Get the Axxess ASWC working - All buttons

tjlazer · 06-17-2012, 03:55 PM

Quote:

Originally Posted by bigaudiofanat

Yes cut the wire and ground it. Through the stock head unit it was grounded however with the new head unit that pin does not go to anything.

So you have to ground this wire on the vehicle side of the harness? Or can you ground it on the aftermarket harness? I noticed mine has two ground leads off the black ground wire.

bigaudiofanat · 06-17-2012, 06:56 PM

Quote:

Originally Posted by tjlazer

So you have to ground this wire on the vehicle side of the harness? Or can you ground it on the aftermarket harness? I noticed mine has two ground leads off the black ground wire.

It can be grounded at the same place your head unit is being grounded to.

The black wire in your metra harness is only for Subaru vehicles, in a nissan you have to make your own ground location.

tjlazer · 06-17-2012, 07:50 PM

Quote:

Originally Posted by bigaudiofanat

It can be grounded at the same place your head unit is being grounded to.

The black wire in your metra harness is only for Subaru vehicles, in a nissan you have to make your own ground location.

Thanks, also do just tap into the red wire on my new harness from the Axxess harness?

nurseryboy · 08-15-2012, 06:47 PM

I'm only able to get the volume buttons working with my new KW-NT800HDT. I posted the full details in this post. Anyone have any suggestions?

11Thumper · 08-16-2012, 03:31 PM

Quote:

Originally Posted by nurseryboy

I'm only able to get the volume buttons working with my new KW-NT800HDT. I posted the full details in this post. Anyone have any suggestions?

Same here. Tried multiple times. Very frustrating.

Dustyboy · 10-22-2012, 04:02 AM

I did the auto program function and only the volume buttons worked. The instruction booklet outlines how to program manually. Its a couple pages of drole instructions but only takes about 5 mins (if that) to complete. All buttons functioning now.

Dustyboy · 10-23-2012, 08:31 AM

I programmed it after installing the new HU, but before I put all the dash panels back on, that way I could pull out the black box unit and see the red lights as well as reset the device. I had the ignition on, and the radio going so I could see/hear the volume going up/down etc.

tjlazer · 10-23-2012, 03:45 PM

If you guys get random button pushes you will need to update the firmware of the black box. I just did that and all is working 100% now!

djpheer · 11-14-2012, 09:18 AM

Just an update for anyone intimidated by this install. Once it is all wired, the "manual programming" takes all of about 2 minutes. Just follow the step by step instructions that you can get from axxess the website. Don't worry, there are no specific instructions for 370zs. Just start by holding down the reset button for 10 seconds and follow the steps under manual programming. It's very simple.

Gizsmo0 · 11-29-2012, 12:57 AM

Just to clarify the Car side plug number 15 has to be grounded since it doesn't go to anything on the metra plug grounding just on the aftermarket plug will not work the oem plug 15 also has to be grounded. This drove me crazy

tjlazer · 12-01-2012, 01:11 PM

^ yes! What a pita! I was like ahhhhh.

HArturo319 · 12-11-2012, 03:14 PM

Quick question... I haven't looked at the vehicle users manual, but I assume that the 2012 and 2013 model wiring configuration hasn't changed therefore tapping the Metra Axxess harness as you have all stated should work just fine?

ga0887 · 01-09-2013, 12:18 AM

Quote:

Originally Posted by chops

question to those who got this working. with my pioneer x920bt i cannot get the up and down buttons to program preset up/down. when i use these buttons all i get is tuner up/down and seek up/down if i hold the buttons. is this a limitation of the axxess?

I am having this same issue, any one resolve this?

I've considered manually reprogramming the axxess and skipping the "seek" functions and programming these as "track up/down" (If you've manually programmed one of these units I'm hoping you know what I am referring to).

Just wanted to hear other member's experience before I take apart the dash (again)..

P-Kidd · 01-30-2013, 03:42 PM

Anyone have any luck getting it to work with a 2013 Base. Frustrated.... I used the blue and pink wire. Separate ground for pin 15.

redline10000 · 04-15-2013, 02:08 PM

Just did this today and it worked first time with the auto program. All I did was update the unit via my PC before installing.

