3 way Component speaker system

Tusharp83

Anyone running 3 way comp speakers system. All of the kits were too big for dash. After researching a lot I came across this.

Brand X 3 Way Component Speaker system
BRAND-X XXLHDS3
https://www.halfpricecaraudio.com/BR...8aAgvwEALw_wcB

I got a deal on eBay for $99 bucks. Going to give it a try.
If you guys are running different 3 way. Can you post what you guys are running?

The Weapon

I'm really digging Audiofrog right now.

I'll be updating my focals kr components to all audiofrog gear soon.

GB10 in a pillar
GB25 in dash
GB60 in door

if you are not running active you'll need to purchase crossovers separately as well.

I have the pair of GB25 and they are just absolutely amazing and fits in the dash where the stock tweeter was located with some slight modification to bold down.

I was hesitant to put a hole in my A Pillar but they are cheap enough to replace so i went ahead and did it. I think the GB10 will fit better then the Focal tweeter but it doesn't look too bad right now.

powered by Focal FDP 6.900
Audiocontrol DM810 is handling the crossover and TA.

__________________
Boosted Performance Comp Turbo - Tuner- CJM Fuel Return- Modified Berk CBE- ZSpeed Stage 4 Clutch - Southbend Flywheel - Tuned by Seb ~650whp - HKS Coilovers - SPL - Focal Audio 4 way Active - Audiocontrol DSP - Work CR 2P

RonRizz

Audiofrog is definitely fantastic stuff, and all the rage right now, But somehow I feel like the OP might not consider them at about $1400 over the $99 he paid for the Brand X set....Lol
You gotta be pretty fanatical about your tunes to pay retail for the Frogs. I do like the fact that they come with a whole host of hardware for mounting options.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

Tusharp83

LOL I'm Not cheap
You didn't get what I was trying to say.. I spent pretty good money on my car. I said to try them out since they are 99 only. Which means I give a damn about spending that to just try them out. Who knows I might like them and I won't so on to the next one. That is why I was asking on this post everyone to post their setup so I can get ideas.

DrNumbers

Price isn't everything, but $100 for a full component set is blowing my mind. I wish you luck with those components.

Front Stage: Audible Physics Brahmas, Audible Physics V2 in dash (midrange), and HAT L1pro tweeters in sail panels.
Subs: 2 HAT c8sw
Amps: Zapco ZLX150.6 and Zapco ST-800XM
DSP: Audison bit-one

In the next month or so, I'm replacing my amps with Tru Technology amps (T4 and T2 Grande). And the subs are going to be replaced with either 2 Raven 10XL subs, or a 12" illusion carbon sub.
Within a couple months after that, the tweeters will be replaced with Micro Precision Z-series.

So if you (or anyone else) would like to pick up some audio equipment (tweeters with sail panels included, two 8" hybrid audio clarus subs, or my zapco amps) in excellent shape (only been ran about 8 months) at great prices, let me know. I still have all the original boxes too.

Tusharp83

I already bought the box from zenclosure. Which handles 2 10". Thanks though

RonRizz

Didn't mean it to sound that way.... And I can't blame you for trying them out for $100, either. I have always been a firm believer that more $$ doesnt make better sound.
I used to run a $1000 Hertz set. Currently I am running
Sub----Stereo Integrity BMmkiv (soon to be replaced with 2 BMmkv's)
Low----Stereo Integrity TM65v2
Mid-----Dayton Audio RS75-4
High----Stereo Integrity TM25

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

Tusharp83

So far this thing looks fantastic. Came in suitcase. For $99 bucks lol.







I will update with some more pictures as soon as I get to install them.

Tusharp83

Questions on this stats for the Midbass Driver. It seems unbelievable.

6.5'' Midbass Driver

Grey Ultra-Lite Pulp Woofer Cone With Colth Surround
High Density Ferrite Magnet
1'' High Temperature Nsv, Ccaw Voice Coil
Hand Polish Chromed Frame And Magnet Cover
Power Handling: 1000 Watts Rms / 2000 Watts Max.
Impedance: 4 Ohm
Frequency Response: 80hz-21 Khz

2'' Silk Dome Midrange

Neodymium Magnet
60 Watts Rms / 120 Watts Peak
Frequency Response: 800hz-4khz
Impedance: 4 Ohm

1'' Silk Dome Swivel Tweeter

Neodymium Magnet
3 Mounting Options: Flush ,Surface And Angle Mount
50 Watts Rms / 100 Watts Peak
Frequency Response: 1.4k-24khz
Impedance: 4 Ohm

Should I use the crossover and get 2 Channel AMP or get 6 Channel Amp to drive them separately?

The Weapon

i would do 6ch or at the very least bi-amp on 4 ch with 6" separate with bandpass crossover on amp and mid/high on the passive network.

Most 3 way systems i've seen require bi-amping at a minimum but i can't really see the crossovers on these.

__________________
Boosted Performance Comp Turbo - Tuner- CJM Fuel Return- Modified Berk CBE- ZSpeed Stage 4 Clutch - Southbend Flywheel - Tuned by Seb ~650whp - HKS Coilovers - SPL - Focal Audio 4 way Active - Audiocontrol DSP - Work CR 2P

Tusharp83

Let me get this straight you are saying get 4ch amp and and have 1ch run to crossover and 2ch run to crossover 3 and 4 running separate for each midbass right?

The Weapon

That's correct. its just a workaround with what you got.

But if you plan on going all out I'd just get what you need now. Especially if you want to give those speakers a fighting chance.

I agree with Bigaudiofan that you get what you pay for but i also think you can make some of the crappiest speakers work with the right install, tuning and clean power.


There are a lot of new 6ch amps out now that have built in DSPs. You can get one of those. I'm also assuming any subs are on a separate amp.

__________________
Boosted Performance Comp Turbo - Tuner- CJM Fuel Return- Modified Berk CBE- ZSpeed Stage 4 Clutch - Southbend Flywheel - Tuned by Seb ~650whp - HKS Coilovers - SPL - Focal Audio 4 way Active - Audiocontrol DSP - Work CR 2P

RonRizz

what are you using for head unit?
that may come into play if you want to use a 6 channel amp.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

Tusharp83

I have Kenwood 9703s

RonRizz

Are you running a Sub, and if so, is it on its own amp?

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals