Adjusting crossover

Baer383

I have a Alpine pdx-5 with Polk db6501 in front and a 10in Ken wood sub.

I know that adjustment points are subjective but I'm looking for a good starting point for crossover for the sub and Polk db 6501 the tweeters are on Polk's passive crossovers also would it be a good idea to leave the 3db switch on the passive crossover for the tweeters in the middle or + - 3db.

Thanks

__________________
2013 ZL1

754 rwhp 747 rwtq

Juleous

100hz to start, I have mine set to 80hz.

Baer383

I was just down stairs and I had it at 110 then turned it down to 75-80 it sounds allot better b/c it is not drowning out the 6.5 in. speakers in the doors.

__________________
2013 ZL1

754 rwhp 747 rwtq

bigaudiofanat

Standard for a sub is LPF on 60-80hrz depending on what you like.

__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know
Direct email address reimermatt@gmail.com
Owner of: Dynamic Mobile Audio Follow me below
https://www.facebook.com/Dynamicmobileaudio/

Wicked CAS

Try playing different music when you are tuning it, if you play rock I am sure you can set the crossover o 50Hz but if you play Rap you will find the speakers will make exploding noises with heavy bass. you may want to set it to atleast 80-100 if playing Bass heavy songs.

If you have a head unit with a crossover adjustment, you can leave the crossover in the amp off. Use the crossover in the deck and you can adjust as needed per song or style of music you listen to..

__________________

www.wickedcas.com Call: 603-642-4222 E-mail: Wickedcas@aol.com
DIRECT AUTHORIZED DEALER FOR: AUDISON, HERTZ, JL AUDIO, JL AUDIO MARINE, KENWOOD EXCELON, COMPUSTAR, DIAMOND AUDIO, CACHE, ARC AUDIO, K40, PASSPORT ESCORT.