Project SQL Setup in Docaam's Z

docaam · 08-17-2010, 02:08 AM

Hello Everyone, Myself and my sponsor (for Subs, amps and installation) are currently working the 370Z and looking forward to create a subtle yet unique setup in the Z.

The pictures can speak volume so I would rather stick to pictures than explanation.

The setup should be as follows as few things might change based on the job.

Head unit : Kenwood DNX5360
Accessories: Kenwood Bluetooth
Kenwood Reverse Camera
PAC SWI JACK - Steering wheel Integration

Speakers : Kicker KS 60.2 Front component speakers
Alpine Seperates rear speakers

Amplifiers : Swiss Audio Elite series E640.4 (4 Channel for the speakers)
Swiss Audio Elite series E1200.1 (Mono Block for the sub 1)
Swiss Audio Elite series E1200.1 (Mono Block for the sub 2)

Sub woofer: Swiss Audio SPL1291L x 2 (1000W RMS, 12 inch SPL Subwoofer)

Accessories: Kicker PKD1 (1/0AWG dual amplifier power wire kit)
Kicker Fuse Block x 4
Kicker Distribution Block x 2

Sound proofing: Skematix Vibramat sound tiles

Those are some the items I called of my head.

Writing down the job card, it went more than 40 jobs. So I stopped.

Thank you for listening and watching. We hope to complete this project clean and soon.

Now some teaser Pics before we start....

Some of the items that might go into this project

As you all know this where we have to put all of the above.. or atleast almost all...

Some try outs and orientation.... hmmm... where is the space for 2 x 12 inch subs?

Dig for the actual space... and more try outs.

Finally panels are coming off.

docaam · 08-17-2010, 02:19 AM

Factory HU vs Kenwood

Forgot to mention that the system will pull around 200Amperes at full load. This based on the fuse ratings of the amplifiers. This means 4AWG or even our special 25mm2 thick power wires wont be enough. Thus we upgraded to Kicker 1/0 AWG power wire kit which can handle upto 3000W system.

Those wires are really thick and extremely flexible.

This would also mean the big 3 upgrade in car audio should be performed

Add thicker Ground wire from battery to the chassis
Add thicker ground wire from engine to chassis
Add thicker power wire from Alternator to battery positive terminal.

Fortunately we noted that nissan has already installed 1/0 AWG wires for the alternator but total skipped on battery wires.

So we upgraded the negative battery terminal and added the 1/0 AWG wires for the body from the battery and 25mmsq (3 awg) wires from engine to body.

This is more like a grounding kit you would you for electrical improvements.

The engine compartment.

The 1/0 AWG wire as the negative terminal to body.

The 1/0 AWG wire, 25mmsq wire and Kicker battery terminal

Heavy duty soldering and insulation

This is where the negative wire would be mounted

Sand paper and elbow grease

Kicker battery terminal

docaam · 08-17-2010, 02:26 AM

Ground upgrade - 25mmsq wire fastened to engine block.

Kicker Fuse block installed in easy to reach location. Also within 16inches from battery. (A requirement in safety and competition regulations)

Main positive wire routed with factory finish.

Ground connected to the new negative terminal

Battery ground and engine ground connected to the same spot

Positive 1/0 AWG connected to battery terminal

RCAs behind the HU is ready to be connected.

[img]RCAs, speaker wire and power wires routed seperately.

Speaker wire routed through factory connectors

The trunk ready for sound proofing after everything has been removed.

The door and soundproofing

Factory speakers and Kicker KS60.2

MDF ring to door speakers

More to come....

Jamaica · 08-17-2010, 03:25 AM

Looks good my friend

TreeSemdyZee · 08-17-2010, 06:23 AM

Nice.
One minor recommendation unless you've already installed it. I'd go with the Metra Axxess ASWC instead of the PAC unit. It's a lot faster, doesn't use resistors and is a much sturdier unit. I've used both and hated the PAC.

docaam · 08-17-2010, 08:06 AM

thanks jamaica

man I have already got the PAC, I know its slow but thats the only thing we can get it in dubai and dont want to wait for 2 weeks to get it shipped from US

kenchan · 08-17-2010, 09:25 AM

"subtle" usually means swapping out a HU and maybe a rearview camra, but man you guys have different definition of "subtle" out there in dubai.

looks like a fun project!

big- any comments from your end?

docaam · 08-17-2010, 09:42 AM

Quote:

Originally Posted by kenchan

"subtle" usually means swapping out a HU and maybe a rearview camra, but man you guys have different definition of "subtle" out there in dubai.

looks like a fun project!

big- any comments from your end?

