Nismo audio upgrade- critique my planned setup

speedfreak28

Lol, dunno why your so bent out of shape because I said there were a ton of cheaper, better options than your focals. Just because you bought an overpriced set of components doesn't make your car an award winning sq install. I'd love to see the how you have the speakers imaged and how the wires are ran and terminated. SQ is a lot more install then product used.

2fast4thelaw

There are many photos and unique designs in my audio system on this site that speak for themselves. Everything in my car has been designed and engineered specifically for my car. I have even shared my subwoofer enclosure design with some of you that took countless hours of design and engineering.

I had to have a shop do the fabrication and installation because fo one, I dont have a Machine shop and a wood shop at my disposal anymore, next I didnt have the time to strip my car down to deaden it.

I have done both active and passive cossovers on my fronts and I actually gained better results from the passives but my passives have been modified and redesigned by me to taylor them for the interior of my car and the thier location. So dont go there buddy! You are outta your league.

__________________
To the optimist, the glass is half full. To the pessimist, the glass is half empty. To the engineer, the glass is twice as big as it needs to be.

37Z

[QUOTE=2fast4thelaw;503671]There are many photos and unique designs in my audio system on this site that speak for themselves. Everything in my car has been designed and engineered specifically for my car. I have even shared my subwoofer enclosure design with some of you that took countless hours of design and engineering.

Have you designed a sub enclosure in the 370Z hatch area located in front of the rear cross bar area (i.e. where the foam piece is located)? It may allow a 8" sub if the top of the sub enclosure is angled. I plan to install the amp (JL Audio HD 600/4 or 900/5 for its size) in this location as well. I plan on making the sub enclosure out of composite RFP (i.e.lightweight,dense,able to form curves). Any sub enclosure design thoughts would be appreciated! I can PM back with pics.