Nav/Dvd hack for 2010

terrycs · 03-09-2010, 11:09 AM

Quote:

Originally Posted by toc2rta

Yes i understand that it requires a switch to disable/enable the hack. If you look at the pictures i posted you can see the connectors arn't even the same size as the ones listed in the 09 FSM. There is a 32 pin connector and a 18 pin connector.

Where are the pictures you posted? The ones in the link from post #2 is for the G, so the connectors could be different. Also keep in mind that different versions of the Z within the same model year could have different connectors; but I doubt there will be a change between 2009 and 2010 model years.

toc2rta · 03-09-2010, 11:15 AM

These are the pictures.. The pinouts on these don't match the wiring diagram from the 09 FSM.

http://www.cmw.me/nav1.jpg
http://www.cmw.me/nav2.jpg
http://www.cmw.me/nav3.jpg
http://www.cmw.me/nav4.jpg

toc2rta · 03-09-2010, 11:26 AM

So i was right. The wiring on the 2010 370z is different to that of the 2009. I purchased the FSM on ebay. I uploaded the AV file to my site as you can see it looks like it's pin 65 for the brake and 82 for VSS.

http://www.cmw.me/AV.pdf

hopefully this should help out anyone else who was looking for the bose navigation wiring as well.

terrycs · 03-09-2010, 11:48 AM

Quote:

Originally Posted by toc2rta

These are the pictures.. The pinouts on these don't match the wiring diagram from the 09 FSM.

Thanks for the pics, I re-upped them as IMG links. I can't tell by just looking at the connectors. Unless there are some MAJOR changes in the AV system, I'm almost certain that the 2009 FSM still applies for the 2010 M.Y.

Are you are sure you are looking at the right FSM diagram for the model WITH navigation and not the one WITHOUT navigation? I would check for you but I do not have my FSM here at work.

EDIT: Just saw your PDF post. Confirmed 82 for VSS and 65 for parking brake. So just ground 65 from the head unit and put a switch on 82.

toc2rta · 03-09-2010, 01:53 PM

Ok so i had some time on my lunch break. It worked perfectly. I took a few pictures and labeled the pins.

03-09-2010, 11:26 AM	#3 (permalink)
toc2rta Base Member Join Date: Mar 2010 Location: nyc Posts: 14 Drives: 370z touring 2010 Rep Power: 16	So i was right. The wiring on the 2010 370z is different to that of the 2009. I purchased the FSM on ebay. I uploaded the AV file to my site as you can see it looks like it's pin 65 for the brake and 82 for VSS. http://www.cmw.me/AV.pdf hopefully this should help out anyone else who was looking for the bose navigation wiring as well. Last edited by toc2rta; 03-09-2010 at 11:34 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My 2010 Z	jayhuffdaddy	Nissan 370Z Pricing / Ordering Discussions	46	03-04-2015 08:03 PM
My New 2010 370 z	MasterZUUL	Member's 370Z Gallery	14	01-06-2010 12:09 PM
2010 Nissan/ Infiniti National Convention, June 2010	Nismo Titan	Mid Western Region	0	12-01-2009 01:17 PM
Intake hack	simota1	Exterior & Interior	24	11-19-2009 09:13 AM
2010 Chevrolet Camaro SS vs. 2009 Dodge Challenger R/T vs. 2010 Ford Mustang GT	AK370Z	Other Vehicles	34	04-06-2009 05:39 PM

03-09-2010, 11:15 AM	#2 (permalink)
toc2rta Base Member Join Date: Mar 2010 Location: nyc Posts: 14 Drives: 370z touring 2010 Rep Power: 16	These are the pictures.. The pinouts on these don't match the wiring diagram from the 09 FSM. http://www.cmw.me/nav1.jpg http://www.cmw.me/nav2.jpg http://www.cmw.me/nav3.jpg http://www.cmw.me/nav4.jpg

03-09-2010, 01:53 PM	#5 (permalink)
toc2rta Base Member Join Date: Mar 2010 Location: nyc Posts: 14 Drives: 370z touring 2010 Rep Power: 16	Ok so i had some time on my lunch break. It worked perfectly. I took a few pictures and labeled the pins.