I am just copying this thread from a local forum and my installer is posting it there...for him its subtle as compared to what he usually do, but see when it finished by this sunday, everything is hidden under the trunk mat so maybe thats what he might be thinking...

bigaudiofanat · 08-17-2010, 09:52 AM

Never liked over kill when it comes to bass. But the owner will be happy with how loud that gets, might even want to do ported for even more bass.

docaam · 08-17-2010, 11:46 AM

Im not a loud base person might just run those woofers on lowest setting possible, but more of helping a friend to promote his business

docaam · 08-18-2010, 02:07 AM

Quote from my installer LOl

Quote:

Nissan I am sorry so say this, the door pads in the Z are terrible. I can understand the weight reduction, but this is too much.

As you all can see I barely laid 1 layer on the door and 1 inside the pad with closed cell foam. Honestly another 2 hours were spend to remove some of them. And even more time to fix the door.

This is not good as it will not help much in reducing road noise.
The door pads are flimsy and mounted using only crappy plastic locks except for three screws in the middle. These locks wont go in if there is as much as a thin paper in between them.

Now for few more pictures

The door pads were re trimmed to ensure fitment.... NISSAAANNN....

Right side door completed

Rings sealed using foam to have the perfect fitment

On the Door

Done deal

Factory tweeter on the right and Kicker tweeters with custom frame to be installed in factory location.

Initial plan on box size.

Wood work!!! The Sub box first on 18mm MDF

Test Fitment...

Laying down the Skematics dampening mat on the floor.
Trunk partially completed.

Jamaica · 08-18-2010, 03:32 AM

immm waiting man...hurry up already damn lol

docaam · 08-18-2010, 10:20 AM

Quote:

Originally Posted by jamaica951

immm waiting man...hurry up already damn lol

LOL...im posting as my installer is posting on our local forum...the pics posted today were taken last night during the job being going on...im hoping to get the car on sunday or monday max

bigaudiofanat · 08-18-2010, 12:15 PM

I would say sunday depending on how many people are working on it and if he runs into problems.

docaam · 08-18-2010, 12:41 PM

There are two guys but the main work is done by himself...and he is a part timer as well so work starts in the evening only

08-17-2010, 02:08 AM	#1 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 28	Project SQL Setup in Docaam's Z Hello Everyone, Myself and my sponsor (for Subs, amps and installation) are currently working the 370Z and looking forward to create a subtle yet unique setup in the Z. The pictures can speak volume so I would rather stick to pictures than explanation. The setup should be as follows as few things might change based on the job. Head unit : Kenwood DNX5360 Accessories: Kenwood Bluetooth Kenwood Reverse Camera PAC SWI JACK - Steering wheel Integration Speakers : Kicker KS 60.2 Front component speakers Alpine Seperates rear speakers Amplifiers : Swiss Audio Elite series E640.4 (4 Channel for the speakers) Swiss Audio Elite series E1200.1 (Mono Block for the sub 1) Swiss Audio Elite series E1200.1 (Mono Block for the sub 2) Sub woofer: Swiss Audio SPL1291L x 2 (1000W RMS, 12 inch SPL Subwoofer) Accessories: Kicker PKD1 (1/0AWG dual amplifier power wire kit) Kicker Fuse Block x 4 Kicker Distribution Block x 2 Sound proofing: Skematix Vibramat sound tiles Those are some the items I called of my head. Writing down the job card, it went more than 40 jobs. So I stopped. Thank you for listening and watching. We hope to complete this project clean and soon. Now some teaser Pics before we start.... Some of the items that might go into this project As you all know this where we have to put all of the above.. or atleast almost all... Some try outs and orientation.... hmmm... where is the space for 2 x 12 inch subs? Dig for the actual space... and more try outs. Finally panels are coming off. __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

