swap hazard light switch

jayl · 06-27-2010, 01:00 PM

Hi,

So I got my NAV installed

it has a voice activation button...

I want to swap the hazard light SW to the right side where the dummy switch is ... ( the location of the sports switch in the sports model) and move that switch to the left so its easily reachable....

So after that I want to put the voice activation switch for the NAV under it...and still use the factory silver round switch for it.

I was thinking somehow to put a spring between the round silver factory switch and the NAV's voice activation switch with the Voice Activation switch under the silver round switch.

Any suggestions for doing this... has anyone done this?

Thanks,
jay

memorylasts · 06-30-2010, 01:17 PM

Why not just splice the wires into the OEM switch? It should be two wires on both and just hook the switch(OEM) to the wires for the HU? should work in theory, you might have to buy the other switch not sure if the dummy one is a switch or not.

feel free to correct me if i am wrong.

jayl · 07-06-2010, 01:15 PM

i like the idea of getting a replacement (spare ) hazard light switch and using that but not too sure about splicing the wires on the PTT button has anyone tried something like this?

Thanks,

kenchan · 07-06-2010, 03:55 PM

yah, you would need a momentary switch. hazard switch is latching type so you will need to get the Syncro rev-match on/off switch i thinks.

Paul_S · 07-06-2010, 04:08 PM

How about replacing the blank between the heated seat switches? I know someone posted up a switch which is an excellent match if only I can find it....

Edit: this is what I was thinking of - any use?

kenchan · 07-06-2010, 04:17 PM

yah, i use those on my center console. they fit very well. make sure it's a non-latching momentary switch.

jayl · 07-06-2010, 04:58 PM

Quote:

Originally Posted by Paul_S

How about replacing the blank between the heated seat switches? I know someone posted up a switch which is an excellent match if only I can find it....

Edit: this is what I was thinking of - any use?

Thanks, thats a very good idea! my reason to use the hazard / sports mode switch was laziness........ because for wiring that switch I wouldnt have to remove the entire console...

but it seems like the switch can be wired w/out removing the entire console...

lets see how it goes.....

jayl · 07-06-2010, 04:59 PM

Quote:

Originally Posted by kenchan

yah, i use those on my center console. they fit very well. make sure it's a non-latching momentary switch.

Thanks if I go that route I will make sure.

jayl · 05-06-2011, 01:29 AM

I have swapped the location of my hazard light with the dummy switch currently empty...

does anyone know for sure if the PTT button on the 9960 can be used with the SRM switch for the Z?

If anyone has other ideas for a switch that will work with the PTT button for the kenwood 9960 please let me know.. I will need a switch that will go in place of the dummy switch that i had...

Thanks,

jayl · 05-06-2011, 04:54 PM

i am thinking of cutting the top of the dummy and try to see if I can find an exact fit momentary switch to fit there or if i can fab the existing nav ptt switch..

06-27-2010, 01:00 PM	#1 (permalink)
jayl Track Member Join Date: Jun 2010 Location: md Posts: 813 Drives: 09 370z base MT Rep Power: 16	swap hazard light switch Hi, So I got my NAV installed it has a voice activation button... I want to swap the hazard light SW to the right side where the dummy switch is ... ( the location of the sports switch in the sports model) and move that switch to the left so its easily reachable.... So after that I want to put the voice activation switch for the NAV under it...and still use the factory silver round switch for it. I was thinking somehow to put a spring between the round silver factory switch and the NAV's voice activation switch with the Voice Activation switch under the silver round switch. Any suggestions for doing this... has anyone done this? Thanks, jay

06-30-2010, 01:17 PM	#2 (permalink)
memorylasts A True Z Fanatic Join Date: Mar 2010 Location: San Diego Posts: 1,125 Drives: Cars... Rep Power: 17	Why not just splice the wires into the OEM switch? It should be two wires on both and just hook the switch(OEM) to the wires for the HU? should work in theory, you might have to buy the other switch not sure if the dummy one is a switch or not. feel free to correct me if i am wrong. __________________ somewhat-journal-thingy

07-06-2010, 04:08 PM	#5 (permalink)
Paul_S Enthusiast Member Join Date: Sep 2009 Location: England Posts: 258 Drives: UK Yellow 370Z Rep Power: 16	How about replacing the blank between the heated seat switches? I know someone posted up a switch which is an excellent match if only I can find it.... Edit: this is what I was thinking of - any use? __________________ In the UK? Check out nissansportz.com - 350Z, GT-R, 370Z and more... 2004 Sunset 350Z to 2009 Limited Edition Ultimate Yellow 370Z Last edited by Paul_S; 07-06-2010 at 04:11 PM. Reason: Found link to thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hazard Flash with Lock/Unlock	Dwight Frye	Nissan 370Z General Discussions	7	10-27-2019 12:46 PM
uncommanded intermittant horn & hazard activity	martums	Nissan 370Z General Discussions	12	03-28-2010 05:47 PM
Bad Switch??...Hopefully	kgreen	Exterior & Interior	5	03-21-2010 06:12 PM
Euro Fog Light Switch	Jason	Exterior & Interior	3	06-22-2009 03:26 PM
Head Light Swap	Puma0183	Nissan 370Z General Discussions	3	05-10-2009 04:41 PM

07-06-2010, 01:15 PM	#3 (permalink)
jayl Track Member Join Date: Jun 2010 Location: md Posts: 813 Drives: 09 370z base MT Rep Power: 16	i like the idea of getting a replacement (spare ) hazard light switch and using that but not too sure about splicing the wires on the PTT button has anyone tried something like this? Thanks,

07-06-2010, 03:55 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah, you would need a momentary switch. hazard switch is latching type so you will need to get the Syncro rev-match on/off switch i thinks.

07-06-2010, 04:17 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah, i use those on my center console. they fit very well. make sure it's a non-latching momentary switch.

05-06-2011, 01:29 AM	#9 (permalink)
jayl Track Member Join Date: Jun 2010 Location: md Posts: 813 Drives: 09 370z base MT Rep Power: 16	I have swapped the location of my hazard light with the dummy switch currently empty... does anyone know for sure if the PTT button on the 9960 can be used with the SRM switch for the Z? If anyone has other ideas for a switch that will work with the PTT button for the kenwood 9960 please let me know.. I will need a switch that will go in place of the dummy switch that i had... Thanks,

05-06-2011, 04:54 PM	#10 (permalink)
jayl Track Member Join Date: Jun 2010 Location: md Posts: 813 Drives: 09 370z base MT Rep Power: 16	i am thinking of cutting the top of the dummy and try to see if I can find an exact fit momentary switch to fit there or if i can fab the existing nav ptt switch..