DIY Sub Enclosure

chemi19 · 10-24-2010, 11:31 PM

So I have started building my own sub enclosure what do you guys think?

This is my first project ever on any car audio so any feedback or suggestions are greatly appreciated.

The pictures below will show you my template/prototype. I will scan it and use autocad to send it to the CNC at work and it should be an easy task from there on. Once I get it cut on the CNC and work out a template that works if anyone wants it let me know.

One more thing. I Think the recommended material is 3/4" MDF but would 3/4" lightweight MDF work also?

pg6speed · 10-25-2010, 01:02 PM

Light weight MDF will work.

CNC is a bit of an over kill as you can cut all those peices with a table saw and jig saw but, if you have access to a CNC then and you want to take the time then why not.

Congrats on building your own box.

chemi19 · 10-25-2010, 01:55 PM

I would only be cutting the front face with a CNC as its much easier for me to draw and click a button than to cut it by hand. Also if I decide to change my sub later on it will be a breeze to change that front panel.

10-25-2010, 01:02 PM	#2 (permalink)
pg6speed Base Member Join Date: Jul 2009 Location: San Antonio Posts: 223 Drives: 10 Armada Rep Power: 16	Light weight MDF will work. CNC is a bit of an over kill as you can cut all those peices with a table saw and jig saw but, if you have access to a CNC then and you want to take the time then why not. Congrats on building your own box. __________________ STILLEN G3 / F.I. TDX (NO RESONATORS) / F.I. LTH / UpRev Tuned / BC-Racing ER Coilovers / DIY Oil Cooler / Short Shifter

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ported Enclosure	MindFusion FX	ZEnclosures	9	09-25-2012 02:14 PM
space tire sub enclosure	37Z	ZEnclosures	7	03-09-2012 01:14 PM
Mounting woofer to enclosure.	tbonesteak	Audio & Video	3	03-19-2010 03:56 PM
JL 13TW5 custom suybwoofer enclosure	2fast4thelaw	Audio & Video	13	09-03-2009 05:50 PM
Custom Sub Enclosure - 370z KY owners	customboxman	Nissan 370Z General Discussions	40	04-06-2009 06:37 PM

10-25-2010, 01:55 PM	#3 (permalink)
chemi19 Base Member Join Date: Oct 2010 Location: Florida Posts: 38 Drives: 2010 370Z PG M6 Rep Power: 15	I would only be cutting the front face with a CNC as its much easier for me to draw and click a button than to cut it by hand. Also if I decide to change my sub later on it will be a breeze to change that front panel.