Pioneer AVH-3200 - need a dash kit?

370z2k10 · 01-13-2011, 05:57 PM

A question for those who have installed the Pioneer AVH-3200 to replace their non bose factory set-up.

Did anyone need a dask kit or is it a clean, stock looking install with just the head unit attached to the factory bracket (just swapping head units)?

bigaudiofanat · 01-13-2011, 06:11 PM

Kit needed:

Pioneers YES

Kenwoods MAYBE

370z2k10 · 01-13-2011, 06:16 PM

What kit...a metra?

chops · 01-13-2011, 06:16 PM

i had a base radio, and i currently have a pioneer x920bt. i considered purchasing a dash kit, but after fitting it in with the stock dash i actually dont mind the minor gap. it looks bad in pictures thanks to the flash lighting it up, but in person i actually dont see it as a problem. saved myself 40bucks there too

370z2k10 · 01-13-2011, 06:21 PM

Chops, did it mount right to your factory bracket?

bigaudiofanat · 01-13-2011, 06:25 PM

Mounts right to the bracket and yes either the metra or the other one will do they will get rid of the gap.

370z2k10 · 01-15-2011, 09:48 AM

I'm starting the install right now...Pioneer AVH 3200head unit, polk db5501's and a metra axxess controller (looks like the hardest part)

Wish me luck!

370z2k10 · 01-15-2011, 01:43 PM

Ok, got everything apart (PITA!)

How do I identify the audio output wires from the factory wiring harness that lead to the female part of the door molex?

Do I need to cut these from the female part of the door molex to hook into the input on my crossover?

I'm stuck...Help!?

370z2k10 · 01-15-2011, 02:38 PM

And how the *&^$&%^#$&# do you run the new speaker wire through the door molex?? It gets caught on the rubber housing, I can't get more than about three inches through.

Holy crap this is frustrating.

37Z · 01-15-2011, 02:58 PM

Quote:

Originally Posted by 370z2k10

And how the *&^$&%^#$&# do you run the new speaker wire through the door molex?? It gets caught on the rubber housing, I can't get more than about three inches through.

Holy crap this is frustrating.

Watch SlikNik's video located in the Audio section (see install video sticky)

370z2k10 · 01-15-2011, 04:10 PM

Did that, but thanks, I figured it out

NYBladeZ · 01-18-2011, 09:35 AM

noob question, you won't need a small amp to power the speakers?

kenchan · 01-18-2011, 10:44 AM

? the HU has an internal amp so you can use that, or use the line-outs and use an external amp to power your speakers. for the most part, i think most people will be happy with just using the HU's amp unless you're a stereophile kinda guy for cars.

01-13-2011, 05:57 PM	#1 (permalink)
370z2k10 Base Member Join Date: Aug 2010 Location: Tampa Bay Posts: 129 Drives: '13 Z Gun Metallic Rep Power: 15	Pioneer AVH-3200 - need a dash kit? A question for those who have installed the Pioneer AVH-3200 to replace their non bose factory set-up. Did anyone need a dask kit or is it a clean, stock looking install with just the head unit attached to the factory bracket (just swapping head units)?

01-13-2011, 06:11 PM	#2 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Kit needed: Pioneers YES Kenwoods MAYBE __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

01-13-2011, 06:25 PM	#6 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Mounts right to the bracket and yes either the metra or the other one will do they will get rid of the gap. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

01-18-2011, 09:35 AM	#12 (permalink)
NYBladeZ A True Z Fanatic Join Date: Apr 2009 Location: New York Posts: 2,158 Drives: Lotus Exige S Rep Power: 20	noob question, you won't need a small amp to power the speakers? __________________ 2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold 2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pioneer HU & PAC SWI-PS	azIce	Audio & Video	2	12-28-2010 10:18 AM
FOR SALE - Pioneer CD Player, Polk DB, Dash Kit, Wiring	mdbrich	Parts for sale (Private Classifieds)	4	12-15-2010 07:57 AM
Pioneer avic-u310bt/dash kit/wiring harness	pge27	Parts for sale (Private Classifieds)	1	11-04-2010 12:06 PM
Pioneer AVIC-z120BT Do I need a dash kit	Flyboy	Audio & Video	19	08-04-2010 08:22 AM
DONE With Pioneer	bigaudiofanat	Audio & Video	47	09-20-2009 10:34 PM

01-13-2011, 06:16 PM	#3 (permalink)
370z2k10 Base Member Join Date: Aug 2010 Location: Tampa Bay Posts: 129 Drives: '13 Z Gun Metallic Rep Power: 15	What kit...a metra?

01-13-2011, 06:16 PM	#4 (permalink)
chops A True Z Fanatic Join Date: Oct 2010 Location: NA Posts: 1,732 Drives: NA Rep Power: 22	i had a base radio, and i currently have a pioneer x920bt. i considered purchasing a dash kit, but after fitting it in with the stock dash i actually dont mind the minor gap. it looks bad in pictures thanks to the flash lighting it up, but in person i actually dont see it as a problem. saved myself 40bucks there too

01-13-2011, 06:21 PM	#5 (permalink)
370z2k10 Base Member Join Date: Aug 2010 Location: Tampa Bay Posts: 129 Drives: '13 Z Gun Metallic Rep Power: 15	Chops, did it mount right to your factory bracket?

01-15-2011, 09:48 AM	#7 (permalink)
370z2k10 Base Member Join Date: Aug 2010 Location: Tampa Bay Posts: 129 Drives: '13 Z Gun Metallic Rep Power: 15	I'm starting the install right now...Pioneer AVH 3200head unit, polk db5501's and a metra axxess controller (looks like the hardest part) Wish me luck!

01-15-2011, 01:43 PM	#8 (permalink)
370z2k10 Base Member Join Date: Aug 2010 Location: Tampa Bay Posts: 129 Drives: '13 Z Gun Metallic Rep Power: 15	Ok, got everything apart (PITA!) How do I identify the audio output wires from the factory wiring harness that lead to the female part of the door molex? Do I need to cut these from the female part of the door molex to hook into the input on my crossover? I'm stuck...Help!?

01-15-2011, 02:38 PM	#9 (permalink)
370z2k10 Base Member Join Date: Aug 2010 Location: Tampa Bay Posts: 129 Drives: '13 Z Gun Metallic Rep Power: 15	And how the *&^$&%^#$&# do you run the new speaker wire through the door molex?? It gets caught on the rubber housing, I can't get more than about three inches through. Holy crap this is frustrating.

01-15-2011, 04:10 PM	#11 (permalink)
370z2k10 Base Member Join Date: Aug 2010 Location: Tampa Bay Posts: 129 Drives: '13 Z Gun Metallic Rep Power: 15	Did that, but thanks, I figured it out

01-18-2011, 10:44 AM	#13 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	? the HU has an internal amp so you can use that, or use the line-outs and use an external amp to power your speakers. for the most part, i think most people will be happy with just using the HU's amp unless you're a stereophile kinda guy for cars.