How to Modify the 70-7552 Connector?

LinPark · 07-09-2010, 06:33 PM

I'm going to install an aftermarket HU and want to keep my steering wheel controls - I have the Metra Axxess and it requires that I tap into 2 of the factory harness wires and then ground another. The holes in the 70-7552 that match up to these 3 wires seem to be empty right now. So, my question is rather than tap into the factory harness wires could I buy some molex pins and then actually add the wires into the 70-7552 connector? Seems doable to me but I'm not sure which size molex pins to order and how easy/difficult it is to slam them into the plug. Anyone tried this and can provide advice or links to the hardware I need to get?

Thanks!

Zuppy51 · 07-12-2010, 06:01 PM

I don't see why not, you can get them here:Molex 18-22 Gauge Pins .093" 10 Pair | Parts-Express.com

Molex 18-22 Gauge Pins .093" 10 Pair

They just clip right in, you may have to use a small pick or screw driver to push them in till they clip in place.

BTW, I use these all the time, they are awesome and they don't harm your factory wires:
Posi-Taps:

http://www.posi-lock.com/posiplug.html

07-09-2010, 06:33 PM	#1 (permalink)
LinPark A True Z Fanatic Join Date: Jan 2010 Location: Columbus, OH Posts: 1,077 Drives: '17 Camaro 2SS A8 Rep Power: 23	How to Modify the 70-7552 Connector? I'm going to install an aftermarket HU and want to keep my steering wheel controls - I have the Metra Axxess and it requires that I tap into 2 of the factory harness wires and then ground another. The holes in the 70-7552 that match up to these 3 wires seem to be empty right now. So, my question is rather than tap into the factory harness wires could I buy some molex pins and then actually add the wires into the 70-7552 connector? Seems doable to me but I'm not sure which size molex pins to order and how easy/difficult it is to slam them into the plug. Anyone tried this and can provide advice or links to the hardware I need to get? Thanks!

07-12-2010, 06:01 PM	#2 (permalink)
Zuppy51 Base Member Join Date: May 2010 Location: SF Bay Area Posts: 95 Drives: 2010 PG Nismo #414 Rep Power: 15	I don't see why not, you can get them here:Molex 18-22 Gauge Pins .093" 10 Pair \| Parts-Express.com Molex 18-22 Gauge Pins .093" 10 Pair They just clip right in, you may have to use a small pick or screw driver to push them in till they clip in place. BTW, I use these all the time, they are awesome and they don't harm your factory wires: Posi-Taps: http://www.posi-lock.com/posiplug.html Last edited by Zuppy51; 07-12-2010 at 06:07 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Too soon to modify? thoughts/advice.	HATED1	Nissan 370Z General Discussions	29	07-07-2010 10:22 PM
Longer ipod connector?	drtony	Nissan 370Z General Discussions	2	09-12-2009 12:41 AM
Z Voted 3rd Best Car To Modify	GVick87	Nissan 370Z Photos / Spyshots / Video / Media Gallery	12	04-10-2009 08:58 AM
iPod connector cable?	dandg	Nissan 370Z General Discussions	9	02-05-2009 10:02 PM