10-23-2012, 03:45 PM	#38 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 20	If you guys get random button pushes you will need to update the firmware of the black box. I just did that and all is working 100% now! __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV Last edited by tjlazer; 11-19-2012 at 03:27 PM.

12-01-2012, 01:11 PM	#41 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 20	^ yes! What a pita! I was like ahhhhh. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

12-11-2012, 03:14 PM	#42 (permalink)
HArturo319 Enthusiast Member Join Date: Jun 2012 Location: Houston, TX Posts: 323 Drives: 2013 PW NISMO Rep Power: 13	Quick question... I haven't looked at the vehicle users manual, but I assume that the 2012 and 2013 model wiring configuration hasn't changed therefore tapping the Metra Axxess harness as you have all stated should work just fine? __________________ Me And Zoloft Get Along Just Fine

01-30-2013, 03:42 PM	#44 (permalink)
P-Kidd Base Member Join Date: Jan 2013 Location: Olive Branch, MS Posts: 34 Drives: 2013 370Z Rep Power: 12	Anyone have any luck getting it to work with a 2013 Base. Frustrated.... I used the blue and pink wire. Separate ground for pin 15. __________________ Pioneer AVH 4500, Pioneer TS 6.5 Comp,2-8in JBL Subs, "old school" Punch 200, 20% Lumar Tint. The first step to forgiveness is revenge

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Axxess ASWC wiring.	Z33knight	Audio & Video	16	12-19-2019 12:54 PM
axxess module.	jayl	Mid-Atlantic Region	6	07-30-2012 11:23 AM
Anyone get the Axxess ASWC to work properly?	DeEePiDDy	Audio & Video	8	08-23-2010 09:09 PM
Kenwood DDX812 + 370Z kit, ASWC, iPod cable.	Z33knight	Parts for sale (Private Classifieds)	11	08-15-2010 02:54 PM
metra axxess aswc not working	jayl	Audio & Video	8	06-27-2010 12:50 AM

08-15-2012, 06:47 PM	#34 (permalink)
nurseryboy Base Member Join Date: May 2010 Location: OBX NC Posts: 123 Drives: 09 BMW 135i Rep Power: 15	I'm only able to get the volume buttons working with my new KW-NT800HDT. I posted the full details in this post. Anyone have any suggestions?

10-22-2012, 04:02 AM	#36 (permalink)
Dustyboy Base Member Join Date: Oct 2012 Location: Oregon Posts: 12 Drives: 2013 Nissan 370z Rep Power: 13	I did the auto program function and only the volume buttons worked. The instruction booklet outlines how to program manually. Its a couple pages of drole instructions but only takes about 5 mins (if that) to complete. All buttons functioning now.

10-23-2012, 08:31 AM	#37 (permalink)
Dustyboy Base Member Join Date: Oct 2012 Location: Oregon Posts: 12 Drives: 2013 Nissan 370z Rep Power: 13	I programmed it after installing the new HU, but before I put all the dash panels back on, that way I could pull out the black box unit and see the red lights as well as reset the device. I had the ignition on, and the radio going so I could see/hear the volume going up/down etc.

11-14-2012, 09:18 AM	#39 (permalink)
djpheer Base Member Join Date: Dec 2009 Location: Louisiana Posts: 75 Drives: 2009 Nissan 370z Rep Power: 16	Just an update for anyone intimidated by this install. Once it is all wired, the "manual programming" takes all of about 2 minutes. Just follow the step by step instructions that you can get from axxess the website. Don't worry, there are no specific instructions for 370zs. Just start by holding down the reset button for 10 seconds and follow the steps under manual programming. It's very simple.

11-29-2012, 12:57 AM	#40 (permalink)
Gizsmo0 Base Member Join Date: Nov 2012 Location: Granbury Texas Posts: 10 Drives: 2013 370Z m6 Rep Power: 13	Just to clarify the Car side plug number 15 has to be grounded since it doesn't go to anything on the metra plug grounding just on the aftermarket plug will not work the oem plug 15 also has to be grounded. This drove me crazy

04-15-2013, 02:08 PM	#45 (permalink)
redline10000 Enthusiast Member Join Date: Nov 2012 Location: boston Posts: 265 Drives: 2011 370z sport Rep Power: 13	Just did this today and it worked first time with the auto program. All I did was update the unit via my PC before installing.