stock speaker wire color config.

tbonesteak · 03-22-2010, 09:29 PM

Hey guys,

There is a green wire and a purple wire for the stock base non bose speakers. Which of the two is the positive? Thanks in advance.

bigaudiofanat · 03-22-2010, 11:16 PM

Um, I take it you cut your harness on your z?

If that is the case take a volt meter and check the wires to see which one is the +.

If these are the wires on your head unit harness the purple is for revers video an the green should be grounded to be able to watch video while the car is in motion.

tbonesteak · 03-23-2010, 01:55 AM

i didn't cut the harness. i just took off the door panels to start on the project and am getting rid of the preliminary issues. there is no way to tell which one is + just by looking and i thought someone would know.

Flojo · 03-24-2010, 07:25 PM

If the speaker plug only fits one way then you can use the factory speaker as reference. Get a AA battery and tape a wire lead to each side of the Battery. Take the two leads and connect to the factory speaker. If it pushes out then you have positive to positive, if it pulls in then it is reversed.

bigaudiofanat · 03-24-2010, 08:45 PM

Your best way to do it is to run new wires threw the door panels and start over. But if you want to sue your stock wiring, look at the connectors you cut one of the connectors should be bigger than the other, that one is your + or look on the speaker itself for the polarity.

jikhead · 03-26-2010, 01:23 AM

If you look in the service manuals on here, they can tell you which wires are what, and what is (+) and (-). I used the manual to do this back in January so I it works.

1slow370 · 03-26-2010, 06:02 AM

on the side that is blue purple (left)blue is positive on the side that is green purple (right) purple is positive. yeah it switch colors for the ground and it really stupid.

03-22-2010, 09:29 PM	#1 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	stock speaker wire color config. Hey guys, There is a green wire and a purple wire for the stock base non bose speakers. Which of the two is the positive? Thanks in advance.

03-22-2010, 11:16 PM	#2 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Um, I take it you cut your harness on your z? If that is the case take a volt meter and check the wires to see which one is the +. If these are the wires on your head unit harness the purple is for revers video an the green should be grounded to be able to watch video while the car is in motion. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

03-24-2010, 08:45 PM	#5 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Your best way to do it is to run new wires threw the door panels and start over. But if you want to sue your stock wiring, look at the connectors you cut one of the connectors should be bigger than the other, that one is your + or look on the speaker itself for the polarity. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

03-26-2010, 06:02 AM	#7 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	on the side that is blue purple (left)blue is positive on the side that is green purple (right) purple is positive. yeah it switch colors for the ground and it really stupid. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Titanium Gray 370Z z34 color thread (color NOT available in the US)	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	21	01-21-2014 05:46 PM
any recommendation for rim color on black cherry: design, color, etc...	BlackCherryZ	Wheels & Tires	13	04-23-2010 05:58 PM
RCA cables and power wire	BobQ	Audio & Video	16	02-27-2010 09:07 AM
Nismo S-Tune Exhaust (15-5850) vs. Nismo H-Pipe Config Exhaust	scruffydog	Intake/Exhaust	7	07-17-2009 07:33 PM

03-23-2010, 01:55 AM	#3 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	i didn't cut the harness. i just took off the door panels to start on the project and am getting rid of the preliminary issues. there is no way to tell which one is + just by looking and i thought someone would know.

03-24-2010, 07:25 PM	#4 (permalink)
Flojo Base Member Join Date: Nov 2009 Location: New York Posts: 8 Drives: Nissan 370 Gray M6 Rep Power: 16	If the speaker plug only fits one way then you can use the factory speaker as reference. Get a AA battery and tape a wire lead to each side of the Battery. Take the two leads and connect to the factory speaker. If it pushes out then you have positive to positive, if it pulls in then it is reversed.

03-26-2010, 01:23 AM	#6 (permalink)
jikhead Enthusiast Member Join Date: Jun 2009 Location: Little Rock, AR Posts: 425 Drives: 09 370Z Blue 6spd Rep Power: 184	If you look in the service manuals on here, they can tell you which wires are what, and what is (+) and (-). I used the manual to do this back in January so I it works.