Wiring adapter?

1slow370 · 01-06-2010, 03:49 AM

does anybody know if they make the wiring adapter for a base yet so i don't have to cut off the stock connectors?

Sigur · 01-06-2010, 07:18 AM

scosche.com

postrin · 01-06-2010, 07:36 AM

Scosche NN04B or Metra 70-7552, you'll also need an antenna adapter, Metra 40NI12

bigaudiofanat · 01-06-2010, 08:00 AM

For the base model yest that has been out for a while. Both scosche and metra make a wiring harness for the z. I recommend going with the scosche as the metra I have heard that not all the wires are there that are needed. Also you will need the antenna adapter as well as mentioned above get that as well from scosche.

bigaudiofanat · 01-06-2010, 08:35 AM

Quote:

Originally Posted by Sigur

scosche.com

That will not work for some reason they do not show anything for the 370z. Benn like that for a while.

vipor · 01-06-2010, 09:28 AM

Quote:

Originally Posted by bigaudiofanat

For the base model yest that has been out for a while. Both scosche and metra make a wiring harness for the z. I recommend going with the scosche as the metra I have heard that not all the wires are there that are needed. Also you will need the antenna adapter as well as mentioned above get that as well from scosche.

lots of times metra will slack on the illumination/dimmer wires where you may only end up with one, the other, or neither. i haven't done any research on this specific harness, but it's been somewhat common for a long time. either brand will work just fine, but i find it quite annoying when a stereo supports dimming but all you have to hook up to it is an illumination wire. no adjustable brightness, just day mode and night mode.

OP: props for not being a tard and lopping off the plug as most people do

bigaudiofanat · 01-06-2010, 09:36 AM

Yes props for not cutting that harness off! +1 vipor

Sigur · 01-06-2010, 11:49 AM

The scosche one I got didn't have wires for SWI. It did have wires for rear speakers that are available to rob if you want to have SWI.

vipor · 01-06-2010, 11:56 AM

the steering wheel interface is a different set of wires all together. typically a separate plug. plus you can't merely wire them in to the 1/8" jack on the rear of most aftermarket units. it requires an actual interface

Pac-Audio.com Product Details | iPod Integration for your car and More by Pac-Audio - Connecting you to the future - JVC, Alpine, Clarion, Kenwood
Pac-Audio.com Product Details | iPod Integration for your car and More by Pac-Audio - Connecting you to the future - Eclipse
Pac-Audio.com Product Details | iPod Integration for your car and More by Pac-Audio - Connecting you to the future - Pioneer, Sony
Pac-Audio.com Product Details | iPod Integration for your car and More by Pac-Audio - Connecting you to the future - Universal (these are blah)

vipor · 01-06-2010, 11:56 AM

double post

Sigur · 01-06-2010, 01:04 PM

Yea, you need a separate interface but the wires from the steering wheel buttons are in the same plug that goes into the factory radio. My point being that if you don't want to cut into the factory harness you'll need to add the 3 wires to the scosche harness and it's easy to rob the rear speaker wires since they are not used in the base Z. So factory plug to scosche harness (same as all the other radio wires) to SWI module to aftermarket radio SWI plug.

bigaudiofanat · 01-06-2010, 03:56 PM

Quote:

Originally Posted by vipor

the steering wheel interface is a different set of wires all together. typically a separate plug. plus you can't merely wire them in to the 1/8" jack on the rear of most aftermarket units. it requires an actual interface

Pac-Audio.com Product Details | iPod Integration for your car and More by Pac-Audio - Connecting you to the future - JVC, Alpine, Clarion, Kenwood
Pac-Audio.com Product Details | iPod Integration for your car and More by Pac-Audio - Connecting you to the future - Eclipse
Pac-Audio.com Product Details | iPod Integration for your car and More by Pac-Audio - Connecting you to the future - Pioneer, Sony
Pac-Audio.com Product Details | iPod Integration for your car and More by Pac-Audio - Connecting you to the future - Universal (these are blah)

You got it.

01-06-2010, 03:49 AM	#1 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	Wiring adapter? does anybody know if they make the wiring adapter for a base yet so i don't have to cut off the stock connectors?

01-06-2010, 08:00 AM	#4 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	For the base model yest that has been out for a while. Both scosche and metra make a wiring harness for the z. I recommend going with the scosche as the metra I have heard that not all the wires are there that are needed. Also you will need the antenna adapter as well as mentioned above get that as well from scosche. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ Last edited by bigaudiofanat; 01-06-2010 at 08:33 AM.

01-06-2010, 09:36 AM	#7 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Yes props for not cutting that harness off! +1 vipor __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

01-06-2010, 11:56 AM	#9 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	the steering wheel interface is a different set of wires all together. typically a separate plug. plus you can't merely wire them in to the 1/8" jack on the rear of most aftermarket units. it requires an actual interface Pac-Audio.com Product Details \| iPod Integration for your car and More by Pac-Audio - Connecting you to the future - JVC, Alpine, Clarion, Kenwood Pac-Audio.com Product Details \| iPod Integration for your car and More by Pac-Audio - Connecting you to the future - Eclipse Pac-Audio.com Product Details \| iPod Integration for your car and More by Pac-Audio - Connecting you to the future - Pioneer, Sony Pac-Audio.com Product Details \| iPod Integration for your car and More by Pac-Audio - Connecting you to the future - Universal (these are blah) __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

01-06-2010, 11:56 AM	#10 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	double post __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

01-06-2010, 07:18 AM	#2 (permalink)
Sigur Base Member Join Date: Sep 2009 Location: Houston, TX Posts: 92 Drives: 09 370Z BS M6 Rep Power: 16	scosche.com

01-06-2010, 07:36 AM	#3 (permalink)
postrin Base Member Join Date: Dec 2009 Location: Houston Posts: 23 Drives: Tacoma Rep Power: 16	Scosche NN04B or Metra 70-7552, you'll also need an antenna adapter, Metra 40NI12

01-06-2010, 11:49 AM	#8 (permalink)
Sigur Base Member Join Date: Sep 2009 Location: Houston, TX Posts: 92 Drives: 09 370Z BS M6 Rep Power: 16	The scosche one I got didn't have wires for SWI. It did have wires for rear speakers that are available to rob if you want to have SWI.

01-06-2010, 01:04 PM	#11 (permalink)
Sigur Base Member Join Date: Sep 2009 Location: Houston, TX Posts: 92 Drives: 09 370Z BS M6 Rep Power: 16	Yea, you need a separate interface but the wires from the steering wheel buttons are in the same plug that goes into the factory radio. My point being that if you don't want to cut into the factory harness you'll need to add the 3 wires to the scosche harness and it's easy to rob the rear speaker wires since they are not used in the base Z. So factory plug to scosche harness (same as all the other radio wires) to SWI module to aftermarket radio SWI plug.