Audio question
 

Hey guys, I picked up the following Alpine receiver with android auto for a good price at Best Buy.

https://www.bestbuy.com/site/alpine-...?skuId=6333656

Can someone confirm if the 4 channel line output converter and the universal analog steering wheel interface are needed?

I have a 2017 Nismo no navi with Bose. Think I recall just the wiring harness, dash kit and maybe a cheaper steering wheel control connector. The 4 channel line output and steering wheel interface are about $70 each there.

Thanks

Update: went ahead and installed it without the PAC and I got a bunch of white noise as well as the speakers being really loud at only volume 5 of like 30. (No harm done though)


Finally did a little bit of research on here and yep.. definitely do need the PAC to use the factory BOSE amp at the right frequencies or something. Very mechanical but not an audio guy at all, haha.

You need a 7553. Plug in and done.

https://www.amazon.com/Metra-70-7553...tronics&sr=1-6

Thanks man! I was hoping you were around!! I've been reading a lot of your posts. Looks like this harness already has the speaker wires coming out as RCA's? I'll order it up now :tup:

:tup:

No speaker wires on this one just RCA's these plug directly into the RCA outputs of your new alpine head unit.

This worked great and was very easy to still^^^^^