Car Speed Signal Input and Reverse Gear Signal Input tap locations?

rdavidw · 06-06-2010, 08:46 AM

I am in the process of installing a Pioneer AVIC Z110BT in my 2010 base 370z coup. Does anyone have any info on where I tap in the pink Car Speed Signal Input and the purple Reverse Gear Signal Input wires? I am using a back-up cam. I have a voltage meter to test but don’t know where to start looking. I did not see that info listed on the install videos (very good videos) and have not been able to find the info here yet. Thanks in advance for any assistance.

kenchan · 06-06-2010, 11:48 AM

im not sure about the speed sensor line, but the rear lamp wire is orange and can be found where to look in the AK370 DIY page.

bigaudiofanat · 06-06-2010, 01:25 PM

Just a warning if you do hook this wire up to the speed sense wire you will not be able to view video or do a lot with the nav when in motion. That being said I am not sure which wire you need.

rdavidw · 06-06-2010, 05:42 PM

Quote:

Originally Posted by bigaudiofanat

Just a warning if you do hook this wire up to the speed sense wire you will not be able to view video or do a lot with the nav when in motion. That being said I am not sure which wire you need.

Thanks for the help. I have no idea what I am doing. I will not hook up the speed sense wire. Thanks again.

David

pg6speed · 06-06-2010, 06:03 PM

Quote:

Originally Posted by bigaudiofanat

Just a warning if you do hook this wire up to the speed sense wire you will not be able to view video or do a lot with the nav when in motion. That being said I am not sure which wire you need.

This is not true. Take a look at avic411.com I have done the hack on a couple of units in other cars and it works. From what I understand the unit uses gps to tell when the vehicle is in motion. The VSS just assists the gps to be more smooth and accurate. As for which wire in the Z to hook it to I'm not sure but when you find it you can hook it up, do the bypass and it will work. Congrats on the Pioneer personally I love them.

Gmendez · 11-08-2010, 11:56 PM

what hack?????

G Fo12ce · 11-10-2010, 12:39 PM

Quote:

Originally Posted by bigaudiofanat

Just a warning if you do hook this wire up to the speed sense wire you will not be able to view video or do a lot with the nav when in motion. That being said I am not sure which wire you need.

I have the speed wire hooked up on and have done the hack for the X920BT and it works.

The speed wire is shown on this post I did on the same topic. Pin 18 yellow.

PG6speed was nice enough to send me this image for the reverse wire location. When you take the loom off there are two harnesses merged. For me the one closest to the metal interior wall had the orangish tanish wire for reverse. There are 4-5 in there so youll have to test them with a meter. Should read 0 volts in gear/neutral and 11-14 with the car in reverse.

Gmendez · 11-10-2010, 01:00 PM

Awesome, thanks!

06-06-2010, 08:46 AM	#1 (permalink)
rdavidw Base Member Join Date: Apr 2010 Location: MD Posts: 29 Drives: 2010 Z Rep Power: 16	Car Speed Signal Input and Reverse Gear Signal Input tap locations? I am in the process of installing a Pioneer AVIC Z110BT in my 2010 base 370z coup. Does anyone have any info on where I tap in the pink Car Speed Signal Input and the purple Reverse Gear Signal Input wires? I am using a back-up cam. I have a voltage meter to test but don’t know where to start looking. I did not see that info listed on the install videos (very good videos) and have not been able to find the info here yet. Thanks in advance for any assistance.

06-06-2010, 01:25 PM	#3 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Just a warning if you do hook this wire up to the speed sense wire you will not be able to view video or do a lot with the nav when in motion. That being said I am not sure which wire you need. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Car Speed Signal, Illumination, Reverse wires!?	J3adSeed	Audio & Video	38	11-09-2010 04:16 PM
Side Marker/Signal LED Mod	SoCal 370Z	Exterior & Interior	10	05-02-2010 08:34 PM
anyone changed the LED in the 'Z' signal lamp?	vehl	Exterior & Interior	0	03-24-2010 03:54 AM
[HELP] Radio Signal on DNX 6140	kpyo2000	Audio & Video	22	09-23-2009 07:40 AM
Tach signal on the z370's ICU	pulgoso33	Track / Autocross / Drifting / Dragstrip	0	04-15-2009 08:58 PM

06-06-2010, 11:48 AM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	im not sure about the speed sensor line, but the rear lamp wire is orange and can be found where to look in the AK370 DIY page.

11-08-2010, 11:56 PM	#6 (permalink)
Gmendez Base Member Join Date: Mar 2010 Location: Miami, FL Posts: 114 Drives: '10 PW 370Z NISMO Rep Power: 16	what hack?????

11-10-2010, 01:00 PM	#8 (permalink)
Gmendez Base Member Join Date: Mar 2010 Location: Miami, FL Posts: 114 Drives: '10 PW 370Z NISMO Rep Power: 16	Awesome, thanks!