Axxess ASWC wiring.

fonZie

I have a 2010 Bose Touring Roadster and this is what I used with no issues. You have to manually program the unit also.

khameleon

I had seen that post before. In my case, there was no pink wire. I had a blue, but it was hooked to my LH front speaker (-). On top of that, the fact that terminals were crossed out and re-numbered confused the issue, and I just couldn't figure out what the diagram was saying. My car is Canadian, so it should be configured as the North American model...download the Sevice manual section AV page 105. That's what I have, and that's what worked for me. There must be more than one way to make the ASWC work, and there must be some variations of the wiring harness as well.
Good Luck

fonZie

FYI: Like I mentioned previously, this configuration worked for my car no problem, however I just finished an install for a buddy that has a base model and it was tough. I installed a JVC KD-HDR70 and the manual programming was funky. First the wire colors were pink and blue but the pin position was off. Pin 6 was pink but pin 17 (I believe) was the blue one and the black pin was next to it (16 I think). Anyways, that all worked out but when programming I had to program Preset Up option 7 with the button downwards and Band option 10 with the button upwards so that he could scroll thru his presets correctly... Programming Seek worked per the instructions but he didn't want it that way. Source and volume controls were fine also. If I programmed Scroll Up/Down per the manual scroll up didnt work and scroll down actually scrolled up... Weird. Works now though... I did ensure the ASWC was programmed correctly for JVC (5) led flashes.