New install - integrating OEM features (questions)

Jonitus · 06-09-2019, 07:24 PM

I had a stereo system installed in my Z a couple months ago. The workmanship guarantee has lapsed, and like my luck runs, the stereo system has started having issues. On my own investigation, the install looks to have been done rather sloppy.

I'm going to give another shop a chance at making this right, so I'm swapping out the current system for a new one, but I wanted to ask:

Can you, or do you now, have use of the factory USB and AUX ports in the center console? I don't. I want them.

I don't like having extra crap mounted up, so I'm wondering if I could forego the external volume control for my powered subwoofer?

tRidiot · 06-10-2019, 10:41 AM

Tapping into the factory aux and USB should be easy enough for any decent shop, I know my installer could. This assumes your headunit has those inputs.

As for your external volume, I'm not sure about that... you're talking about a remote gain control, I assume? Most of those you can just set it at a level and forget it, and if it is run off a dedicated output from your headunit, lots of them will allow you to adjust them through the headunit's menu, or just leave it set at a certain level all the time, if you prefer.

Jonitus · 06-10-2019, 01:58 PM

Thanks for the reply. I would have thought it easy enough to integrate the factory USB and AUX ports into my system, but apparently not since my shop neglected to even try that. As for the sub, yeah I suppose it's best decribed as a remote gain. I just don't want to mount that up if I don't have to and can set the gain on the unit and then control the bass output from the headunit through the EQ.

06-09-2019, 07:24 PM	#1 (permalink)
Jonitus Base Member Join Date: Apr 2019 Location: US Posts: 32 Drives: nothing Rep Power: 39	New install - integrating OEM features (questions) I had a stereo system installed in my Z a couple months ago. The workmanship guarantee has lapsed, and like my luck runs, the stereo system has started having issues. On my own investigation, the install looks to have been done rather sloppy. I'm going to give another shop a chance at making this right, so I'm swapping out the current system for a new one, but I wanted to ask: Can you, or do you now, have use of the factory USB and AUX ports in the center console? I don't. I want them. I don't like having extra crap mounted up, so I'm wondering if I could forego the external volume control for my powered subwoofer?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Some questions after HFC install	NRGz	Intake/Exhaust	2	06-30-2017 04:21 PM
Last minute install questions	Crucified	Audio & Video	5	06-25-2016 12:36 AM
Questions for aam s-line midpipe install	Zero dark	Intake/Exhaust	0	07-14-2015 07:45 PM
sway bar install questions	370guy	Brakes & Suspension	4	04-10-2012 10:20 AM
Integrating MacMini for tuning/entertainment	Viking	Audio & Video	5	07-26-2011 01:00 PM

06-10-2019, 10:41 AM	#2 (permalink)
tRidiot Base Member Join Date: Oct 2013 Location: OK Posts: 178 Drives: '09 370Z Sport Rep Power: 9972	Tapping into the factory aux and USB should be easy enough for any decent shop, I know my installer could. This assumes your headunit has those inputs. As for your external volume, I'm not sure about that... you're talking about a remote gain control, I assume? Most of those you can just set it at a level and forget it, and if it is run off a dedicated output from your headunit, lots of them will allow you to adjust them through the headunit's menu, or just leave it set at a certain level all the time, if you prefer.

06-10-2019, 01:58 PM	#3 (permalink)
Jonitus Base Member Join Date: Apr 2019 Location: US Posts: 32 Drives: nothing Rep Power: 39	Thanks for the reply. I would have thought it easy enough to integrate the factory USB and AUX ports into my system, but apparently not since my shop neglected to even try that. As for the sub, yeah I suppose it's best decribed as a remote gain. I just don't want to mount that up if I don't have to and can set the gain on the unit and then control the bass output from the headunit through the EQ.