autoradio 370Z 2009 2021

Splinter

I installed mine a few days ago.

The unit comes with harnesses for both nav and non-nav models. I installed in a non nav and was left with an adapter for the factory usb port and factory back up camera.

The knobs at the bottom from left to right control volume, temperature, and fan speed. AC can be controlled thru the knobs or thru the touch screen. the knobs and buttons are RGB backlit and can be customized. Left "power" button mutes audio and right power button turns on/off climate.

Steering wheel controls work out of the box!

Let me know if you have any other questions!

__________________
2011 Gun Metallic 370Z Base w/ Sports Package 6MT
Mods: HKS Hi-Power, Test Pipes, Black Z1 Stillen G3s, Swift Springs, 20mm spacers F&R, AuCar 13.6' Android Screen, Backup Camera, G35 Homelink, Rear fog

ct9812

I order the same aucar 13.6 android screen but my AC white box doesn't have the 10 pin male plug. My audio head is type 1. (No navigation)
Where do you connect to control the AC knobs?

Splinter

Hey my install was also a type 1. The harness that came with the head unit should have all the plus necessary. Aucar has an install video if you need a visual.

__________________
2011 Gun Metallic 370Z Base w/ Sports Package 6MT
Mods: HKS Hi-Power, Test Pipes, Black Z1 Stillen G3s, Swift Springs, 20mm spacers F&R, AuCar 13.6' Android Screen, Backup Camera, G35 Homelink, Rear fog

ct9812

Yes. I did look at their install video. But my AC box doesn't have the 10 pins plug.

Attached Images

370Z AC box.jpg (98.2 KB, 15 views)

Splinter

It's been a while since i installed mine but looking back at the install video you just leave that box connected to the car harness and shove it back in the dash

__________________
2011 Gun Metallic 370Z Base w/ Sports Package 6MT
Mods: HKS Hi-Power, Test Pipes, Black Z1 Stillen G3s, Swift Springs, 20mm spacers F&R, AuCar 13.6' Android Screen, Backup Camera, G35 Homelink, Rear fog

ct9812

I was confused with their instruction picture. The arrow points to the 10 pin plug is actually on the back of the control knob. Not on the AC box we need to keep.
Thanks

Da Flash

Hey Splinter. When you say that you got the steering wheel controls working was this with or without a Axxess ASWC module?

NorthStyle

It doesn't require the ASWC

Da Flash

Thanks for the reply NorthStyle! Well so much for an easy answer as to why my steering wheel controls aren't working. Do you know if the controls are routed through the 20pin power harness?