Pioneer HU & PAC SWI-PS

azIce · 12-27-2010, 11:27 AM

I have an AVH-P4200DVD installed with the PAC SWI-PS and the only control I do not have is my radio presets. The instructions for the PAC say some HUs may not have this available. So, I am wondering if anyone has this specific setup or any Pioneer HU and not have preset controls.

I reset and re-programmed the PAC several times with no success. I just want to see if anyone else out there has this issue.

It's not a deal breaker by any means, but it does seem basic that this works.

TreeSemdyZee · 12-27-2010, 11:01 PM

I know on my Kenwood unit, to control the presets, I have to change a setting on the HU. It has "Auto1, Auto2 and Manual" scan modes. I think I have it set to Auto2 to use the presets. If I'm remembering correctly, Auto1 is basically scan and Manual just goes to the next available station. I don't know if the same thing is true for the Pioneer.

When you use the up and down button on the steering wheel, does anything happen?

azIce · 12-28-2010, 11:18 AM

It tunes one step at a time. If I hold it, it seeks.

12-27-2010, 11:27 AM	#1 (permalink)
azIce Base Member Join Date: Dec 2010 Location: Phoenix, AZ Posts: 23 Drives: 2010 370Z Rep Power: 14	Pioneer HU & PAC SWI-PS I have an AVH-P4200DVD installed with the PAC SWI-PS and the only control I do not have is my radio presets. The instructions for the PAC say some HUs may not have this available. So, I am wondering if anyone has this specific setup or any Pioneer HU and not have preset controls. I reset and re-programmed the PAC several times with no success. I just want to see if anyone else out there has this issue. It's not a deal breaker by any means, but it does seem basic that this works.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pioneer x920bt	JayYoon	Audio & Video	0	12-25-2010 08:37 PM
Pioneer Navigation Unit	Joe21	Audio & Video	57	07-19-2010 08:44 AM
Pioneer AVIC-Z110BT	vpn2001	Audio & Video	20	04-17-2010 11:36 AM
Thinking about pioneer	370z TT	Audio & Video	28	04-04-2010 06:50 PM
DONE With Pioneer	bigaudiofanat	Audio & Video	47	09-20-2009 11:34 PM

12-27-2010, 11:01 PM	#2 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,885 Drives: '09 370 & ‘14 Juke Rep Power: 27408	I know on my Kenwood unit, to control the presets, I have to change a setting on the HU. It has "Auto1, Auto2 and Manual" scan modes. I think I have it set to Auto2 to use the presets. If I'm remembering correctly, Auto1 is basically scan and Manual just goes to the next available station. I don't know if the same thing is true for the Pioneer. When you use the up and down button on the steering wheel, does anything happen?

12-28-2010, 11:18 AM	#3 (permalink)
azIce Base Member Join Date: Dec 2010 Location: Phoenix, AZ Posts: 23 Drives: 2010 370Z Rep Power: 14	It tunes one step at a time. If I hold it, it seeks.