Axxes install

F1loco · 08-02-2010, 12:32 PM

Guess I will pull the unit this weekend and try to run a manual program b/f spending $50 on a cable to update it....I've really only got volume up/down, source, and select up/down on my steering control anyway....

jayl · 08-16-2010, 01:02 PM

Hey F1loco,

I had the same issues. I called their support and the guy asked me to use 120k ohm resistor during programming... since kenwood is bought by JVC blah blah

I used that and the volume up/down worked but nothing else so I decided to do the firmware update... did that yesterday and now i will have to reprogram using the resistors...

How did you get track / source to work?

Thanks,
jay

F1loco · 08-16-2010, 02:02 PM

Got to find time on a weekend to pull the HU out and get to the AXXES and try manual programming. Auto will only do the volume w/o any updates. I was hoping to just manually run through all the settings w/o the need of updating firmware...let me know how it goes with the updated software and if you have to still manually program or use the resistor...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HFC install	g96818	Hawaii	30	08-11-2013 10:39 AM
California Install	bigaudiofanat	Audio & Video	72	09-02-2010 01:01 PM
Help with My Install	LinPark	Audio & Video	15	08-08-2010 08:28 AM
can anyone install my hfc	thegraylady	Intake/Exhaust	6	04-16-2010 10:46 AM
exhaust install in SF?	vortrex	Northern California Region	7	12-30-2009 10:18 PM

08-02-2010, 12:32 PM	#1 (permalink)
F1loco Base Member Join Date: Jul 2010 Location: Sunshine Posts: 203 Drives: 09 Nismo Rep Power: 15	Guess I will pull the unit this weekend and try to run a manual program b/f spending $50 on a cable to update it....I've really only got volume up/down, source, and select up/down on my steering control anyway....

08-16-2010, 01:02 PM	#2 (permalink)
jayl Track Member Join Date: Jun 2010 Location: md Posts: 813 Drives: 09 370z base MT Rep Power: 16	Hey F1loco, I had the same issues. I called their support and the guy asked me to use 120k ohm resistor during programming... since kenwood is bought by JVC blah blah I used that and the volume up/down worked but nothing else so I decided to do the firmware update... did that yesterday and now i will have to reprogram using the resistors... How did you get track / source to work? Thanks, jay

08-16-2010, 02:02 PM	#3 (permalink)
F1loco Base Member Join Date: Jul 2010 Location: Sunshine Posts: 203 Drives: 09 Nismo Rep Power: 15	Got to find time on a weekend to pull the HU out and get to the AXXES and try manual programming. Auto will only do the volume w/o any updates. I was hoping to just manually run through all the settings w/o the need of updating firmware...let me know how it goes with the updated software and if you have to still manually program or use the resistor...