08-17-2010, 02:19 AM	#2 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 28	Factory HU vs Kenwood Forgot to mention that the system will pull around 200Amperes at full load. This based on the fuse ratings of the amplifiers. This means 4AWG or even our special 25mm2 thick power wires wont be enough. Thus we upgraded to Kicker 1/0 AWG power wire kit which can handle upto 3000W system. Those wires are really thick and extremely flexible. This would also mean the big 3 upgrade in car audio should be performed Add thicker Ground wire from battery to the chassis Add thicker ground wire from engine to chassis Add thicker power wire from Alternator to battery positive terminal. Fortunately we noted that nissan has already installed 1/0 AWG wires for the alternator but total skipped on battery wires. So we upgraded the negative battery terminal and added the 1/0 AWG wires for the body from the battery and 25mmsq (3 awg) wires from engine to body. This is more like a grounding kit you would you for electrical improvements. The engine compartment. The 1/0 AWG wire as the negative terminal to body. The 1/0 AWG wire, 25mmsq wire and Kicker battery terminal Heavy duty soldering and insulation This is where the negative wire would be mounted Sand paper and elbow grease Kicker battery terminal __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

08-17-2010, 02:26 AM	#3 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 28	Ground upgrade - 25mmsq wire fastened to engine block. Kicker Fuse block installed in easy to reach location. Also within 16inches from battery. (A requirement in safety and competition regulations) Main positive wire routed with factory finish. Ground connected to the new negative terminal Battery ground and engine ground connected to the same spot Positive 1/0 AWG connected to battery terminal RCAs behind the HU is ready to be connected. [img]RCAs, speaker wire and power wires routed seperately. Speaker wire routed through factory connectors The trunk ready for sound proofing after everything has been removed. The door and soundproofing Factory speakers and Kicker KS60.2 MDF ring to door speakers More to come.... __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

08-17-2010, 08:06 AM	#6 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 28	thanks jamaica man I have already got the PAC, I know its slow but thats the only thing we can get it in dubai and dont want to wait for 2 weeks to get it shipped from US __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

08-17-2010, 09:52 AM	#9 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Never liked over kill when it comes to bass. But the owner will be happy with how loud that gets, might even want to do ported for even more bass. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

08-17-2010, 03:25 AM	#4 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	Looks good my friend

08-17-2010, 06:23 AM	#5 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,885 Drives: '09 370 & ‘14 Juke Rep Power: 27408	Nice. One minor recommendation unless you've already installed it. I'd go with the Metra Axxess ASWC instead of the PAC unit. It's a lot faster, doesn't use resistors and is a much sturdier unit. I've used both and hated the PAC.

08-17-2010, 09:25 AM	#7 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	"subtle" usually means swapping out a HU and maybe a rearview camra, but man you guys have different definition of "subtle" out there in dubai. looks like a fun project! big- any comments from your end?

08-17-2010, 11:46 AM	#10 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 28	Im not a loud base person might just run those woofers on lowest setting possible, but more of helping a friend to promote his business __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

08-18-2010, 03:32 AM	#12 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	immm waiting man...hurry up already damn lol

08-18-2010, 12:15 PM	#14 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	I would say sunday depending on how many people are working on it and if he runs into problems. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

08-18-2010, 12:41 PM	#15 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 28	There are two guys but the main work is done by himself...and he is a part timer as well so work starts in the evening only __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Docaam's Z Journal	docaam	Member's 370Z Gallery	855	04-29-2016 05:34 PM
What is the best setup for......	kgreen	Audio & Video	20	03-11-2010 05:20 PM
Please judge this setup...	xbigb4ller69z	Wheels & Tires	20	03-10-2010 05:01 PM
Is this setup OK?	Graybullet	Audio & Video	24	09-08-2009 01:29 PM
This is the setup.....	BoostedMKIV	Wheels & Tires	11	03-09-2009 10:48 PM