Firewall Run

jikhead · 02-07-2011, 08:14 PM

If you have a manual, you don't have or can't access that same grommet in the video. However, there is another one in the same spot on the passenger side. You just need to remove the battery, and use a sharp object or a long screwdriver (like guy above said to do) to poke through the firewall padding in the cabin. I also removed the grommet when I did this, and scored the grommet to start the cable feed thru it.

rarwz · 02-08-2011, 04:44 AM

Quote:

Originally Posted by jikhead

If you have a manual, you don't have or can't access that same grommet in the video. However, there is another one in the same spot on the passenger side. You just need to remove the battery, and use a sharp object or a long screwdriver (like guy above said to do) to poke through the firewall padding in the cabin. I also removed the grommet when I did this, and scored the grommet to start the cable feed thru it.

Yea, I am aware of the passenger side one, just looking for another driver side option.

bigaudiofanat · 02-09-2011, 06:51 AM

I would recommend just using the one on the passenger side as suggested much safer and will save time just run the wire once inside the cabin to the drivers side if needed.

02-09-2011, 06:51 AM	#3 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	I would recommend just using the one on the passenger side as suggested much safer and will save time just run the wire once inside the cabin to the drivers side if needed. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
where to pass thru the firewall	510z	Audio & Video	14	07-03-2010 10:33 AM

02-07-2011, 08:14 PM	#1 (permalink)
jikhead Enthusiast Member Join Date: Jun 2009 Location: Little Rock, AR Posts: 425 Drives: 09 370Z Blue 6spd Rep Power: 184	If you have a manual, you don't have or can't access that same grommet in the video. However, there is another one in the same spot on the passenger side. You just need to remove the battery, and use a sharp object or a long screwdriver (like guy above said to do) to poke through the firewall padding in the cabin. I also removed the grommet when I did this, and scored the grommet to start the cable feed thru it.