Nissan 370Z Forum
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Audio & Video (http://www.the370z.com/audio-video/)
-   -   started my install (http://www.the370z.com/audio-video/20942-started-my-install.html)

noTCed 06-24-2010 03:12 PM
Quote:
Originally Posted by bigaudiofanat (Post 591702)
The blue wire you use to turn on the radio antenna when the head unit is in radio mode. The blue and white wire you use to turn on any amps factory or aftermarket.
So I don't need this thing:

PAC SOEM-4 Universal 4-channel line output converter at Crutchfield.com

for a factory amp system. Just connect the blue/white P.Cont wire from the head unit to the remote turn on wire on the car harness?

:happydance:

shabarivas 06-24-2010 03:27 PM
Wow matt - you seem to be quite knowledgeable regarding this stuff - I will def bother you when I get around to doing my audio stuff :)

+rep :)

bigaudiofanat 06-24-2010 03:34 PM
Quote:
Originally Posted by noTCed (Post 591813)
So I don't need this thing:

PAC SOEM-4 Universal 4-channel line output converter at Crutchfield.com

for a factory amp system. Just connect the blue/white P.Cont wire from the head unit to the remote turn on wire on the car harness?

:happydance:
You need that only if you are using your stock head unit "non bose" in order to install a aftermarket amp. If you are using a new aftermarket head unit you do not need that. If you are installing amps and speakers with a bose system you need a mtx req 5.

bigaudiofanat 06-24-2010 03:35 PM
Quote:
Originally Posted by shabarivas (Post 591820)
Wow matt - you seem to be quite knowledgeable regarding this stuff - I will def bother you when I get around to doing my audio stuff :)

+rep :)
Thank you I try to stay on the forum all day and on aim to help people but I only have tome for that when I am not busy lol. :tup:

noTCed 06-24-2010 03:37 PM
+1 Rep

Thank you so much for the help :tiphat:

jayl 06-25-2010 08:26 PM
ok, I have the Metra axxess steering module... and the programming worked perfect but the controls dont work..... I tried to reset the unit multiple times and re program everything the programming works fine but controls done.

Help please......

jayl 06-28-2010 10:14 AM
1 Attachment(s)
Attachment 14313

kenchan 06-28-2010 11:54 AM
hey looks good, congrats jay :D


All times are GMT -5. The time now is 10:46 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2