dash about the same amount that mine does. I was expecting it to be a lot more flush and when I asked the installer to move it back more, he said he couldn't because there wasn't enough clearance. I was hoping I could prove him wrong with a pic, but it looks like he may be right.

68cam454 · 04-28-2011, 01:53 AM

Quote:

Originally Posted by 37Z

Can you clear engine codes?

Supposedly you can, but I wont know unless I get a code.....hopefully not anytime soon.

MrHooke · 04-28-2011, 06:03 PM

Great photos man, I am still trying to decide on which headunit to go with. Thanks alot for sharing this though.

TreeSemdyZee · 04-28-2011, 07:36 PM

Quote:

Originally Posted by 68cam454

Thanks for the pic!! It looks like it sticks out of the dash about the same amount that mine does. I was expecting it to be a lot more flush and when I asked the installer to move it back more, he said he couldn't because there wasn't enough clearance. I was hoping I could prove him wrong with a pic, but it looks like he may be right.

No problem. Sometime in the next month, I'm going to be pulling out my console, so I'll take a look and see if there's any room to move it back. It wouldn't take much.

bigaudiofanat · 04-28-2011, 07:42 PM

Quote:

Originally Posted by 68cam454

Thanks for the pic!! It looks like it sticks out of the dash about the same amount that mine does. I was expecting it to be a lot more flush and when I asked the installer to move it back more, he said he couldn't because there wasn't enough clearance. I was hoping I could prove him wrong with a pic, but it looks like he may be right.

If you or your installer have enough patience you can drill new holes in the brackets and move it back some.

04-24-2011, 11:08 PM	#1 (permalink)
68cam454 Base Member Join Date: Dec 2010 Location: Portland Oregon Posts: 90 Drives: GM Nismo/68 454 Cam Rep Power: 14	Kenwood DNX9980 & Cameras Installed So I was just too damn busy to do the install myself (still have a lot of work on the Camaro to finish before the weather gets nice). I went to Car Toys and bought the first unit they got after haggling on price for a while. The install went well and I really like the HU and all the functionality that's built in. I was very pleasantly surprised by how well the voice recognition works. (I used a wallpaper law2004 posted as my background) IMG_4331 (Copy).JPG IMG_4336 (Copy).JPG IMG_4353 (Copy).JPG The Ecoroute function with the Garmin adapter gives you the ability to display info from the OBDII port although it is fairly slow in updating. IMG_4350 (Copy).JPG Some of the gauges don't always display a value for some reason and I have contacted Kenwood so they will look into it. If anyone else has this problem (see picture below), please respond and also let Kenwood tech support know about it since when I called I was the first person calling them with an issue on this unit.....it had only been released for 2 days. IMG_4348 (Copy).JPG I had them install the Kenwood CMOS300 as the backup camera and I also had them install a CMOS200 as a forward camera to keep me from ruining my front spoiler against parking curbs. They work amazingly well and all you have to do is press the voice button and say "front camera" or "rear camera" and they come up instantly. IMG_4399 (Copy) (2).jpg IMG_4333 (Copy).JPG The voice activation button was placed in what I believe to be the perfect position on the side of the console. IMG_4403.JPG They only thing I am not too thrilled about is how far the unit sticks out of the dash. I asked the installer if it could be moved into the dash further but he said there was enough room behind it to push it back further. I don't know if this is true or not and if anyone has side view pictures of a 9980 or 9960 installed, please post them. IMG_4338 (Copy).JPG Last edited by 68cam454; 04-25-2011 at 01:30 AM.

04-24-2011, 11:29 PM	#2 (permalink)
370zFORme!! Premium Member Join Date: Mar 2010 Location: SoCal Posts: 1,459 Drives: 2012 6MT STiffy Rep Power: 17	It can be pushed farther back trust I had the same issue and my installer was able to push it back farther but you need the metra dash kit. __________________ 87' Honda Civic Hatchback: Kaput @ 288,000 miles, 90' Toyota Celica: Kaput @ 175,000 miles, 93' Mitsubishi 3000GT VR4: Kaput @ 138,000 miles, 06' Scion Tc: Traded in @ 64,000 miles, 10' Nissan 370z: Traded in @ 25,000 miles, 12' Subaru Impreza Sti: Current.

04-25-2011, 01:48 AM	#3 (permalink)
747ifly Base Member Join Date: Feb 2011 Location: wilmington de Posts: 74 Drives: 10 Nissan 370Z CS M6 Rep Power: 14	The Ecoroute should be hot. Do you like it? I can't say how nice the cmos300 is for changing lanes while driving. The multi view is awesome. Good choice. __________________ 2010 aluminum 370Z coupe sport

04-27-2011, 12:53 PM	#9 (permalink)
37Z Enthusiast Member Join Date: Jun 2009 Location: Florida Posts: 476 Drives: 370Z MB 6M -sold Rep Power: 263	9980 EcoRoute Can you clear engine codes?

04-28-2011, 01:52 AM	#11 (permalink)
68cam454 Base Member Join Date: Dec 2010 Location: Portland Oregon Posts: 90 Drives: GM Nismo/68 454 Cam Rep Power: 14	Thanks for the pic!! It looks like it sticks out of the dash about the same amount that mine does. I was expecting it to be a lot more flush and when I asked the installer to move it back more, he said he couldn't because there wasn't enough clearance. I was hoping I could prove him wrong with a pic, but it looks like he may be right. Last edited by 68cam454; 04-28-2011 at 02:01 AM.

04-25-2011, 11:45 AM	#4 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,885 Drives: '09 370 & ‘14 Juke Rep Power: 27408	Awesome, I've got the 9960 and it sticks out a little. I would think to recess the unit farther, you would probably need to modify the mounting brackets a little. You'd have to make the holes oblong to move it back. It would be a whole lot easier to recess in the 370 than it was in my 350 due to the way the unit mounts.

04-26-2011, 07:13 PM	#6 (permalink)
37Z Enthusiast Member Join Date: Jun 2009 Location: Florida Posts: 476 Drives: 370Z MB 6M -sold Rep Power: 263	Just how slow it the engine interface? What other functions can it monitor?

04-26-2011, 11:13 PM	#8 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,885 Drives: '09 370 & ‘14 Juke Rep Power: 27408	I'll get you a pic of my 9960 tomorrow. I spaced it today.

04-27-2011, 06:17 PM	#10 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,885 Drives: '09 370 & ‘14 Juke Rep Power: 27408	9960 pic. Don't mind the dust.

04-28-2011, 06:03 PM	#13 (permalink)
MrHooke Base Member Join Date: Apr 2011 Location: Plantation, FL Posts: 11 Drives: 11 Nissan 370z Red M Rep Power: 14	Great photos man, I am still trying to decide on which headunit to go with. Thanks alot for sharing this though.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Kenwood DNX6140 installed in my 370Z with Sirius and back up Cam (AK370Z)	AK370Z	Audio & Video	308	10-25-2020 08:17 PM
X2 Cameras?	G Fo12ce	Audio & Video	13	10-03-2011 02:55 PM
My Kenwood 5140 installed (w/pictures)	KingZee	Audio & Video	4	03-07-2010 01:40 AM
Got Kenwood DNX6140 Installed	dcrew1x	Audio & Video	7	08-29-2009 08:54 PM
videos kenwood dnx6140 installed with pioneer rear view cam	dainedazz	Audio & Video	14	08-16-2009 05:40 PM